It is also known by the part number 316490000 (AP3963654) as AH1528542, EA1528542, PS1528542, 316490003, and 1197392.
Questions & Answers
What is the model number of Kenmore ?
My research on Repair Clinic revealed that the model number on your stove is the same as the one listed on #316490000 . I hope that helps.
The specific model #fgef3032mfh is not listed. Does this work with that model? We cannot locate our model number (that ends in an h) on either the frigidaire or electrolux websites. ?
As for whether or not you should use the end, if it looks similar it wouldn't hurt to try it if you can't find an exact match, if this is not what you want, you can always return it. Please accept my condolences that I was unable to be more helpful.
Selected User Reviews For 316490000 Oven Probe Replacement
There is a list of models that this particular item fits in the product description
In the case that your number isn't on this list, make sure you This is despite the fact that Taking heed of this advice -- Before placing an order, a team member should pull up the control board and check it. This probe was ordered by my husband (from everything he read, he thought the probe was the problem), and after he replaced the probe, the oven still did In order to fix the problem, we had to buy a new control board.
| Sep 25, 2020
The recipe was baked without a lot of temperature variation for almost 4 months! I just updated I replaced the probe and after 4 months, the oven started acting the same as before
Having found out that this one didn't work very well for a long time, I'm going to find another one. I'm not sure if the original review is still available I bought this probe specifically to replace the probe for my Kenmore oven made by Frigidaire. My wife didn't want to use the oven until we replaced, or fixed, the probe! As low as 25 to 50 degrees below set point was read by the thermometer. By bumping up the oven setting an appropriate amount, after a short amount of time, the thermometer might read between 25 and 50 degrees above the new temperature. My probe reads within the temperature range of the room when I tested it with a multimeter. We decided to replace the probe anyhow, hoping the problem wasn't the control board. We re calibrated the oven and installed the new probe about a week ago and since then we've been able to bake batches of cookies both sequentially and separately with 100% accuracy. We were relieved to not have to purchase a new oven at a considerable cost, since the one we wanted would require switching from electric to LP gas.
| Feb 05, 2021
FGGF3035RFA now displays the correct error code F30
It is hot. It appeared that the temperature probe was the cause of the error. I had previously purchased and installed a probe and it had worked, but now the error has been fixed and the oven is working once As long as you have a square recess screwdriver, you can easily install it. In order to reach my goal, I had only to I. 1. Ensure that the power is turned off* 2. Pull out the oven and turn it off 3. Our 5 screws will allow us to remove the back of the unit*3. Pull one screw to disengage the temperature probe's power supply 4. Invert the voltage to the temperature probe's output. The probe part needs to be replaced 5. You can find videos on YouTube explaining how to put the thing back together. This was a very straightforward process.
Update After more than a year and a half, the project is going well.
| Mar 10, 2021
Has a tendency not to work consistently
It's like a game of roulette with the oven. On some occasions, I have to turn on the broiler for it to start and on other occasions, it starts automatically. It sometimes takes a while for it to heat There are times when I smell an alarming gas smell. There are times when I am pushed into by two small children. I see the other oven there. With a griddle on top of this Kenmore gas range/convection oven, it has a gas range. This is a 790 model.
| Mar 17, 2021
The plan did not succeed
Despite the best efforts, it has failed seven months after launch. It's not going to happen.
It does what it was designed to do
As a result of an error code, I diagnosed the problem with our oven. It was either the temperature probe or the main computer that was malfunctioning, according to the research I conducted. That was the solution to the problem.
| Oct 10, 2020
I would definitely recommend this product
It is a great I was not able to apply it to my situation. Neither the seller nor the buyer is responsible for this There was nothing I could do about it. We've reached the end! (There was nothing wrong with it, by the way).
| Jul 18, 2020
I found this product to be of the highest quality at a competitive price
As a result of the product working perfectly, I did not have to buy a new oven, thus saving me some money. During my research around town, no one was able to match the price Amazon had on this sensor. Four times we have used the oven at different heat levels and the set temperature remains the same. As soon as the unit failed to maintain the set temperature, that was the first sign of trouble. My computer is now running like a brand new one - and I didn't have to pay a professional to diagnose and install it!.
| Jun 19, 2021