Wagner 0503049 HT4500 Heat Gun Tool Set soften paint, caulking, adhesive, putty for removal, shrink wrap, bend plastic pipes, and loosen rusted nuts or bolts
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
My sincere thanks go out to you for your As of right now, we do not have a heat gun that will show Celsius degrees on the If you have any technical issues, please contact our technical support services. Contact us at We are here to help you if you have further questions.
In short, yes. The voltage is 110 volts and the frequency is 60 Hz
In spite of the fact that our Heat Guns are tested in over 100 situations, we do not test them for When you are trying it on a thing that's never been tested, we recommend you take safety measures. If you have any technical issues, please contact our technical support services. Contact us at Please call 8251 and we will be able to help
Nozzles from Furno can be interchanged with nozzles from HT4500. As for all other heat guns on the market, I am not certain. They're not interchangeable with the rest of the Wagner heat guns or with the HomeRight heat guns. I'm not sure about all the other heat guns. We can be reached by phone at 1-877-777-6772 if you require any further information Contact us at
Selected User Reviews For Wagner 0503049 HT4500 Heat Gun Tool Set soften paint, caulking, adhesive, putty for removal, shrink wrap, bend plastic pipes, and loosen rusted nuts or bolts
There is a lot of air flow and it produces a lot of heat. It actually seems to be a bit stronger in terms of aeration and heat than the Makita HG6530VK, which I find to be quite good. A lot of noise can be generated by the HT4500. With the loud motor, and the high pitch ring produced by this gun, it is like a three-dimensional ring. There are some settings of the sound that cause the noise to pulsate, sort of As for me, I wish it was quieter, but I don't mind. The one thing I didn't like about the grip was the rubberized feel. There was an excessive amount of sticky feeling. A few minutes after use, the grip started forming a sticky residue that looked like No matter how hard you tried, you couldn't get it to come off. It just produced more sticky goo when you rubbed the grip. As of right now, the replacement has worked fine. But if the handle gets gooey and sticky again, I may have to tape over it or cut it out entirely. My preference would be the Wagner HT4500 if I had to choose between it and a Makita. It is difficult to skip the Makita heat gun when it is so very good. I agree that the HT4500 will be noisier (the Makita is extremely quiet) but the heat from the Wagner will feel more intense, as well as the airflow coming from it. The results from an anemometer showed that the HT4500 had a faster air speed, so I couldn't clearly tell the difference between the two. Also, the Wagner has two features the Makita does not have. There are 5 speeds and it is about $80 cheaper than a comparable product.
My review is for the HT4500 from D-Link. I am satisfied with my purchase so far. When I looked at the Wagner website, this model did stand out for my requirements, and it became available sooner than when I first looked. I had intended to get a more basic model, but when I compared the specs, this one stood out as being ideal for my needs. I believe that not only did the shipping time improve, but that the price also dropped to a more reasonable amount. I think a more qualified seller happened to make this item available just as I was preparing to purchase it. I initially noticed a bit of an audible whine when using it for the first time. However, this whine disappeared quickly during use and hasn't returned when I've used it for several days now. As you can see in the photos, I added photos showing the accessories and the case that has a proper storage area for the manual, all of which add to the versatility of being able to find what you need when you need it. You can adjust the temperature in 20 degree increments, starting at 120 degrees A temperature of 1200 F is reached. Since the gun responds very quickly to temperature changes and heats up quickly, you can pick it up, turn it on, do what you need to, and then turn it off afterward. If the item is resting on its back, pointing up, the fan can be adjusted independently from the temperature and it is stable on a bench. You can rest it vertically if you need to use two hands and to wait for the gun to cool down while you do work. Cool down even without using the feature on this heat gun is very quick.
I bought it after my garage was broken into. It was not necessary to purchase a high-end heat gun, as I could have bought more cost-effective (CHEAP) ones. Wagner is a very good business with a very good One of the factors that led me to choose them was the reputation they had. I unboxed the heat gun as soon as it arrived, and was very pleased with the design and build. There is very little weight to it and it is easy to Having turned it all up the hard way, I learned to not turn it all down. I like how quickly and hot this thing warms up. I think one of the best things is having the ability to control the temperature. There used to be a low or wide opening. You can have a blast here if you are looking for a fun show. My machine has done everything that I have asked of it, from cold shrink to soldering. This was just an experiment to determine whether the solder would work, and not completely.
The carrying case, the digital temperature readout, and the relatively quiet operation are all great features. PWC seats were cleaned with it after using it to remove high strength adhesive. I ran this at 800 degrees for 45 minutes two times, and both times it worked well. So far it looks like a solid build, so I wouldn't be surprised if it lasts for several years until it develops an electrical problem.
A PVC pipe bender is a tool I bought for bending pipes. I am an electrician. I find this product to be easy to use. They are very well labelled, and there is a mini screen that you can see when you change the temperature or the speed of the fan. It heats up very quickly. With its handy size, light weight and good design, it is a good choice. It comes with a case and extra parts. Purchase was good. I am very happy with it. My recommendation is to try it.
There are multiple settings on this machine, it is very well constructed, the cord is over sized in order to facilitate fast heating, and the tips are diverse and can be used for a variety of The unit comes in a very professional black plastic case that seems very durable. You will find the buttons of the unit to be very responsive and self-explanatory This is self-explanatory. In my opinion, this unit is a great buy for anyone looking for exceptional quality An electric heating gun that heats to a certain temperature.
The fact that different speeds are available is very attractive to me. When it comes to small jobs, this is critical. As well as starting the barbecue pit, I also use this to keep it warm. Hence, go to the store and buy this, then light up a fire at home. The brand is well-known for its heat guns. I had a model 1100 that lasted for over ten years, which I still have.
It's great how you can control the temperature. I like that the controls are located on the back as well. I used to have the controls on the front of my handle for my last heat gun. Once heated to the desired temperature, the device cools quickly. A great feature of the cool down is the ability to set a timer. It's easy to use and doesn't weigh much. It cools the gun down pretty fast. Stripping paint is no longer a chore but a pleasure.