Sensky BS010WL DC 12v to 30v Mini Pir Motion Sensor Switch Occupancy Sensor Switch for DIY LED Lighting, Light Sensor, time and Distance Adjustable (with Light Sensor)

An easy way to turn on 2 meters of LED strip as soon as you walk into the door at night. The unobtrusive software is always up to date and working properly. It turns out there is no alternative to adjusting this, but I was able to do it easily It is as simple as pulling out the back of the case with a small flat-head screwdriver There is an immediate visibility and accessibility to a head screwdriver and three blue dials. You can adjust the sensitivity dial to determine how close you have to be to the sensor to trigger it. I set mine to about half way so it wouldn't trigger if someone walked down the hallway just a few feet from the entryway. The way is. By adjusting the delay time dial, you can change how long the light will turn on once triggered. The dial is very sensitive -- a few degrees can change how long it stays on! Using the Light Sensor dial, you can set the threshold for lighting. In other words, it gives a light level to the sensor that determines how it operates In cases where ambient light (the amount of light already present in the room) is below the threshold, then when it senses motion, the sensor will allow itself to be triggered and turn on the lights. The sensor can still turn on if the ambient light is below the threshold, but will not turn on if the lamp is above it. I found this to be an incredibly useful feature, since it gave me the freedom to play around until I found a value that would trigger the sensor around dusk and twilight. For quick access to the adjustment dials, here are some quick tips It is best to set the delay time to its minimum value when you're trying out your settings for the Sensitivity and Light Sensor dials, or else you'll have to wait for the lights to turn off each time you set a new value. If you push the back off of the sensor to get at the dials, be aware that the circuit board is not actually screwed into place inside the housing, so it will fall out if you flip the sensor However, I found this not to be a problem for me, but others may find it disconcerting. Just be mindful of this. Because of how useful and cheap these little sensors seemed to be (and because of how small they were. ordered two of them on my first order and I am They're now installed at both my front and back doors, and I'm thinking of installing one on the internal door of my garage as well. The product is brilliant! I can't say enough good things about it! Remember that the dimmers were never meant to be able to control the lights in an entire room There are only 3 Amps of current this thing can handle, so don't go overboard!.

Sydney Braun

| Jul 29, 2020

It is a sensor that I had previously bought (BS010WL), and it worked fine for me. Using it, I controlled a strip of LED lights. A new purchase of this item was made. Despite the fact that the box shows it as the model number I ordered, the sensor was missing the light control, which means that it was actually model (BS010W) (see attached images). The pros are 1) You can't access the controls unless you open the sensor. 2) It's difficult to take the sensor apart without scratching it. 3) The mounting screws have very small holes. 4) You may get something other than what you ordered. A summary of the latest update is given below. My house has 3 of these working well, but the last one I got does not work at all. There is no way for me to turn off the light regardless of changes I make to the settings. Due to the fact that it has been more than 33 days since I bought it, I am unable to Bringing the total number of starts.

Elian Baird

| Sep 27, 2020

It seems difficult to figure out how to make the proper adjustments? The light will come on when someone walks into a closet and I want it to do so at every step. Considering that my door is open mostly of the time, there is a lot of variation in the amount of light entering my house. There seems to be no way to adjust it so that I notice that it keeps coming in for no reason even when I think I've finally got it.

Judah Hull

| Dec 27, 2020

These are excellent products that were The 110 line voltage motion sensor works much better than a 12v transformer with 110 line voltage. Installing them is a breeze, and adjusting them to suit personal needs is also very simple. They are already fitted with standard male and female plugs. Three were ordered, but there were only two in the package and one inner envelope was empty. Odd! Sensky refunded me the cost of one of these within an hour of my time-wasting call to them and I repurchased it within the week They ordered the item they were missing. Customer service in this case is outstanding, and I would be happy to make an order again from Sensky.

Veda Silva

| Oct 25, 2020

This is what happened after I installed the initial one the computer stayed on all the time. I requested a replacement and the replacement Because it has the same plug ends as our AIBOO under cabinet LED lighting switch, it was very easy to pull out the switch and install this in place of it for our laundry room, so as soon as you walk in these under cabinet lights come on, and turn off after 1 minute. There will be some pictures showing this set up coming soon. We originally planned on using the remote with the cabinet lighting, but since we have similar pendant lights in our kitchen, the remote for either module would turn both sets on, so we removed it and have been using the switch instead, but this is a much better solution than.

Bennett Berg

| Apr 05, 2021

There are plenty of these available and they are There are four little trim pots on the circuit board that you can adjust to control the delay time and sensitivity, if needed. I used this to control two 2-channel audio encoders. To illuminate the interior of my daughters pantry, I installed LED strips that extend 8 feet long. I like the way it works. A grocery store cooler is similar to that. Above the pantry door, I installed this controller. Whenever you reach into the pantry, the lights are turned on. The woman was thrilled with the news. All components of this system were powered by a 12 volt DC wall wart. My entire shopping experience was on Amazon. It's so wonderful to learn something like.

Marlee Decker

| Aug 24, 2020