3M Safety 142-6100 6000 Series, Small Reusable Half Face Mask Respirator
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you're just looking for CoronaVirus/CoVid protection, please take a moment to read about this product. 19 br>br>Because it was designed for industrial use, such as working with paints, vapors, and dangerous gases, it comes without filters, allowing the user to purchase and replace them as needed. Eg: I could put on a H-protective suit if I'm working with Hydrogen Fluoride. In contrast, if I were working with ammonia or chlorine gases, I could use the appropriate gas filter. br>br>This isn't just for CoVid-only users. 19 However, with the right filters, it can outperform N- 95 masks. br>br>This is due to the fact that some cartridges are only for gas (and thus useless against CoVid). Other cartridges, however, offer a gas_particulate filter in addition to the 19). These combo cartridges are effective against CoVid-type viruses. As they provide P-, they are ranked number 19 on the list. The level of protection is 100, which is close to the 99th percentile. 97% of the N-th of the N-th of 95% protection is all there is. The pink "3M 60926 Multi Gas, Vapor Cartridge, Filter, P100 (2 Pack)" is an excellent example because it includes a P100 filter. br>br>Circular P100 or P95 filters, such as the "3 Advanced Particulate 2291 Filter, P100," are also useful. br>br>The trapezium-shaped replacement filters, such as the "3M 5p71 P95 Particulate Filter" or similar, are a third option. Please keep in mind that these are simply cotton pads that require a case or adapter to fit into the respirator. If at all possible, br>br> If you're a beginner, stick to 3M cartridges and filters; other brands might not fit.
If you're just looking for CoronaVirus/CoVid protection, please take a moment to read about this product. 19 br>br>Because it was designed for industrial use, such as working with paints, vapors, and dangerous gases, it comes without filters, allowing the user to purchase and replace them as needed. Eg: I could put on a H-protective suit if I'm working with Hydrogen Fluoride. In contrast, if I were working with ammonia or chlorine gases, I could use the appropriate gas filter. br>br>This isn't just for CoVid-only users. 19 However, with the right filters, it can outperform N- 95 masks. br>br>This is due to the fact that some cartridges are only for gas (and thus useless against CoVid). Other cartridges, however, offer a gas_particulate filter in addition to the 19). These combo cartridges are effective against CoVid-type viruses. As they provide P-, they are ranked number 19 on the list. The level of protection is 100, which is close to the 99th percentile. 97% of the N-th of the N-th of 95% protection is all there is. The pink "3M 60926 Multi Gas, Vapor Cartridge, Filter, P100 (2 Pack)" is an excellent example because it includes a P100 filter. br>br>Circular P100 or P95 filters, such as the "3 Advanced Particulate 2291 Filter, P100," are also useful. br>br>The trapezium-shaped replacement filters, such as the "3M 5p71 P95 Particulate Filter" or similar, are a third option. Please keep in mind that these are simply cotton pads that require a case or adapter to fit into the respirator. If at all possible, br>br> If you're a beginner, stick to 3M cartridges and filters; other brands might not fit.
Yes, if it works for epoxy, it should work for glue as well. As long as you've got the right filters in place. It's okay if they're a gaudy pink.
I have one that I use to airbrush my craft items, but I've never used it on fir smoke. I can tell you that I had to order a small size, which I had tried before with another company. This mask is extremely comfortable to wear, has a good fit, and is simple to take off. Because I have arthritis in my hands, the neck straps can be difficult to connect at times. I'm very pleased with this mask in general.
