Nigo Industrial Co. 3-Way Tee Brass Hose Fitting, 1/2" x 1/2" x 1/2" ID Hose Barb Pipe Fitting (Pack of 1)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
A low level of toxic chemicals is contained in them A lead should not exceed 2 in number. Five percent.
You are just looking at how to measure it, in my opinion. On my fuel hoses, I used the 5/16-inch and it worked great.
You should order food grade while asking for what you need.
These particular ones are meant to be used with 5/16" ID hoses.
Selected User Reviews For Nigo Industrial Co. 3-Way Tee Brass Hose Fitting, 1/2" x 1/2" x 1/2" ID Hose Barb Pipe Fitting (Pack of 1)
There is one issue with the 2013-2014 It is a minor problem but a real pain to fix on the 2019 Subaru. There is a hose connected to the front wiper. A little plastic Y pieces up into many small pieces, polluting the lines and nozzels and causing the system to not function. The cowel must be removed in order to get to the nozzels and all the lines you need to pick out the little pieces. There are a lot of headaches associated with it. The only difficulty is that it is Replaced mine with a T made of brass in 3/16 inch. You won't need to worry about the sun or heat damaging it. For the $5 part, which was just another plastic Y, the dealer told me it would cost $400 to do the job. I am amazed. I only spent $10 and 1 hour of time on this even though I had to purchase three of them. The Brass T means I won't have to do the job ever again despite the fact that I know how to do it in much less time now. The local home hardware store does not carry them, and I found one for the same price at my local plumbing supply shop.
This is the 1/8" x 1/8" x 1/8" Barb I bought. I do not believe it is. This is a 1/8 inch x 1/8 inch x 1/8 inch product. There is no way to use it with 1/8" black PVC tubing, such as that used on swamp coolers and found in your local hardware store, as it is METRIC and DOES NOT FIT. The precise wording is as follows *The barb diameter of a standard 1/8" is as follows There are two types of barbs. A tee barb is 213" (close to 1/4")* and a tee barb The 158" (4mm) tube can thus "almost" fall out by gravity alone and can certainly fall out of standard 1/8" tubes with a shake. To put it even more simply, it will not work. In order to sell it as 1/8" x 1/8" x 1/8" Barb, it must be liar. No matter how loose your fit, you need a This length is to be sold as a 1/8" x 1/8" x 1/8" barb. It is essential that you check the ID of the hose or tube you are going to use these with (20,000ths of a percentage). In this case, it would be 1/8 inch The 125") will be incompatible. Their only advantage is that they are shiny and there are only three in each.
I used one of them to make a portable In order to make this work properly, I attached fuel hoses to all three sides and valves to the other end of the hoses. The pack seemed to have three or five candles in it. The point is that the product is great and well worth the price. You can buy different amounts, but the product is worth the money in my opinion.
The photos are excellent. I enjoy them very much. The Clippard retainer is now only available in stainless steel, and there is only one barb for the Brass retainer. Therefore, Clippard's retainer does not hold that well. When using Tygothane, Parker Hannifin's are hard to use since they are thick and hard to handle. hoses have three barbs, and the Clippard retainers help hold the hoses in place. We are using over 100 PSI to run this system with Tygothane, we are running at less than 50 PSI. As a result of the price, I gave it 4 stars. I needed several packages for my project, and I found that they added up quickly. It would be best for the vendor to offer packages with ten parts in each, rather than seven.
I received 2 out of 3 shirts in the two packages I got with pinholes in the casting on the bottoms. There is no obvious leak, but it does leak. There's a simple fix, but it shouldn't be necessary. Just add a little bit of JB weld. I think these are going to be great little items once the casing is fixed.
It was a good product. I found it to be a very strong candidate. It was a good decision to use it.
I was totally unaware of the restocking fee of approximately 25%. It would have been better for me to have kept the items if I knew it.
The machined finish is good. The metal is of good quality.