RiverRidge Somerset Two-Door, Gray Wall Cabinet

In normal circumstances, I wouldn't have taken the time to review such a product. It was my expectation that I would get a refund, but I was so surprised by what I got that it was justified. In the case of a $60 bathroom cabinet, I didn't have high expectations. It turned out to be a badly constructed particle board cabinet that I had expected would be difficult to put together due to poor However, I don't really care because it's for the half bath attached to my home office that no one else uses and nobody sees, so what is the big deal? As a result, I was surprised to receive an extremely well packaged product which had no damage whatsoever. As part of the shipping process, the parts were carefully arranged in a box to prevent damage during There was a label attached to each piece that was easy to remove. Almost every item of hardware came in a ziplock bag with a label on it. It was easy to follow the instructions because they were in English. Moreover, it came with a wall pattern made of heavy paper, so drilling the holes in the right places was Although it is still low-grade particle board on the inside, and wouldn't withstand much abuse, the coating has enough durability that it looks decent and won't chip or dent over time, and it won't dent or scratch when used normally. In total, I did it in about 15 minutes, assembling, hanging, and unboxing. The fact that I would not think twice about buying another one if I needed it would make me buy one. The overall value of this one is good.

Donovan Cooper

| Aug 16, 2020

As long as you read the directions carefully, the assembly was straightforward. Taking short breaks, I was able to accomplish this task in about an hour. I appreciate the fact that all of the hardware and the parts are labeled. I thought it was very nice. I would like to remind you that this cabinet weighs It comes with two wood screws and mollys so you can attach it It has nothing to do with the pre-drilled holes, I drilled my own holes 16" apart There are screw openings drilled in the holes. For the cabinet to be screwed into the studs, I used 2 1/2" wood screws The wall is so amazing!.

Lochlan Rios

| Jun 17, 2021

My favorite part about the design is the lightweight material and the way it looks. One of the problems I had was that a couple of the holes for the hinges on the doors seemed to be wrong one side never tightened fully, and the other side opened up and wouldn't allow me to close the door * I left one of the screws out on one side of the door since it does not affect the door, I did not worry about it. The only problem I had with this product was very small, and I am generally very satisfied with the product!.

Noah Woodard

| Apr 17, 2021

My small bathroom will look great with this piece. was well written with clear directions. There were pictures as well. I took about 45 minutes to assemble and hang the picture. I did find one minor bubble in the finish during assembly (I was interrupted during the process), but the bubble angled to the inside, so in the end it's not a problem. While most of the piece is made from particleboard or manufactured wood, it remains a solid piece of furniture. I recommend its use.

Nathalia Gomez

| Apr 08, 2021

I was primarily concerned about the overall weight, the height of the shelf spacing, and the overall appearance of the medicine cabinet. My bathroom is a perfect fit for this cabinet.

Pros of
- I am familiar with magnetic doors - *Utilizes adjustable shelves to meet your needs - It is easy to clean - The anchors in dry wall are strong and stable* - Quite a lot of space to play with*Con's*- It takes forever for the assembly to take place
There are times when the doors can end up being slightly crooked by just a hair- It is very important to close the doors gently, otherwise they will not stay closed.

Giovanni RAHMAN

| Jan 19, 2021

It is made of poor quality materials. My first one broke in half using a manual screwdriver. I am a petite 54 year old woman who has moderate hand strength. Their packages did not contain The company needed to order another one for me. The rest of the cabinet is now assembled, with the exception of the last lock screw. It is smaller than the standard size. We went to hardware stores before ordering replacement from company. I assembled the rest of the cabinet on my own, and I waited for the last lock screw to arrive.

Milo Patton

| Oct 05, 2020

I purchased this rather than a $300 model. The cabinet is a $1. 00 version from Menards, but the assembly has been problematic. Until I reached the shelf, everything seemed to be going smoothly. As a result, the holes were off center and the cam screws did As a result, I used my drill to get it to A cam screw was shorted to me as well. There are a few things I need to fix with the doors but I think I'll be able to. There were some pre-election events In the case of the dowels, the drilled holes were too deep, which prevented them from catching. I like it as a cabinet overall. Assuming the preconditions have been met In a perfect world, drilled holes would be properly aligned, allowing assembly to.

Grant WHITEHOUSE

| Jul 30, 2020

My cabinet assembly went together well, but I noticed that some of the predrilled holes were missing, as well as some others. I tried to close the drawers after completing the project and found that they did not line up correctly to allow them to close, and the hinges could not be adjusted to eliminate Re-installed and removed closed doors and hinges in order to make sure they were A plane cannot be used to plane doors since they are made of fiber. I'm not sure if the cabinet is useful unless the doors are removed and the doors left open on the other hand, having doors was one of the main reasons we bought. I called customer service and got a recording saying I would receive a call back in one to three We would rather not mount on the wall if there is no way to rectify the problem.

Oakleigh Mayo

| Dec 29, 2020