Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Cast or forged aluminum are not supposed to be heavy duty in description! They break if that much pressure is put on the nut on top. I have tried two of them. However, you will have to remove the filter cover in order to do so. Have a good time digging! The metal one that I ordered is on its way now and I will see if it's Thank you! I hope this was helpful to
I have no doubt that this product will fit just perfectly on the Hyundai Santa Fe
I am pretty sure that it works on all Toyota models
While I don't know if it will work on your car, I do know you will not be able to return it to the It is non-returnable, so do not buy it.
Selected User Reviews For Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing
A new wrench was needed to finish my project, so I had to stop by Auto Zone. I only had to pay $9 for the wrench at Auto Zone. I bought a 100 percent money-back guarantee one during the holidays for 99, and it worked awesome. I want to return this one, but there are no options for contacting the seller about a refund or returning it. This leaves me very.
Purchases should not be made. During my time at work, I used it for almost a There are slots that require you to position the tool in just one position, and that is a bit annoying. This is a concern, but it's not too serious. A tight filter will snap the fins off the housing, causing damage like the one shown in the image, which may result in a hole or crack in your filter housing. There is no big deal about the filter housing being free for the customer. It happened only once a week for a while. Also, the tool will break since they did not make it out of metal, and it is made from a soft material that feels like cement. As shown in the other picture, this broke the tool on a tight filter. There is no fitment for this tool on the prius, corolla, or any side mounted filter housing using an If you don't have fin slots on the board, and it is a solid construction, then do not waste your time searching for one.
It has been said elsewhere that you should not remove your filter with a 3/8" socket driver. To loosen the filter, I used a bigger crescent wrench because I didn't have a 27mm socket. As soon as I had the filter free, I used my 3/8" socket to finish removing it. In addition, I used a 3/8" socket to install the new filter, because you only need to snug the filter snugly, and not too tightly. This will be an easy task if you have a socket, and your filter wrench will not break unless you really crank it all the way, which you shouldn't do when installing an I am very pleased with the product and the delivery was fast.
This was used to change the oil in my Lexus NX 200T. By the number of 1 star reviews and the photos of broken housings and of the part itself, I was a bit concerned. I'll start off by saying this There is a great deal of room for error in the trimming of the fins and the housing fits very snugly. The first time you press it on make sure it's aligned first, because it's quite difficult to remove. I was trying to use a ratchet with a 3/8" drive and a 10" length until I obtained an error code. It did not budge even when I applied considerable force. As a result of all the broken parts, I switched to the 26mm socket drive. However, the 26mm socket would not The walls are not well toleranced or maybe the paint finish makes them thicker, but I was unable to get the 26mm in place without the aid of As long as I use a 27mm socket, I'm good. I used a 14" wrench for the 27mm socket, and it wouldn't turn steady when I applied force. Since I did not want to break the tool, I used a 30" 1/2" drive breaker bar and gently applied steady pressure to make it turn. I broke it loose with a 3/8" drive, once it was loose, and quickly removed it using that. This is a 4 star product since the tolerances aren't that high I couldn't fit the drive end into the 26mm socket since the filter housing was so tight on it. It was hard to treat it gently because I was nervous it would break. You can get some higher quality downloads for a few more dollars, but I'm probably not going to return it.
An oil filter wrench of this type is heavy duty. I dropped it a few times and it held up well. It was so smooth that the paint did not In my 2015 Toyota Sienna (3, I changed the oil. This is a $5L) and a The filter achieved both of these goals. If the nub is in the center a 3/8 wrench can be used, or a 1 1/16" socket can be used on the outside A great alternative to more expensive products - I recommend this one It can't be worth it to pay the extra costs.
Apparently Jiffy-O doesn't like it when it is pushed. The cap on the oil filter is really tightened up by the lube. It fit perfectly on the cap, and I started to turn it, but the wrench came apart before I could move the cap. Take a look at the By the time it went bad, the drive socket had already started deforming it. I would joke that China makes steel as well as anyone, but in reality they do make steel with fine quality The material is made of pressed metal powder, which is not capable of sustaining any kind of strain under normal usage. This wrench is made from some kind of steel powder that looks like an inappropriate material to use in a tool that only is designed to be used infrequently. The oil filter cap works great so long as it isn't on that tight, but you might want to spend a little more if you want.
In the end, the seller responded quickly and delivered the tool the next day early in the morning (Sunday) for We used this tool to remove the cartridge filter housing from a 2011 Lexus RX350 at a 99 next day delivery increase on Prime. My other three wrenches failed catastrophically, one of them utterly. Our car has been new since new, but this was the first time I decided to change the oil myself since the warranty is no longer in place. My breaker bar handle had to be slipped over an extra length of pipe in order to gain enough leverage to break the seal on the filter. The perfect translation.
Initially, I attempted to use a regular 3/8" wrench with it, but was forced to use a breaker bar due to the tight fit of the filter. The product has so far held up to the usage and has not shown any signs of wear. I like the hefty feel and weight of the plastic. It could last for a long time. It looks durable and heavy. A rugged appearance. As far as the fit on the oil filter housing is concerned, it's snug and secure. However, I didn't encounter any issues removing it once I took it off, which tells me it's.