ELEGRP Occupancy Motion Sensor Light Switch, PIR Infrared Motion Activated Wall Switch, No Neutral Wire, Single Pole for CFL/LED/Incandescent Bulb, Wall Plate Included, UL Listed (1 Pack, Matte Black)

Using the smart switch, you could manually turn it on and off, or you could ask Google home to turn it on for you when you're walking toward the kitchen. With this new system, all I have to do is walk in, and ta-da! If I remember to shut off the light in the kitchen when I'm done, then I'm able to walk out without any thought processes or hesitation. Since I have had other models of motion sensor switches installed in my bathrooms and laundry room, I am totally in love with them. This was super easy to install and only took me about 5 minutes! It looks great in black, too!.

Sylvie Brown

| Aug 02, 2020

At one point, one of our pantry overhead lights was a Lutron Maestro motion switch. A sliding glass door opened into this small room, so the switch was located on the wall a few feet away. During walks past the sliding door, the switch would be triggered if the door was open by 1" or more. There are two sensitivity settings on the Lutron, but the lower one has a pretty broad range from side to side, so I could not get it to ignore a passerby when the door wasn't fully shut. In addition, this ELEGRP switch allows users to adjust the range width, the light time-out, and the There are also 3 small dials to make these adjustments in order to customize them to your personal When set to the lower end of the sensitivity range, it's really good. I will not be able to turn on the light until I open the door and enter the room if the door is left open a few inches. It was exactly what I was hoping.

Averi Wiley

| May 29, 2021

My washer/dryer is in the garage, and when I pull my car in, I hook up my car. You can have your hands free when you are shopping. I found it particularly strange that the faceplate is very difficult to remove if you need to make adjustments. My car gets a lot of attention since I work on it While I was under the car to do an oil change or exhaust repair, I found out that the timer had gone off because I had set it to 30 minutes. I was down there too long, so I was at fault. Next, I walked around the room taking breaks while waving my hand in front of the sensor in an attempt to reset In my experience, it didn't reset since the lights turned off one more time while I was underneath my car. It was most definitely It would be great if there were a way to make the lights stay on when I manually press the switch and if it detects motion put it on a timer.

Misael Fischer

| May 29, 2021

I have no problems installing it. I really like the way it looks. Switches like this one work fine and look very modern. There was a switch in my closet that I used. In contrast to others, this keeps the light on during movement. Others cut the power as soon as you move, and you have to move again before the light returns. It has a time, sensitivity, and mode adjustment label attached to it. A clear set of instructions is included in the packaging. ELEGRP has impressed me and I plan to order from them my next electrical component. There is no doubt that care was taken during.

Augustine Horne

| Jan 10, 2021

When I see a motion sensor, I assume that there is an outdoor spotlight. In addition to this, I purchased some curtains for my new craft room I'm having built by my husband. As I usually enter or exit this room, things are brought in or out by me. love the fact that I can walk into the room with books, or other heavy bulky items, and the lights will just turn on without me having to lift a finger!
This is a brilliant idea. My recommendation for this product is yes, and I will be buying it You could also use something like this I'd like to use this for other rooms as well.

Julien Garner

| Oct 05, 2020

It's amazing how much I love it. I like the way it looks and it works well. The Decor/Decora faceplate is well suited to this piece. In a stuffed box, it is a reasonable size. *Works as described in the documentation. It seems almost as if controls have no paint on them. No reference to the tool used to adjust the three settings is provided in the document (I ended up using a Philips). The only reason I took a star away was because of this. Other than that, this would be a clear 5 star device!

That aside, it works like a charm once you get it configured. This feature is set to only operate for a VERY short period of time when it is turned on. Changing mine from 15 minutes to 30 minutes worked for me.

Nola Watkins

| Aug 23, 2020

As of now, everything seems to be working fine. The unit that I purchased is a replacement for a garage light switch. I've never needed to access the dials for setting light and movement sensitivity again since the controls underneath a panel require removal of the frame, so they are not easily changed. Once I had the settings to what I wanted, it's been unnecessary for me to access them anymore. In peripheral areas, sensitivity is very good, while in straight lines, there are some inconsistencies.

Braelyn Townsend

| Jun 23, 2021

Upstairs, we have a large windowless closet, so this switch was installed there. The computer is set to turn off 30 seconds after a person The program works like a charm. This is a switch I would highly recommend.

Aliza Larson

| Apr 23, 2021