Kohler K-Cb-Clc2526Fs Frameless 25 Inch X 26 Inch Aluminum Bathroom Medicine Cabinet; ; Recess Or Surface Mount

The cabinet I purchased and another of a very similar brand and model, as well as a cabinet from Pegasus, will be installed in two separate As far as I could tell, this Kohler cabinet was the only one I could find in the 26 X 25 size for a reasonable price. I surface-mounted the cabinet myself. Both cabinets are able to be mounted. There are several things about this cabinet that make it less appealing than the Pegasus one Please note *br*br*- A further reviewer listed the cabinet as having a 1-out of 5 stars This product seems cheap because it has a gap of 1 inch on each side where you can see the plastic. Please note
There are not enough mirrors to cover the entire inside of the doors, which makes it look less expensive. Please note
Pegasus cabinet offers more shelves with a vertical divider, making it a better choice for better organization of your things than this cabinet, which has two shelves that extend across the whole inside. Please note
As you can see, this cabinet has no soft-close drawers There are no hinges on the Pegasus cabinet, but there are on the Pegasus cabinet. Please note
As opposed to the Pegasus cabinet, this one was a bit more difficult to install. The Pegasus cabinet I bought is the wrong size, and I wish I had just bought another instead. The one I recommend is not worth the time.

Elsa Page

| Jun 03, 2021

It is a good product, but there is a flaw the way in which the bar is mounted. A very small lip protrudes from the aluminum bar that is mounted on the wall. This lip fits into one of the grooves The following two tips will help you make sure the bar is mounted exactly in the center of the location where it will be mounted. If you want to tilt the cabinet left/right very much, you won't be able to do it very easily It is restricted in the amount of movement you can make by an assembly screw. Check to see if the bar is in the groove carefully. There is no way to tell for sure, and it doesn't appear just by accident. The problem will not be with you if it doesn't look like it fits into the groove correctly. Put an end to your attempts The only thing you'll achieve is to gouge up your wall over and over again. Basically, the spacing is off and there is too much space In contrast, if you add a washer behind the bar, over the mounting screw, the bar now sticks out to the extent that you can hang it on the Apparently the cabinet fell off, based on some reviews I read. In all likelihood, the installer did not observe closely enough whether the bar was in the recess before he or she installed it. There will be no lip, so the cabinet will rest on the bottom, and if so, there is the potential for a bump to cause it to fall. In the same manner as a brand (Fresca), the construction is exactly the same. It is the same if it looks the In the other bathroom, we installed a Fresca 30 by 36. They had bars on top and bottom. That was the worst part. I honestly find it a lot easier to align two bars on this size / brand, at least as long as you have the top mounting clips. I find this a bit irritating It took several attempts to remove the glue left behind by the film protecting the mirrors, and since Windex shouldn't be used on mirrors, it was difficult to clean that residue with One more problem with the design The clips on which the shelves are attached. Having to rotate them in is very difficult, as they are a tight fit. This is no problem for the one nearer the opening, but the hole at the back is much too close to the back for a good "giggle in". My weakest hands couldn't do the task for me, so I hired stronger ones. The shelves fit snuggly in the cabinet There's no question that earthquakes are good for those who live in earthquake zones. It's unlikely that these shelves will vibrate out after they are pushed in. There's nothing wrong with it, and I'll probably forget that what should have been a thirty-minute trip took me three hours. An installation that took a minute became a two-hour process.

Ismael METCALFE

| Nov 30, 2020

The plastic edges don't detract from the overall pricing. It is a good value for the price. I have updated The plastic film on the exterior of the doors on the front of the door had not yet been removed when I reviewed the doors, but I noticed edge wear underneath when I removed it. Two areas are visible one of which is in the center where the two Having sat in my house a few weeks before installation, I will need to contact Koehler to find out how it can be fixed. Though I'm still happy with how it looks, of course you don't remove the scratch film before installing it. - - - It was important to me to find an economical solution It was a metal framed cabinet with plastic edges that lasts. I had heard about them in other reviews so I figured they were being discontinued because it is at a great discount. I not only could deal with the plastic for the price, but it also looks great from outside the room. It seemed like a safe bet to buy from Kohler, a reliable brand. My disappointment is not as big as I had expected it to be. There was no damage to the packages and they were well packaged. On the corner of the cabinet there are plastic bumpers, and the entire unit is made of foam. In order to prevent scratches on the glass, it is completely covered with cling film. As a result of this, we have added the following A new wall installing in place of an old tri-*span_end> Organize medicine cabinets by folding them. It came with a metal vent pipe behind it, so we had to bump out the cabinet by half an inch by building a small frame of wood around it. A fully recessed design would have been even more appealing. found it difficult to set up the shelf pegs as well, but they do appear to be very stable once the shelves are mounted. It would be better to have this if my bathroom has no windows because it's not particle board.

Alivia Browning

| Oct 29, 2020

It is possible to see plastic on the sides of the apparatus because there is a 1-inch gap. As a result of the mirrored side I assumed the entire side would be mirrored. If I had known we would not have purchased The entire side of the page needs to be updated.

Kamari Webster

| Oct 03, 2020

With Kohler quality, there really isn't anything to complain about. The installation of this vanity mirror wasn't easy because you only had an eighth of an inch available to rest the edge of the bottom bracket on each side. It's 25 inches wide, so you only needed 20 inches at most for the bracket, but they pushed it to very little margin on each side. I wasn't a huge fan of the two clips at the top that held the vanity in place, but it was still functional.

Amoura Hoover

| Dec 11, 2020

With your purchase, you will receive There is only one metal strip - you screw it to the wall and position it. This small bar needs to be in the right place for the mirror to sit, and you need to drill two more screws to hold it. Since the mirror is heavy and solid, you will need two people for the mounting process. Moreover, the first delivery of ours was broken, and we were so easy to return it! My promise (signing) is to return the broken sample within 30 days was the reason I ordered a new one. Despite sending out the old delivery first, the new delivery was already here.

Allen STOREY

| Mar 10, 2021