Diamond Hole Saw Drill Bit Set 3 Pieces Porcelain Ceramic Glass Tile Pot Drain Fish Tank Holes 1/2 (0.5) 3/4 (0.75) 1 Inch
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Get off to a slow start. You should tilt the drill bit just enough to get a small curve at one spot and then level the drill bit and continue gradually, but not As part of my drilling routine, I use a small amount of water to keep the bit and surface of the object I find this method to be effective.
There are stucco drill bits that do not come with guides or jigs, so I don't know if you can cut holes in stucco.
As long as your drill Chuck isn't too small (most are capable of taking a 1/2" bit), it shouldn't cause any problems. Although the shank sizes are not identical, the largest one
Selected User Reviews For Diamond Hole Saw Drill Bit Set 3 Pieces Porcelain Ceramic Glass Tile Pot Drain Fish Tank Holes 1/2 (0.5) 3/4 (0.75) 1 Inch
My shopping list does not have to be void of cute pots anymore. These have been very helpful for drilling a hole in ceramic pots that don't have drainage holes so I can keep I love the way this set works. The door-stopping cute pots that do not have a hole are no longer an issue for me. It has been a long time since I have drilled pots, but the drill bit has remained intact. In order to prevent soil from falling through, I only use the smallest one and use mesh drywall tape to stop it from falling.
When I first saw the drilling, I thought it was perfect, but as soon as my drill stopped making progress, I realized it had no With just a slight angle to the drill, I was able to pop out the bottom with just a little chip on it. To give you an idea of the size, my granite counter tops are 28 inches high. The thickness of the sheet is 5 mm or 1 1/8 inches. In the cabinet under the hole, I draped a towel and placed a circle of plumbers putty over the hole to hold water around it to keep it cool with periodic draining. As a result, there is no need to keep a constant stream of water.
My granite kitchen counter has a water filter installed, so I used this drill to install it. A nice package of 1" bits with 1/2", 3/4" and 1" bits was included. The 3/4" bit I used is shown. Despite no chipping or other problems, it did a nice job of drilling a hole. I used water (used the sponge to keep it cool and wet for longer). I hardly took a minute to do it (a couple of minutes max). The delivery was completed within the agreed-upon deadline. It has only been used once so I cannot comment on how durable it will be in long term, but if you are doing a small DIY project you can feel confident with this product and quality. I also found similar products on Amazon and other online stores with more bits and a lower price.
I used these to secure a set of outdoor stairs by anchoring bolts into the solid granite. I used a bit extension to enable me to dig a deeper hole than the bit would allow, because the bit only allowed me to drill about an inch deep. (I had to grind down the shaft to fit into the extension. ) In the beginning, I used an empty gallon milk jug with a small hole in the bottom to cool/lubricate the drill bit. However, once the hole was started I could just keep filling the hole (drilled vertically) with Four holes of two inches were drilled with the one-inch bit without issue. It only took a couple minutes to drill each hole (despite having to remove cored rock periodically in order I am very pleased with this.
It is ideal to use this hole saw on an occasional basis. It's doubtful they could stand up to the tests of today I cannot use them for more than an hour a day, but for people doing an occasional tile job they work great. The price is reasonable, but it would be nice to have a small plastic guide that would help get the hole saw started (they have a universal jig for this) but it can be used with a small piece of plywood with an insert that fits similar size holes. When they cut through the glaze, it only takes a few seconds to make a hole in the tile. There is no better method for making a perfect hole and a neater tile job than using a high rotation speed, light pressure, and lots of water.
As I used a battery-powered drill, I drilled a hole through ceramic tile and cement backer board with the 1-inch bit. It took no time at all to cut a clean hole. The bit needs to be placed slower and covered with masking tape to prevent walking off center, but once it begins biting you can add a little water for lubrication, and it will be easy peasy. The bits on this set are not the best made, so if you are a contractor or planning to make a lot of holes with them, I recommend getting a set made by a professional. However, they will serve you fine for a small job around the house and are very reasonably priced.
As for drilling through tile, it takes a little more time than drilling through drywall, but these bits were perfect for the job. This is a highly recommended book.
I did what I was supposed to do. In my case, I was able to drill a fine hole in my 1/2 inch-thick granite deck.
You want to drill directly on granite, not use the painters tape. If the painters tape is used as a gripper, it could lead to the drill bit not being positioned where it should be. Play dough was used to make a dam of water for the drill bit to cool while it was being drilled. I was worried that the smooth surface into the drill would not hold in place, but it worked like a charm. I was patient and kept going till the drill bit worked its way into the granite. This is a 5 star review. can't speak to the reliability or repeated use of this program because I only use it once.
Related Products For Diamond Hole Saw Drill Bit Set 3 Pieces Porcelain Ceramic Glass Tile Pot Drain Fish Tank Holes 1/2 (0.5) 3/4 (0.75) 1 Inch
