SKILSAW SPT99-11 10 Inch Heavy Duty Worm Drive Table Saw with Stand, Silver

We looked everywhere for a 25" table saw, but we could not find it. The miter saw I have is always so accurate that I'm amazed at how good There are eight DeWalt's products in this series. This cannot be achieved by 25). The images these saws produce are not to be disappointed in Despite being squared out of the box, the blade and fence were not. We easily adjusted the fence measurement guide after it was off by one sixteenth of an inch. I was very satisfied with the riving knife. It was dead accurate to set the blade stops at 45 and 90 degrees. I decided to use a Diablo 40 tooth blade for my first cut (one of the needleboards Skilsaw recommended). It tore through 3/4" plywood like a hot knife through butter leaving a cutting edge as clean as the factory's. Moreover, my Shopvac caught all of the dust from the saw through the dust port (no adapters needed, just plug in the 2-Inch The saw can be connected directly to the 1" hose). The only thing I don't like is the miter gauge on the saw. I didn't really like it because it has some play in the track and is pretty cheaply made (although it was set at exactly 90 degrees). There is a Dewalt's saw in the store as well, and that one is not much better. I guess this is standard for While everything else is well designed and feels high quality, the menus are poorly thought out. It is easy to installed and to remove the guards, and all accessories are stored onboard securely. A storage spot for push sticks is located I'll be right there to help You'd want it to be on the front just where you'd want it so you could grab it quickly.

It may be a different color than my Dewalt miter saw, but it's on the same level. This is a highly recommended book.

Harmony Rubio

| Mar 25, 2021

Here's the news It is clearly from Amazon's perspective that they do not want customers to see the poor customer service I received from them in my last update. A new saw was sent to me by Skilsaw. While I am not sure if the top is flat yet, they are at least standing behind their product. Amazon just wanted me to take a refund while their supervisors Initially, I had been eagerly awaiting this saw for my workshop, but I now realize that I was mistaken. As a result of my extensive research, I've decided that it may be the best worksite saw available on the market. Despite that, I have not even been able to turn it on a single time. The only reason I'm giving this product 1 star is because, out of the box, during the setup/check process as described in the manual, I noticed that the saw top wasn't even level across its My combo square “teetered” when laid from the top near the blade toward the outside corners, as soon as I placed it on top. My call to Skilsaw just led to the announcement that Amazon should handle the order. Although I am aware of Amazon being the seller. It wasn't manufactured by them. In this case, it's a Skilsaw tablesaw, so Skilsaw ought to make things right and send me a new saw to swap, hopefully one that is built right. The product is currently out of stock at Amazon, so I must wait until they replenish their inventory. I guess Skilsaw's "Stay True" 180 day guarantee isn't all it's cracked up to be. Even if they were supposed to honor it, they didn't. simply passed the buck to someone else.

Amari Coffey

| Mar 05, 2021

I have to deal with it, but you don't. It's interesting that you suggest a worm drive for the skill saw There are several reasons why this one does not measure up. One of them is There is no reliable way to control the angle of the blade, either with the lever to guide or with the lever to lock the stand. A new update was posted on 9/19. This junk item has only been in my possession for a little over a year. It appears that the saw blade depth crank handle as well as the locking lever has completely broken off. It was too late to get help from Skilsaw as the warranty had expired. Skilsaw was a brand that we were able to count on to make great tools in the past. The Chinese are now just throwing garbage away. It is a betrayal of trust. This is not a good purchase.

Kamdyn Deleon

| Mar 31, 2021

The saw is good enough (at least at There is one major issue with it, and that is that the fence lock bends and causes the fence to be The part will be ordered and replaced as soon as possible. As a result of my poor review, they contacted me. For parts, they sent me to Bosch (the old parent company). It is not possible to order parts for this saw from Bosch. This saw is extremely difficult to repair, and I would really like to return it and get something else with a more mainstream appeal, as they might have the parts if.

Addilyn Dodson

| Jun 11, 2021

My family and I have been doing home improvements for years, and we use the Dewalt saw often. With better features, a 10 inch blade, and a durable stand on this saw, I consider this saw to be of a higher quality than the Dewalt! The saw is very well organized with all parts stored in the right places! There is a saw I am looking for with a wood fence that moves with a dial rather than being positioned separately front and back! Kitchens are my specialty and in order to do those correctly, the fill pieces between cabinets need to be precisely measured! There is no doubt that this saw is worth considering. The s has not been specified! Adjust the left leg of the front so that it accommodates uneven The leg end must be turned after the clasp has been opened! The threaded rod turns slowly because it has a threaded base.

Royal Ballard

| Apr 27, 2021

I only used it twice. It never really served a purpose for me, so I let it sit. now I have decided to add french cleats to the garage wall, so I knew a good table saw would make the job much I conducted a lot of research and found SKILSAW to be the best quality product within my budget. Although the big steel table saws are impressive, there's no doubt that they take up a lot of room. Despite its limitations, my SKILSAW has so far done a good job at ripping There are several storage spots for accessories in the fence system which I really love. I do not have an idea about its portability since mine is permanently anchored to a workbench. While not as light as a lead anchor, it is not as heavy as an anchor with lead. The next thing I plan to do with it is make.

Kasen Vargas

| Apr 22, 2021

Since I'm a Dewalt person, I mostly use that brand. A great deal of accuracy and ease of use are provided. This is a well-built product and I am sure it will last a long time. Find out what I mean by doing your research.

Phillip Duncan

| Apr 06, 2021