Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The sled has an indexing plate that makes it easy to remove the saw from the sled and reattach it at the same place. As mentioned earlier, this works fairly well, but it's not perfect, as the indexing plates are too small to ensure that the saw is set exactly according to the initial settings. Although it is not ideal, at least it is better than nothing, and it should be a good starting point so long as you're using the same saw and blade. For the same saw, you will need to repeat the setup procedure using a blade that has a wider kerf. It should take you only a few minutes and a single
The kit includes a kma2685 and a 48 inch cutting guide, so wider boards can be cut. A 24 inch cutting guide, the kma2685 allows you to cut up to 24 inches. Using the cutting guide, you can accurately cut across boards, no matter the
That's the way it should be. The Makita saw I am using is the left hand model.
In all likelihood, it is A lot of saws can be used with this cut
Selected User Reviews For Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide
All you'll read is that there is one criticism. You can check out the reviews on YouTube for This is a great company. There are no complaints, the only criticism is that users wish the KMA2700 Accu-Tie was smaller Gude track should be 48 inches in length. Despite the full 96 inch length of the plywood, I could still manage to cut it. That would be great if they could do this The hint. The ground should be covered with a 4x8ft piece of rigid insulation foam. A table or a shelf is a good choice. You can easily make your Kreg cuts using these two tools. When not in use, we just have to find a place to store the big piece of rigid foam. Isn't it awesome if you could hang right overhead in your workshop or garage?.
For instance, if you work with wood on a table saw as your main tool. Whether you want to tackle just a few projects a year or you are a little more ambitious, this is for you. As part of the design process of my dining room design, I used the rip cut to construct the feature wall, I cut 1 inch wide strips of wood from a 24 x You should just walk slowly
And make sure your cuts are accurate.
are two items that I have found to be helpful. I had a great time camping. I am not the owner of a truck, I have a suv instead. I am planning to build a few sliding glass bookcases to hang on the wall. We went to Home Depot to get plywood for making cabinets. The wood was ripped into 15" x 8' pieces and transported that way. How come this is happening? When I verified the length of the 15" x 8' boards, I found out that the last 3 and a half feet were cut at 15 and a half inches This is 1/8". If he lifted the lattice wood while sliding through the saw, it must have picked it up. This put me in a bad mood. The 48" Guide Track System is a spectacular system, and I was amazed to see no saw marks on the edge of the tracks I have both boards at exactly 15". The sides of the board lined up exactly. We used the Precision Edge Guide on the bottom. Most of the rest of the computers are also in the same state. You've got a straight cut there, man. The design is amazing, I am extremely happy with it. I think these two items are better than your average when it comes to working with 4'x8' sheets of wood. This saw is for table tops. Please pay attention. It would be very hard to handle a massive piece of wood by yourself if no one was present. I'm very happy with the design of both 48 and 52 The inch guide track system and the inch guide track system This is rip- Remove 24 of the 24 I bought the inch precision edge guide for my Marlin worm drive saw and it worked beautifully. I'm very pleased with this purchase.
The saw works beautifully for straight cuts, but if you try to do a 45 degree trimming, it will not work. Make sure you have extra wood available when you set up for the first time. It poses some challenges with the Track Guide and accurate work, but it is better than free hand. This is not a FESTOOL item, but it may come in handy once in a while if you are patient -- not a FESTOOL item.
I attached it easily to my saw and was able to make easily repeatable and precise rip cuts in 2x12 lumber. Track saws are used by the poor, so this is the poor man's version. A dozen 10 foot planters could be built with it in no time. the edge guide ripping attachment, as well as the long track guide, for this project, which I could not justify buying a track saw for. I ripped sheets of plywood and 2x12 lumber, as well as made numerous cross cuts with this tool. I would highly recommend it. It would be great if they made a router base for.
It's not yet my turn to test out the 48" track system, so I can't give you a full review of it. The only reason I am glad I didn't give up on this is because I almost did. Try watching a few videos on YouTube before your first cut. I keep a 2" foam insulation sheet in the garage that is 4' x 8'. It goes on the table first and then I lay the plywood over it. So long as you go slowly, you will not slide on the wood. There is a high level of cleanliness and consistency in the cuts. It is also important to set up correctly. You have to practice getting your circular saw in the right position, but it is worth it. I constructed a dozen cabinets in my garage using this technique and it was the easiest thing I did all month.
When I read the reviews and tried out the fit of the base, I realized it was sloppily fitted side to side. I corrected this by applying a strip of UHMW slick tape that was approximately 1. 5 inches wide. It is 1/8 of an inch. There is a wide margin along one side of the saw base. Finally, I applied paste wax to both the base and With my new track saw, I can cut material with great accuracy and at a great price. What I would like to see sold is - With this long track saw's reasonable price and handy features, it could be an excellent tool for a long track sawing job.
It's been a while since I bought it Make sure you cut & paste The Rip - You can cut them Assembling the trailer with my SKIL saw was a piece of cake and I have already ripped a 10' 2" x 8" into two 2" x 4"s and some 3/4" plywood for the sides so far. As I said, I will be cutting plywood again today using both the accu-cut and the sacrificial knife This is a cut and I cut him. Both products were easy to assemble and use, and were well-made. recommend watching some of the YouTube videos on these products for some useful additional tips such as cutting plywood over a foam insulation sheet that measures 4' X 8'. Despite its price, this product is worth recommending for occasional home DIYers.
Related Products For Kreg KMA2700 Accu-Cut 48-Inch Guide Track System With KMA2685 Rip-Cut 24-Inch Precision Edge Guide
