Moen DN7015 Home Care 23.25-Inch Toilet Safety Bar Rails, Glacier
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It is probably not going to fit on the MOEN DN7016. It is designed to fit on toilet seats. is only attached to the back by two screws, which you can see in the photograph. The MOEN DN7016 has a wide and broad appearance.
My name is John, and I would like to thank you for your interest in our There are no corners on the Moen DN7015 Home Care Toilet Safety Rails front bar. To install and adjust the safety rails, manually remove your existing toilet seat, install the rails, and adjust the bar so the front bar is at least 1" from the front of the bowl. When finished, install the toilet seat again. We are always available on 800-869-8283 for any additional questions you may have 289 to 301 You can reach us between 8 a.m. and 5 p.m. The start time was 00 a.m. There will be a live broadcast at 600 p.m. The time zone in Eastern Time Zone is GMT-500.
What do the two tabs in the back mean? You will need to use those two bolts you already have. In this case, the seat is positioned on top. Given that I have been asked about this one, I assume this is the same product that we bought. This is a good size for a In an elongated model, the front bar has two rows of bars The front of the bowl is 3 inches away from the rim.
My knowledge is limited because I have not used this product with an auto close feature toilet seat, but considering how it attaches, I would say no. If my logic is correct, I am assuming that your toilet seat's hinges are what allow it to close automatically. As this product does not affect your toilet seat hinges, it is positioned under the toilet seat and secured with screws through the holes in your toilet seat and the mounting holes in the toilet. In summary, I'm sure you will have no problems with your current seat in conjunction with this product. Best of
Selected User Reviews For Moen DN7015 Home Care 23.25-Inch Toilet Safety Bar Rails, Glacier
Because reviews state that it fits regular and most elongated toilets, I bought it. It will NOT fit if your tank is very wide or fat, leaving little room between the tank and the seat. There is only one and a half-inch gap between the tank and toilet screw hole. Please see the photo of my toilet attached. In this case, the screws cannot pass through the hole in the toilet seat or the hole in the Safety rails. The toilet seat would work if we did not attach it, but that would be dangerous at the bottom. In this instance, if your tank surface is narrow and there is more than 3" between it and the screw hole in the seat cover, it will likely.
My name is Heather, and I'm a middle school student Despite my age, I was able to put this item together and install it without any problems. straightforward and simple to do. Make sure that the screws are nice and tight and you will have a very secure installation. There is no need for anything more than a pair of pliers and a screwdriver. I found this product to be very convenient, by far the best price for the type of item I wanted.
Having no legs attached to the toilet seat fittings appealed to me because it was clean and simple. I figured I would try it for two months, but the bar on the front of the toilet began to rust after just a few weeks, making a mess of the front, rim and A neurological condition causes me to have muscle spasms, making it difficult for me to walk or keep my balance. I'm 5'5" and 130 pounds. When I put my weight on one of the bars, the unit began to shift and the toilet seat began to move Replace me with someone who can do this.
The best so far has been this hand rail accessory. I've tried a few others, but this one seems to perform It is easy to install, and the part under the toilet seat is covered in plastic to prevent rust. I prefer this design over the one with legs, as the arm rests are quite low for shorter people, and there are no legs down to the floor that a person could trip over. As well as making cleaning easier, no legs make it easier to maintain As a downside, the rubber gripper ought to be added to the point where it attaches to the toilet to prevent the handle from slipping While the slide isn't bad, it can startle a person if they aren't aware that there may be a slight shift in their But not so much shift that it would pose a threat. Other than that, solid. My recommendation for this product is that others should buy it as well.
In the past year, I developed severe joint pain in both knees. I am 5'11" tall, with a 34" inseam. Aside from exercising and using leg strengthening equipment at the gym, I've also done a lot of physical therapy. The difference between a low chair and a low commode is that I can now get out of a chair that is low. We have risers and a large handle unit at home, and the toilet in my bathroom is a comfort height, so I can easily get up off it without any problems. However, the toilet in my guest bath is old and low in height. In addition, I plan to travel outside The look of this product led me to think it would be something I could pack in my suitcase and use during my stay in hotels. Today is the day I got it. It was possible to flip the rear bar connectors up to the right angle as long as the bars were fastened to the engine. It is also possible to remove them completely. Cross bars at the front of the vehicle are You are going to feel the shock of your weight as you lift it, so practice with it while you're loose in the back. It will work beautifully! It stays securely on the commode even when I get up. I have an old round commode with a bar across the front porcelain that sits securely with the whole thing round. The whole set fits in a 26" suitcase completely assembled, so please do not bring a screwdriver. I am very happy with it!.
I had to buy a new toilet seat after the screws on the bottom bar prevented the toilet seat from fitting. The work should have taken 5 minutes, but it took me 4 hours. Sadly, the new seat did not fit as well, so I had to send it back. The only way I could get the seat bolted down was to cut off part of the hinges with a miter saw. There might have been a reason why it wouldn't fit because it's an older toilet. Additionally, a space has been designed into the tank's lid for it to fit. I would make sure that the toilet seat hinges are always at least one inch away from your toilet tank (front of the tank), thereby reducing the space between the hinges and the front of the placing the screws in that location because they're supposed to hide them, but when you're putting toilet rails on a toilet, does it really matter that two screws are hidden? Moreover, since I had to cut off a portion of the hinges, the caps don't fit, so it's now possible to see the screws. However, other than that, the rails are well made and adequate for the There is so much more appeal to the white rails in the bathroom than the silver ones with legs.
It has been only a few days since I received it, but so far I have had no problems. The installation was easy, but I had to buy another toilet seat because mine didn't close unless pushed down, but it wasn't a huge problem. The process of removing and replacing took about ten minutes. As nice as safety bars can look, it is at just the right height for assisting, it doesn't overwhelm the room and it can be easily cleaned. It has been a great day. I think this is the best one I've found. A second one will be ordered for the.
Several years have passed since we used this item. In each bathroom, we have one. It is difficult for us to steady ourselves with our knees because our knees hurt. A 300-pound load is supported by it. It fits perfectly on our standard toliet. This is also what we have always purchased from Lowes, whose price is twice the price on The only negative is that areas where the seat and the bar below the seat are attached to the toilet There is a filthy smell coming from it. The only thing I did not like about the book is the poor quality of the pictures.