Channellock RT-3 Convertible Retaining Ring Plier Set, 3-Piece, Blue
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The Channelock factory in Meadville, Pennsylvania, is located in the United States.
Mine are, according to my calculations. 093/. The standard method of measuring a hex is 094" across the flats. However, if I measure the distance between the hex's corners, it comes to about. 105". I like them; they're great, and they've replaced broken retaining ring pliers from a similar set. I hope this has been of assistance.
Internal and external dimensions are both limited to 2 inches, according to the description. I couldn't get them to work on my AC coil snap ring, which is probably just under 3 inches in diameter.
They're made to be used with snap rings.
Selected User Reviews For Channellock RT-3 Convertible Retaining Ring Plier Set, 3-Piece, Blue
To say the least, the supplied pins are not of sufficient tolerance, and neither of the two bent pins is functional. Inspectors at Channellock should have caught the silver ones in the picture, in my opinion. I've had a lot more success with their other tools. This was a huge disappointment.
I had to get a pair of shoes at some point. I wish I had read all of the one-star reviews first, because these will not even come close to closing if you need the ring to do so. The jaws, as previously stated, have play in them and will not close completely, rendering them useless. I had to finally get a pair of needle nose pliers and use them to help close the jaws. It's complete nonsense.
These were purchased in order for me to repair a Kitchenaid mixer that had broken. They're a better tool than what was required for the job, but it was difficult to know which pliers would work (a number of snap ring plier reviews on Amazon begin with "didn't fit my KA mixer"). ")br>br>I chose these because at least one of the interchangeable tip sizes appeared to be a good fit. The tiniest ones are the ones who make the most noise. br>br>They're unlikely to see much use from me, so they'll probably be the last pair of pliers I'll ever need. They're well-made, and the switch that changes them from inner- to outer- to outer- is slick. If you've never used these pliers before and need to work on small snap rings, notice that you can bring the pins closer together simply by extending them further away from the tool's ends. Also keep in mind that whether you mount the pins pointing up or down determines whether they angle out or in—if you mount them the wrong way around, the pins will simply slip off the snap rings.
The pliers are adequate for my needs: removing the retaining rings from the dropper posts on a mountain bike They have the advantage of being able to switch between internal and external modes, and they are a fraction of the price of the Park Tool version. The blue handle goes well with my Park Tool collection. My only gripe is that one set of tips had a pin with the 90-degree bend pointing in the wrong direction (see photo). The tips will not be level when they are inserted. They're fine except for that.
A 2 1/4" external snap ring was required for a job I was working on, and the 8" snap ring pliers I had (not Channellock) were simply not up to the task. The pliers' tips were too small to hold the ring in place, and the pliers themselves were too flimsy to handle the larger snap ring. I finally decided to get a better set of snap-ons after several failed attempts. Ring pliers are a type of pliers that are used to hold rings together I was initially put off by the cost of these 10" Channellocks, but after receiving them and putting them to use, I believe they are well worth the money. The black tips-br>br> which was a perfect match for the target a perfect ring- The included Allen wrench made it simple to swap out the pliers, and they fit snugly. The hex- The hex-shaped tips are a good match for the hex-shaped hex-shaped hex alignment is simple thanks to the pliers' shape. br>br>And, best of all, these 10" Channellock snap-on doors come with a lifetime warranty. The ratcheting feature on ring pliers keeps the opening you set until you release the tension with the thumb button on the pliers' handle. When removing or installing the snap ring, the ratcheting feature makes it very simple to get and maintain a precise opening pressure. br>br>These pliers made removing the 2 1/4" snap ring a breeze. Only time will tell if they last as long as my 20-year-old ones. year- I'm still getting used to the old Channellock pliers, but they've served me well so far.
A 6 mm snap ring is shown in the photo. Anyone who has ever attempted to remove and reinstall a ring of that size (SMALL) knows that it will almost certainly be discovered by the vacuum after it has flown off into the room. On many levels, this is an excellent snap ring plier. It first comes with a variety of tip sizes, as well as straight and 90 degree tips. They're easy to swap out with the Allen wrench included, and they all fit into a small pouch to keep them together. When they engage to ring, the spring tension is just right, low enough to provide feedback. With a simple flip of the toggle, you can easily switch between inside and outside rings. You'll need about an 1 inch for the inside rings. They have a 25" reach and can go all the way up to. The diameter is 75 inches. The grips have a plastic coating and are easy to control. Aside from the fact that they're fantastic, what's the best thing about them? They're designed and manufactured in the United States of America. I have a set of snap ring pliers that I bought to replace the bearings in the bandsaw blade guides. My other ring pliers have fixed diameter tips and require you to switch the handles for inside or outside use. As you can see, I'm a big fan of this tool. It is well worth every penny, and there aren't many of them.
The engineers at Channellock came up with a brilliant design. These snap ring pliers are made in the United States, so I know they'll last a long time. I planned on saving money by purchasing one of the $5 snap ring plier kits. I'm glad I didn't go for the cheapest option. If the snap ring pliers are not made of high-quality materials, the tips will bend easily. Because the Channellock snap ring pliers are made of the highest quality materials, I am confident that they will not bend. Instead of wasting money on a less expensive brand, invest in the best.
It works well, but the mechanism should be handled with care. It's easier to engage the lever by lightly squeezing the pliers. It works fine once it is set in the proper mode; those who have problems or break it are probably forcing the lever without moving the jaws slightly. The spring was missing, so it received a one-star rating. To eliminate the slop, you may need to tighten the center screw slightly. Mine had a lot of play in the jaws. I also noticed that the pins were slightly off-center and didn't quite line up. br>br>Continue reading: I requested a replacement for the spring because it was missing. It was sent out by Amazon in a single package. Shipping is available the next day. The replacement was tighter (which is a good thing) and the pins were perfectly aligned, which was excellent customer service. The spring was also present. Although quality control could be improved, it is still a useful tool. I've taken out a few test rings and everything looks good so far.