Moen 4792, válvula rugosa de tubo romano oxidado (bronce a bronce) de 1/2 pulgada con ajuste, 4792
Score By Feature
OveReview Final Score
Product Description
Selected User Reviews For Moen 4792, válvula rugosa de tubo romano oxidado (bronce a bronce) de 1/2 pulgada con ajuste, 4792
I don't like the way it looks. I found that it worked well for me. There were other reviewers who noticed that the item had been Compared to the way the valve looked in my case, many lower parts of the valve looked like they had sloppy soldering jobs. It may be a used valve, but not one I know of. It does not have a pristine appearance though, whatever process they use to make it. My initial concerns were unfounded, but the pre-tests were good It did not leak at all from the soldered joints.
As well, be aware of the fact that the aggressive clamping system is not included with this particular valve. Also, none of those systems are shown on that image. You know what you're getting when you see the results. Each valve body is assembled with two nuts and a washer. I built a 2x6 deck based on the valves, which hold them very well. At least one other reviewer pointed out that the tubing was not aligned with the body of the valve. According to which tube it was, it could either be straight or perpendicular. It was difficult to align the tubes perfectly on my valve, but they were very close. However, I did not encounter any problems due to this.
Another thing I noticed is that this valve appears to be made of There are no copper pipes. There were no leaks. The solder held up fine. I had some concerns about holding up, but it held up fine. A lead-free solder and flux kit I bought from Home Depot and Map gas worked fine for me. Keep in mind that the cartridges cannot be removed from this valve when soldering it. do not apply too much heat to the valve and immediately cool it down with a wet cloth. The best I can do is my best. It is best (at most). The following advice is important to know from experts. Thus, I would say that this is an excellent valve in terms of function. Do you want to I don't think so. Due to the fact that it shouldn't look like they threw it off a mountain after they made it, I removed one star. The appearance of.
We have to wait a little longer to fill our bathtub than we did with the previous Delta fixtures. The mounting holes for the Roman spout on my bathtub are offset from those of the hot and cold faucets (all three holes do not align at a right angle). It was therefore not possible to use the supply pieces that attach between the center spout connection piece and the two faucet connections. To make the bent pieces match the offset, I had to make them myself. Otherwise all components and instructions were present and of good quality. There must be another kit out there for my situation and I didn't notice.
I like this valve in particular because it is a valve, but not just any valve. A remote location of the nozzle is the first step. As part of my installation, I placed the valves where they can be easily reached when out of the bathtub and in the shower. There is a nozzle a fair distance from a drain on an inordinately long bath. Another reason I like this valve is that it is a It seems like they really do care about their customers since they offer a lifetime warranty on both the valve inserts and the finish of whatever trim kit you purchase. This is likely to be your last car. You may pay a little more, but it will be your last choice. With Moen, I have the feeling that I'm getting an old-fashioned experience that is both American made and high quality. Other than that brand, I won't buy anything else.
I used this product to get the water from my street to my house. A plumber I hired installed the array for me. It looked like an easy installation to him. The problem was that he was laying on his back, under my sink, so I had limited vision. There were a few times when I heard him curse.
Despite this, you can change your fixtures very easily once they are installed. I think Moen has come up with a really good idea.
It was a straightforward installation. I had this valve kit mounted to the deck of my whirlpool and connected to the PEX piping. As far as the Moen trim is concerned, everything has worked fine. The item was in good condition, and I would purchase from them.
Then again, this isn't something you use on a daily basis. Getting this to go with my Moon Roman Tub faucets was a no-brainer for me. The fittings are well made and of high quality. It was actually a plumber who recommended them. Despite the possibility that you may never require them, I am happy to recommend them.
The valves seem to be of high quality, but the first one we received had the hot water side soldered at a 45 degree angle rather than a 90 degree one, On the second one we received, the hot water was soldered at an angle as well, but the angle was only slightly off, so we were able to make the faucet handles straight during installation. The problem has been resolved.
Related Products For Moen 4792, válvula rugosa de tubo romano oxidado (bronce a bronce) de 1/2 pulgada con ajuste, 4792
