PANOVOS (8pcs) Pipe Screw Extractor Set,Damaged Screw Broken Bolt Water Pipe Remover Set

He planned on cutting into the wall to replace the fitting (along with some pipe), but he put it off. A large file could be used as a screwdriver, according to one of the videos, which I imagine would work. However, on Sunday, just before ordering a file (after already looking in a chain hardware store), I came across a video that mentioned Pipe Extractors. That was something I had no idea about. I just tried out this set that I picked up. The part was out in less than 5 minutes. Anyone can do it because it is so simple. You'll need an adjustable wrench or a pair of pliers for this, but it's well worth it. The case does not quite close properly, but it does close sufficiently. This is a product that I wholeheartedly endorse.

Callie GODDARD

| Dec 26, 2021

br>br>The plumber insisted on removing the brick, but I refused. I inserted this pipe extractor into the rusted pipe and, with a wrench, quickly backed it out. I was able to save a significant amount of time and money as a result of my efforts. It's well worth it, even if you only use it once in your life! br>br>Note: If you're looking for a unique way to express yourself, try using the words "creative Galvanized pipe should never be used as a water pipe. They rust over time; only brass nipples should be used in their place!.

Tate Lyons

| Oct 05, 2021

I used PB blaster for a few minutes to help lubricate the threads, then inserted the larger extractor and slowly turned it to the left with an adjustable wrench; the old thread portion was out in a matter of minutes. This is an excellent extractor set to have in your toolbox at home!.

Alejandro Harrington

| Oct 28, 2021

These aren't hardened "high carbon" steels, whatever they are. After softening a seized bolt that had snapped, I tried to use them to remove it, but they just stripped almost instantly. All four of the smallest extractor heads now appear to be smooth cones. One of them is a straight shooter. up was snapped in half, with a piece of semi-precious stone embedded in the middle. The screw in question is made of hardened steel. To remove the part, I had to use an angle grinder. br>br>I've seen these exact units work well for some friends, which leads me to believe there are quality control issues. br>br>tl;dr These things are probably fine and will do the job if you're working with soft metals like copper or tin, but you could almost certainly get a better bang for your buck elsewhere. If you're working with steel, you'll probably want to go with the Irwin extractors or something even nicer.

Lucy Galvan

| Jan 01, 2022

You may be disappointed if you purchase this set in the hopes of extracting something other than copper. I'm giving this product a generous three stars because of the low price and the fact that it worked for my specific application this time, but I don't have high hopes for it to work in harder materials. I needed an 8 and could have spent more on a single good extractor bit than this entire set cost, but it was so cheap that I decided to get the set just to have the other sizes on hand in case I needed them in the future. While the extractor was successful in removing the stuck brass cartridge, the threads on the bit were slightly damaged. I haven't tried it on anything tougher yet, but I doubt it will hold up to iron pipe or hardened steel, so think about what you'll be using it for before you buy, or save the money and buy a better tool.

Robert Barr

| Apr 05, 2021

I just got my set for removing a corroded galvanized nipple for my hose bib that was slowly leaking behind my brick wall. With a small hammer, I tapped it in snugly and attempted to turn it. nothing. I gradually tried working it in both directions, and after a minute or so, it began to let go behind the wall. To ensure that the main connection was not moving, I used an inspection camera in the mortar between the bricks. The old 6" galvanized nipple was completely removed, and a new 8" galvanized nipple was installed. If your hose bib is flush against the wall, you will need to use a slightly longer one. If you don't, you won't be able to re-thread the nipple without damaging the threaded portion of the fitting.

Aiden Ortega

| Sep 21, 2021

In one of my new home's bathrooms, I went to replace the showerhead. I had no idea the showerhead was rusted to the shower arm until it was too late. I talked and twisted, and what I thought was progress on the showerhead turned out to be a shower arm break. I ended up breaking the shower arm that was protruding from the wall. "Well, here's a $150 plumber bill!" I thought as the pipe was snapped clean off at the wall. " But then I came across a YouTube video about my issue, and I discovered a tool that they recommended for solving it. " So I went to Amazon to look for the tool (or something similar), and I came across this set! I was a little skeptical because it wasn't the exact item recommended in the video, but it worked great! I was able to remove the broken pipe from the wall-mounted pipe and replace it without difficulty! This tool is extremely simple to use and extremely effective! This product is completely recommended by me.

Lily CHADWICK

| Sep 17, 2021

I'm a plumber who works in the commercial sector. Pipe/nipple extractors are something I use on a daily basis. In my search for the best style, I've bought every one available. These, I believe, are the final items. Because these have multiple twists in the body, they provide more surface area on the damaged nipple, which is why they are valued so highly. They are biting more quickly and with greater force. I also use cam action ones, which offer the best solution and access to nipples deep in a wall. These should be your first purchase because they are extremely effective.

Moshe FRASER

| Dec 10, 2021