Leviton ODS10-IDE Decora 120/277V Wall Switch Occupancy Sensor, Black

I bought the device to replace the motion sensor in the water closet because of two reasons. 1). I wanted an ambient light sensor and 2). I wanted a 30 second delay time (instead of a 5-minute delay from the There are no problems with the delay timer, but setting the ambient light sensor is difficult to get it to work at night but not in the daytime. It might be my application that is causing the issue, and I added a star to reflect that. I was able to install and adjust all the settings well but I just couldn't find a setting that allowed the ambient light function to work well either it wouldn't come on at night or it would come on during the day. The adjustment screw only needed to be changed by a few degrees. Even if it isn't worth $30, I probably won't be sending it back and will let it turn on in the daytime and nighttime.

Aleena Mack

| Nov 11, 2020

Is it possible to have a motion sensor that is less feature-rich? I have updated! It is also known as a Fortunately, we have had a occupancy sensor installed in our garage for years, which makes the lights turn on when you arrive home. After longer and longer use, it stopped working, so I scoured the internet for a replacement. NB Please take note of the following I will be reviewing specific features that I use in this product review. There are a lot of Plus, Amazon is giving away free A motion is associated with this. It is a nice touch to have the occupancy sensor work. This timer has an internal relay, so it can handle a lot of load. A neutral wire is not required, just a hot wire and a ground wire We're really happy with how this worked with our fluorescent lights in our garage, now we're using them with LED Advertisements are available There is a voltage range of 120-277V, Advertisements are available The 800W light bulb will last for approximately 15 hours A 120V incandescent light bulb with a current rating of 67A. Advertisements are available I am using a 1200W power supply The voltage is 120V and the current is 10A This is the 2270W series, part number 7271. Luminaires with fluorescent lighting require 10A, 277V. Advertisements are available The 1/4 horsepower motor has a driving force of A 120V power supply is eight amps. Advertisements are available The warranty is for 5 years. The cons are as follows Please note that With a price of $32, this is expensive. The price I paid was 99 when I purchased mine. There is a $10 to $15 difference between colors other than white! How is this possible? It's not true* A time delay of 30 seconds or 10, 20, 30 minutes is allowed, not more! You may not set the time between 30 seconds and 60 seconds Would you mind waiting for a bit? Please note that It is not possible to permanently turn on or off the controlled lights! Starting the timing cycle is as simple as pressing the switch. In the case where the time delay is set to 30 seconds, the computer will remain in the switched state for that length of time. This is true whether the system is in an off state or an In closing, I would like to say the following The reason I purchased this motion switch is that it has a higher power rating since I have so many fluorescent light tubes (now upgraded to LED lights) in my garage. This device has only two major shortcomings low timeout delay and inflexible input configuration The lack of a manual switch for switching the power on and off. A workaround for this is to wire a switch next to the motion sensor, so that I can turn it on/off manually by switching it on/off (see The motion sensor is bridged by the room light switch, so I can use the room light switch to manually operate the lights when the motion sensor is turned off (with the added switch). With this workaround, I am able to work with the old Leviton motion sensor that this redesigned switch does not have. Previously, there was an internal manual switch in the unit I replaced. There was full manual control with that switch. Apparently, in "building a better mousetrap", the off function was removed from this device, as it was an essential part of the device. I'm updating (

. April 9, 2017*This motion detector has been working perfectly for over 6 months now. As long as it is kept within limits. I tested this again today and it is still working great! Having decided to raise my star rating from 2 to 3, I decided to use it for my product reviews.

Ray Higgins

| May 29, 2021

There are plenty of great devices in this category This saves energy to boot. (Also, you will One of these has been located in my basement for five years, and it's consistently operated 300w worth of GU10 bulbs without any problems. With the new one I purchased, I can control 7 Philips 100w equiv LED lights. Three other fixtures have also been without issue due to the bulbs. One thing I do not like about this game is that the tiny shutters that narrow the FOV were not In order to prevent the living room sensor from being triggered while walking into the kitchen, I had to cut and stick a piece of white electrical tape on the right side of the sensor. The rest of the story is this This is a great device. I wish Leviton would make GFCI outlets and occupancy sensors bundled together so I could have one in my bathrooms.

Zaylee Thompson

| Mar 07, 2021

I went to the website and watched the install video and realized the device did not indicate Leviton on it, fired up the google machine and keyed in the numbers found on the device and was routed to a Chinese This is no surprise, as I did not install that one, I went before to the local ACE, got what I needed and installed that one. This note is only being written now that I am cleaning my workbench and I found this device. There is a lot of counterfeit stuff floating around these days, which is nuts.

Kamari Mejia

| Nov 13, 2020

When using an LED fixture with a motion sensor, this is the device you will need to use. Attempted to use 4 other Auto sensors with the LED, but all were ineffective. Even the off position of LED fixtures bleeds out a small amount of current, which is insignificant for an incandescent bulb, but it is much more noticeable for the LED fixture During the day and at night, it stayed on. For an LED fixture, I contacted levington and they recommended this product. There is no problem with it. Wings can also be added to restrict the field of activation, making your application more personalized.

Lina Andrade

| Oct 28, 2020