Selected User Reviews For 3M Safety 142-6100 6000 Series, Small Reusable Half Face Mask Respirator
PS: This is merely a respirator, and you must purchase the appropriate filters to use it; otherwise, it will be useless. br>br>I purchased this 3M 6100 half-face respirator (SMALL) to protect myself from CoVid. Aabaco Environmental is a 19-year-old company based in Aabaco, Brazil Working with them is a pleasure. I had never used such respirators before, and the sellers, Dan and John, were gracious enough to call me and explain the differences in size, fit, and filter cartridges. br>br>Within 6 days, I had a zip-lock bag. 3M packaged respirator, sealed in 3M packaging with the words "imported from Canada" written on it. It's pleasantly light and comfortable. br>br> All of the padding that comes into contact with the face is silicone rubber, which provides both comfort and a perfect fit. Fit: br>br>Size: br>br>Size: br>br>Size My wife, who is 5'1" and 110 pounds, found the Model 6100 small to be the perfect fit. br>br>I tested the fit by blocking the intake valve and finding that I couldn't breathe in; similarly, I couldn't feel any air slipping out from the sides when I blocked the exhaust valve. br>br>A few words on Covid- Coronavirus No. 19: Coronavirus No. 19: Coronavirus No. 19: Coronavirus No br>br>This respirator isn't made for CoVid-specific use. 19; however, with the proper filters, it can be better than N- 95 masks. However, because there is a bewildering array of filters and cartridges, new users should familiarize themselves with them. I recommend that you double-check yourself- Videos about the 3M 6100 respirator can be found on YouTube (just type in "3M 6100 respirator" into the search box). br>br>Filter: br>br>Filter: br>br>Filter: br>I had to purchase the "3M 60926 Multi Gas, Vapor Cartridge, Filter, P100 (2 Pack)" filter cartridge separately. This is a combination of Gas P100 particulates. It doesn't matter what kind of gas CoVid filters as long as it has a P100 filter with a 99. 9% efficiency. 97% protection against particulates of sizes and shapes and shapes and shapes and shapes and% to 0. 3 micron. Even if CoronaVirus gets airborne, the typical cough/sneeze droplets are about 5 microns in size, so this should be enough protection. borne (which refers to a fine mist with a particle size of less than 0. 25 microns)br>br>With a P100 filter, this is actually better than N-type. 95 masks (which only provide 95% filtration and can be found nowhere%) Simply make sure the respirator is the right size for your face (3 models of respirators, 6100/6200/6300, which are S/M/L respectively)br>br>The filters and cartridges usually say "compatible with 6000 series, which means any of 6100/6200/6300). br>br> br>br>When choosing a filter, keep in mind that some are "gas-free. " only" cartridges, which offer no protection against particulates, making them ineffective against CoronaVirus/CoVid-related infections. If you don't like the pink color, you can use the circular 3M 2297 style filters; just make sure you get a P95 or P100 level of protection. The circular filters connect directly to the respirator without the need for any additional adapters or connectors; look for the word "bayonet" in the filter description and make sure you get 3M-branded filters. The circular filters have the advantage of being lighter, but they are also more exposed, whereas 60926 style combo cartridges protect the actual filter inside a plastic box. br>br>Conclusion: For CoVid- Surgical masks, on the other hand, only offer a 20-percent protection. 30% filtration efficiency and are meant to protect others from your cough/sneezes and are meant to protect others from your cough/sneezes and are meant to protect others If you need to defend yourself, either this or N-95 will suffice. 95 masks. br>br>Hint: if you're looking for a unique way to express yourself, try using the words "innov Keep the respirator and filter in a ziplock or other seal when not in use to extend the filter's life.
Have you ever wondered how it feels to take a deep, cleansing breath of fresh, poisonous gas? Thanks to the good seal of the 3m half-pipe, you won't have to. a mask for the face If you don't use some 3m organic vapor cartridges with this bad boy, it won't do much to protect your sweet little lungs. The carriages with the pink particulate filters are the best, but the carriages on their own will suffice. br>br>Combine with impact-resistant goggles and a helmet (and, if you don't want to ruin your skin and hair, a lycra balaclava) and you'll be ready to face down your oppressors head-on. on, and on, and on, and on, and on, and on, and on br>br>Please keep in mind that this is a small size; if you aren't a petite lady/person like me, this may not be enough to keep you safe. br>br>My friends, stand firm.
Because of the exhalation valve, I was able to reach the age of 19. I live in Northern California and suffer from asthma. This is what I'm wearing. Indoors, use a face mask with particulate filters. When wildfire smoke is present (as it is today, August 19, 2020). If you're going to Covid, this is the outfit to wear. You must wear a fabric Covid-style shirt if you are under the age of 19. 19 Over the respirator, put on a mask. Why? Because the respirator has an exhalation valve in the middle that allows you to exhale, but that valve has no filter. It's possible that you're suffering from Covid. 19 but be asymptomatic (i. e. , have no symptoms and thus are unaware that you have Covid- 19), after which you will disseminate the Covid- 19 by way of the exhalation valve. As a result, make sure you're dressed in some sort of Covid-related attire. When you're out in public, wear a 19 fabric mask instead of a 3M respirator.
It must have arrived, but it appears that it did not! br>It was never mentioned in the description that the filters were not included, and that I would have to wait until September to order one, or pay twice as much and get it in 20 days.
Several nurses I know, including myself, use these to care for congenital heart disease patients. This is extremely relaxing. It is simple to breathe. No, it does not include filters; you will need to purchase them separately. It works with every filter I've tried so far. Yes, it was tried on. It's perfect, and it's a great price. I'd definitely recommend it.
At the very least, one filter should be included.
The fumes are no longer detectable! The mask, on the other hand, has a peculiar odor (plastic?). That's to be expected, I suppose.
Related Products For 3M Safety 142-6100 6000 Series, Small Reusable Half Face Mask Respirator
