Kohler K-728-K-NA MasterShower 3/4" 2 o 3 vías válvula de transferencia
Score By Feature
OveReview Final Score
Product Description
Selected User Reviews For Kohler K-728-K-NA MasterShower 3/4" 2 o 3 vías válvula de transferencia
There is nothing bad about this valve. The frame feels very solid, and the trim my wife picked out makes it look wonderful. The following are some things people ought to It can be installed in two different ways either in a 2-way valve or a 3-way valve 3 ways or 2 ways Mode two (caveat for mode one) Below is a diagram showing the way mode. Having read several reviews on several different websites, I thought I knew how it would turn out, but I was way off. These descriptions will hopefully help others figure out the different installation configurations and how they decide what the end functionality of the system will be. The 3-digit code in brackets means A handle can spin 360 degrees (no stops) for a total of six positions (handle clicks) and rotate 360 degrees non-stop for a total of six Positions are A B and C (2) B and C There can be either two or three outputs at one time, but not all three at the same time. Contrary to reports that the valve must be installed perfectly straight in order for things to be aligned, the handle can be adjusted to ensure that the stops are perfectly aligned. The second part of the book There are multiple options available when you use way mode. Follow the instructions on the menu. Certainly a crazy option, but you cannot afford to overlook it. The external plug that separates output A from output C needs to be removed, which means that output A is equal to C and output C is equal to A (see You then cap-) Turn either output A or C off/plug it in. You will then be able to move a spacer from behind the detent (the large white plastic piece) to in front of it, according to the instruction guide (see below). The handle is only able to rotate 90 degrees as a result. Because of this, there are only three positions on the valve (2) Those positions will denote A and B, and the turn will not extend beyond them. The second option is to follow the instructions but skip a few steps. It is how my valve ended up after I had completed my remodel. You still must remove the internal plug and connect outputs A and C in this case. Despite such a limitation, if you do not move the spacer, the valve will continue to turn Due to the fact that A and C are linked, the following is determined A C (2) Putting B+A together As well. There was one position where my shower head was on in my case Both my rain head and shower head were turned on in two positions, and I turned on my rain head in three positions. It is fortunate It is easy to move the spacer after everything is installed and you can go back and forth to decide whether you like option 1 or option 2. 3) Ignore the heck out of it Several reviews indicate that this port can not be removed so it needs to be capped off so it can be off. According to my case, this would have resulted in the following functionality The presence of rain and showers A rainy day A rainy day The game's off. There is specifically no recommendation for risk of leaks in the instructions. Ports designed to discharge pressure are generally not intended to be left under pressure for long periods of time- An expression. The reasons I thought that might be are unknown to me, so I was willing to take a chance, so I was hoping for that. Sadly, it didn't take place and with out opening up the wall the internal plug cannot be changed. There are several options available to you. I wish you the best of luck and you won't regret purchasing.
three shower heads (rain, wall, wand) and this device lets me control every combination of 2, as well as each individually (rain and wall, rain and wand, wall and wand) for a total of six It is best to assure that the valve trim handle is calibrated so it matches the "default" position you would like the valve trim handle to be in (you probably do not want to have the valve trim handle pointing out 45 degrees for 80% of all valve trim uses). The sewer can be adjusted after the fact, but make sure to inform your plumber in advance! The handles also feel "click" into place with each setting of the above 6 settings (you can visually see this by opening and closing the handles). Check to see that the valve you are installing is perfectly straight before you attach it It will be a few degrees off if the mounting positions are not adjusted. There is no real pain but just a strange sensation when I touch it. This is not a problem with the valve, only something to observe as you install it. This system does exactly what it says it will--it splits water effectively, gives tons of options, and does just what it says!.
The device can be controlled by any combination of three Basically I have an overhead rain shower, a wand and a standard. Run 3/4 between the temperature control and the selector even if you are only taking in 1/2 feeds to minimize pressure loss.
It's tricky to take a hot shower with that valve, it may be because the water gets warmer in the summer, but not hot in the winter. When you turn it to max hot, it will become very hot for a short time, but once you turn it back down, it will become Do you think it has something to do with incoming cold water temperature and the no scald feature? The only thing I would like to know if there is an internal setting or adjustment is if there is one, otherwise, it would be a 5 star.
We ordered the wrong model because the product has so many different models, so when the plumber came out to install it, we realized we had ordered the wrong one. There is no longer a grace period for returning these (we purchased two) since the plumber got the correct one. There is no denying that this product is exceptional and very well made, but that is of little help to us today.
The Kohler K-1000 is a new purchase It's 728. Currently there are two or three NA Mastershowers available This is the transfer valve that goes with the Kohler K-1000 The digits 9059 This modern hand shower kit was installed when renovating a bathroom. A Kohler K- series pump was connected to the pump The number 304 For the Devonshire fixtures, we installed a Rite-Temp pressure balancing valve we also installed a Mastershower Valve through the wall to work with the other fixtures. The system works well by getting adequate water pressure that is in line with the pressure in the house. Installs easily and quickly. It would be great if I had to install or remodel a bathroom in the future.
The option to limit is not available. With this valve, you can switch between two or three lines, but the cartridge rotates completely There is no obvious way to determine if the knob has a pointer unless the knob has a feeler. You will be surprised by the water that comes from an The handle can be a lever style even when it isn't When the shower user next uses it, he or she will be guessing where the water will come out of.
I believe this is a poor quality product. It was dirty and the plumber had to take the valve apart and clean it. The mixing of hot and cold is noisy when the valve is open. The situation is extremely frustrating. Unfortunately, there's no information on where you can find the seller. The piece of junk I was sold was a lemon. I would like to know how I can get a refund from the supplier, if you are reading this.
Related Products For Kohler K-728-K-NA MasterShower 3/4" 2 o 3 vías válvula de transferencia
