Klein Tools D228-7 Pliers, Diagonal Cutting Pliers with High-Leverage Design, 7-Inch , Red
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As a side benefit, they are also good for removing nails from boards as well as cutting just about any nail. I keep an old pair in my tool bag when I am framing, however, and they cannot really be sharpened.
As a relatively thin and easier to work with wire, it should cut bailing wire easily. Cut back a few minor shrubs, pruned coax (RG- 6 and 11), and bonds wire (14-gauge, 16-gauge, and 10-gauge).
I used to work in firefighting so I would not recommend this because they would not work against the cable, so you'd need to make many cuts, which you probably don't want to do while trying to disconnect the battery. There is an advertisement for pliers that resemble a parrot's beak, it comes from an artist If you want a pass type cutter, that is what you need. There's no need to cut more than one time. check Amazon for stock numbers and find out if I can find a pair.
You should be able to use it. This 16 gauge wire is designed for electrical work, and 16 gauge wire is smaller than 12 gauge wire, which happens to be standard household wiring size. At least, that's what I think. There seem to be a couple different gauge systems involved
Selected User Reviews For Klein Tools D228-7 Pliers, Diagonal Cutting Pliers with High-Leverage Design, 7-Inch , Red
I usually love Knipex tools, especially the combination pliers and side cutters. This is not to say however that Klein is not as good a product as Knipex. The feel of these is a bit different from Knipex, because they feel a bit less "precision" and more "tough" rather than American clog iron. These tools are nicely riveted, and the jaws are perfectly lined up, and the opening action is silky smooth. It is clear they put a lot of time into the riveting process. This tool has thick and well adhered grips, so I do not anticipate any future problems with the grips becoming loose or falling off, as is sometimes seen on tools bought at a hardware store. Despite their reasonably smooth surfaces, the linesman's grip and cut well. The side cutters are sharp, and the longnose pliers are well etched and exceptionally Overall, these are a great value, and especially for the price. It's not much of an investment to spend 20 bucks on one tool when you think about how long they will last and how long they are going to be around. I highly recommend this product.
While the cutting head of the cutters is not large, the jaw opening is large enough to take up any task they were designed for. They are of a very comfortable design, and I have never felt the need to apply excessive pressure to them. It isn't often that I use these and sometimes I may not even use them for a month because I am not a tradesperson. While they have manufacturers limits for what diameter and material they are capable of cutting without damaging the surfaces, I have not taken heed of them. They can be used for cutting any conductor, from electrical cable (they work beautifully for this), to nails of various diameters found in home construction projects (up to 7-8 Alternatively, I use them to cut high tensile farm fence wire (10 AWG) so I can use them for that as well. I have not damaged the cutting edge so far. This could be explained by the fact that as I am getting older my wrists are weaker than they used to be. In spite of the fact that they weren't designed for abuse, the cutters are still of very high quality and should last for many, many years when used according to As a consequence, my old (unbranded) cutters are now 25 years old and they are still functioning, but with a shorter handle I cannot apply as much force as I used to!.
This is evident in the first image, where the jaws appear to be out of alignment. If used for most of the time, the pliers will work fine, but not for cutting thin flat stock with precision as shown in the second The quality control department of a decent manufacturer would never approve misaligned pliers at this price point. As a result of the time and hassle and as a result of the fact that I will primarily use them for cutting back the wire near the hinge, they should work perfectly fine.
This is a great You can cut great with these! There is no way you can go wrong with them for the price. I have made several cuts and they are still as sharp as when I first There are a lot of other brands of plying machines and none of them hold a cutting edge like these ones. Their shape fits in the palm of your hand well. It is easy to cut wire with them. I was happy with my purchase, and I am sure you will be as well. These dykes are the best quality out of any other brand I've used.
The items work like new after about a year of use. I've been using them for about a year now. Since I am a marine mechanic (not in the US Army), I use these tools on a daily basis. It can be used to cut electrical wire and cable, hard and soft cotter pins, tie raps, and shift cable core wire. The jaws are in excellent condition. Since my last good pair of Channel Locks walked off, I haven't used them. Three new CL brand pants were bought, none were able to last longer than a week before the cutting edge chipped. A week after they were installed, the third pair chipped out because copper wire was the only thing they were used for. It has been a year since we got the Klein's and they Although I am not sure, I believe they are still made in the U. S. It doesn't matter if they won't work since they'll still As much as I thought this review would be a negative one on Channel Lock, I wanted to illustrate the night and day difference and my own experience. Why are the prices so high? I do, but not as much as a pair of CL's each.
When it comes to Klein, I've heard nothing but good things. It is usually the case that these claims are In fact, I was disappointed in these dykes because I wanted them to be used for general handyman projects. One of my only complaints is the wobbling of the handle. It is a good knife but the handles wobbling a little. At the tips of the handles, maybe a sixteenth inch would be enough. The fact that they don't mate perfectly when closed means that they don't fit together This will result in the blade becoming dull, which I am concerned about. There has never been a problem with a pair of Klein linesman pliers that I own. The pliers are a little disappointing to me. I don't know if this was just a fluke or something more serious.
This is a six-year-old one that is in my main toolbox, while this one's identical twin is in my bike repair toolbox that I just ordered from Amazon. Even though it's six years old, the pair has cut through a number of metal strands and plastic zip ties and is still as effective as it ever was. The packaging of children's toys often includes zip ties, so I always pull out my trusty pair when my son wakes up on Christmas morning. Having also used these pliers on everything from telescope repair to rebuilding an engine, I can say that they are built to last. What I cannot tell you is what type of steel they used, but it is extremely hard (I assume it is one of the strongest In spite of the fact that this model is six years old, it still has sharp cutting edges. I am therefore getting a good value for my money. Easily one of the better side cutting pliers out there, and I would recommend it to anyone who needs such.
This is the same with all Klein tools you pay a premium and get a premium product. If you consider that this tool is going to be perfectly good for my job, then you can definitely justify the price. You can buy it for your grandchildren for a good price. In order to determine whether a wire cutter is good, it must have no gaps in the jaws and be able to It's true for these.