RIDGID 29963 Model 35S Stainless Steel Tubing Cutter, 1/4-inch to 1-3/8-inch Tube Cutter (2-Pack)

As a result of cutting the steerer tubes on my bikes with the tool, it made a great job of it. What I'm not sure is how this thing managed to do this well is. My wife praised my technical ability and noted that while I wasn't experienced with it, he thought my cutting looked great. She wasn't scared at all during the rest of the day and became a little more flirtatious after finding out that she is perfectly suited to handle the task. Although this tool might be as good and beneficial as the bike mechanic I am proud of, when it comes to actually working with this tool. had a $10 tube that cut just once in a third cut when using it cut on aluminum top tube only after the third use. chromoly steel was used specifically in this bicycle so the forks and steerer top tubes would perfectly be cut. You should read this book.

Jamal Wilcox

| Mar 16, 2021

According to a complaint that I filed about RIDGID 29963 Model 35S stainless steel tubing cutter, I had trouble cutting my steerer tubes. It is also possible to cut aluminum tubes with the rigid 29963 model 35S. Stainless steel tubes can range in diameter from 1/4 inch to 1/2 inch. With its large knob and durable construction, this tool has the capability of cutting through the wood with ease. It is convenient for cutting without drilling. In a typical pipe cutter, the blade is made up of bearings and rollers instead of blades. While having a great time doing these, I had to make sure I made sure I made the best cut possible that would not take away anything from the product. Made out of a steering tube that is 1 inch thick and 1 3/4 inches wide. In order to remove the burrs left behind, a few filing slips need to be filed. I feel very pleased with this pipe cutter and have a lot of uses for it in general. Using this tool allows my hand to clear my steerer tube or handlebars in future. My aim was to provide you with useful information in my review. I am glad you took the time to read it ook the time to read it.

Jayce Ramos

| Sep 13, 2021

I don't get it done at local home improvement stores. This is the reason of course. I didn't want to spend any money on investing in an actual pipe saw as it is very rare for me to use one at this particular time. The best tool I could find wasn't working. It's easy to use, it's incredibly affordable, it can be very accurate and you'll really be proud to be using it. The edge may be sharp, but I don't intend to care for that. Although it takes a few dozen times to drill the pipes, it isn't possible to estimate how long it will last. I thought the end had almost as much to do with the beginning as it did.

Zyair Garrison

| Mar 31, 2021

It's a great tool for getting things done. The laser cut stainless steel tubes without sparks, causing you to achieve exactly what says on the manufacturer's box - no loud noises or sparks. As my cutting path, I needed an inch thick wall to get the track up to 10" thick. I needed a 1" diameter stainless steel shower guide rail for this task. Despite my patience and careful working, but even using the tool with such care, cutting continued steadily until I reached the end. It is a flaw in my amateur cutting technique that it is uneven and not straight from start to finish. Even as I was cutting my tube and realized my wall was over 1/8" thick, I tried to lower it even more, but I didn't recommend it since I was just under a foot underneath the wheel's depth while I was cutting. I also felt some resistance from the blade.

Juliana Hart

| Mar 07, 2021

Plumbing us normally involves working with tubular pipes. Stainless steel and carbon steel can be found in stainless steel. In square centimeters, 120 inches would be an inch wall. Several tube cutter brands have appeared over the years, since I have been using them for many years. Its tube cutter I/we use was built for industrial use. This tube cutter is ideal for use in a working environment as well. The bearings installed during manufacture allow for smoother cutting actions, allowing the cutter to not stroll down the tube on its own. Anyone in need of a tube cutter should check out this company. There is no need to replace this tool as it is well made. Having spare cutting wheels makes them more durable and keeps them out of the hands of thieves, as they become dull and sometimes even break over time.

Keily Gamble

| Mar 31, 2021

For the purpose of cutting stainless steel tubing in my job as an R&D engineer for automotive aftertreatment software D is used. There are some advantages to the system in that application. The only difference between these two wheels is they have a certain brittleness to them. The wheel should not come across any force. Make sure to look for the spare wheel in your adjustment knob as it might serve you better if you happen to be stuck in the middle of the cut with no wheel.

Aspen Nunez

| Sep 27, 2021

The cutter was used for tubing that has a diameter of no more than 5. 5%. My preference was to buy the Rigid model as I needed to finish about 150 pieces, and although I saw cheaper versions of those tools but chose that 'brand name'. Spending a few additional dollars on an upgrade was a wise move. As there's a knob there for easily adjusting, both after and during each pass, it's pretty accurate and easy to operate. There is also an add-on cutting disk, which is going strong for the original disk. Following the eighty cuts I made already, there is nothing left but good news for the rest of us. Two cutting discs were purchased, but I am not sure whether I need to replace them or not due to the strength of the original disk.

Leia Serrano

| Oct 28, 2021

Excellent performance in well-being. My tool is suitable for cutting thin wires- I was doing a project on my boat, but I didn't want a straight-forward cut, much less one like a hacksaw's. that is where this tool came in handy. A cutting wheel does not have rollers on the opposite side. In that case, it's all there. Having a large amount of quality comes with great benefits. Using this method, the cutter remains extremely perpendicular with the tubing, guiding the cut perfectly. It may, however, be important to pay attention to this: if a very thick metal circle does not come into contact with the cutting wheel, the spiral will be traced and can be traced. Cutting the tubing hard enough is difficult since it needs to be held in place a second time. Therefore, my first cutting caused it to malfunction. Having restarted the cutting process in case it broke, I added more pressure to the first cut and it continued to work. Five cuts are needed before heavy tubing can be cut. There was a minor amount of imperfections found in the cut, and the only hint of touch was subtle. Using a cotton ups Emery cloth, these burrs can be removed from the inside cap. While working with this tool, I completed four separate cuts including the last one perfectly. This tool has a diameter of 18" and will accommodate any tube up to an inch long. However, Ridgid does not specify the thickness of the tube that can be supported. Having stated that, I have a 1-year outlook. It was unaffected by the latter number with the exception of the diameter of the tubing which is 14 inch.

Fernanda Petersen

| Jul 09, 2021