Environmental Technology 32-Ounce Kit Lite Pour-On, High Gloss Finish, 2 Piece Set, Fl Oz
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
It's been on my counters for three years and is still going strong. I'm sure it'd last another ten years with no problems!
Yes. On a large acrylic painting on canvas, I used it. I've been using it for about a year and a half and haven't had any cracking or yellowing issues. I haven't put the flexibility to the test, but it appears to withstand mild flexing and stress. Because, like any glaze, the paint color is slightly intensified after pouring and drying the resin, you may want to test small amounts if you're concerned about color matching or blending. If you want the texture to show through, build it up high and drip off as much excess resin as you can before leaving it level to dry. Antibiotics are commonly used to treat infections. Applying the resin to any other surface requires the same bubbling techniques. Acrylic paintings on wood surfaces also look fantastic with this product.
Yes, you must scuff sand and wipe the surface clean before applying the coating.
38 X 38 X 2 = 2888 cubic inches is the simple math. That's twelve. 5 gallons total If the 2 inch height is occupied by objects, the volume of the objects must be subtracted from the required product volume.
Selected User Reviews For Environmental Technology 32-Ounce Kit Lite Pour-On, High Gloss Finish, 2 Piece Set, Fl Oz
After reading all of the positive reviews, I decided to purchase it in the hopes of having a positive experience as well. Nope. br>br>I used this to seal my Giani White Diamond countertop, which I refinished. My countertop was absolutely stunning before I slapped this nonsense on top of it. I bought measuring cups, so I knew the mixture ratio was correct, and I followed the mixing instructions, so that part was correct as well. br>br>For the first week, it looked fantastic. It began to yellow along the back of my counter after that. The yellowing has now spread to half of the counter, about a month after the application. It appears to be a complete disaster. Because of this garbage, my entire bathroom remodel has been ruined. I'm at a loss for what to do next. br>br>Because the bathroom has no windows, sunlight is not an issue. This isn't a factor because I haven't used the countertop at all this month. br>br>A word of caution: This stuff should be avoided if you're using the Giani White Diamond kit!.
Excellent value for money - I don't see why you'd pay twice as much for art resin when this one works just as well. br>br>ON THE OTHER HAND. It eats ink that has been tainted with alcohol. It does for the Adirondack inks, at least. I used this as a clear coat on tiles that I'd done alcohol ink painting on, and despite giving the ink 24 hours to dry completely, my vibrantly multicolored tiles in blue, purple, fuchsia, and turquoise ended up pale mottled teal after applying the resin coat. Except for a smidgeon of turquoise ink, the resin *ate* it all. Before and after photos of painted tiles with resin. Yes, those are the same four tiles as before. The only difference is that this resin is different. br>br>I tried using alcohol inks to make transparent colored resin for artwork separately, but the color faded in the time it took me to add and mix four colors into four cups of resin - When I went to pour them, they were barely colored, and after a few minutes, all of the color had vanished. br>br>So, except if you're trying to do anything with alcohol inks, it's a good product. This product should not be used to seal alcohol ink on tile because it will ruin the artwork.
Warning: This product should not be purchased unless you first order (or already own) a mini torch similar to this one. The SE MT3001 Deluxe Butane Power Torch with Built-In Ignition System is a high-quality butane torch with a built-in ignition system. The product is excellent, but it would have been a very poor finish if I hadn't used a mini torch to remove the bubbles. You can blow on it to clear bubbles (the carbon dioxide from your exhale pops them), according to the directions. Before I remembered that I had a torch, I tried this method. You'll die from blowing the bubbles before they're gone, believe me. Maintain a constant movement of the torch across the surface. Because I kept the torch on a bubble for too long, I have a bad spot on my mosaic table. The lamp will be placed there.
The instructions that come with the package are a little confusing. I've purchased this epoxy for a variety of craft projects (jewelry, coasters, and even a bar counter top), and they've all turned out beautifully. The instructions included in the package are quite detailed, and there are plenty of additional resources available online. This appears to be the preferred brand for pour-overs. It's the only brand I've ever used for epoxy. br>br>It is critical to mix EXACTLY equal parts of the resin when using it. the substance that hardens It's not possible to simply combine the two bottles. It is to be expected that it will perform as expected. Investing a few dollars in plastic mixing cups with printed measurements on the side (which can be reused) is well worth it. Simply wait a few days for any remaining epoxy to dry. then remove the peel). Also, make sure to do double mixing (mix for 2 minutes in one container, then dump into a second container and mix for another 2 minutes). br>br>The only problem I've had with this product is that I let it sit in the mixing cup for too long before pouring it. After doing some research online, I discovered that dumping the product onto the surface you want to cover and then spreading it out with a wooden or plastic putty knife is the best way to go. When hardeners are mixed together, they begin a chemical reaction, which is accelerated by the smaller the container. When I left the epoxy in the mixing cup for too long (trying to cover each coaster one at a time), it turned into cottage cheese and had to be discarded. On my second attempt, I poured a few tablespoons of epoxy into the center of each coaster before spreading it out. If you get the epoxy out of the mixing container right away, you'll have about 15 minutes to work with it before it starts to set up. br>br>While the recommended surface area appears to be correct, it is based on a pour depth of about 1/8". My counter top had pennies underneath it when I poured it, and the pour depth between the pennies was about 1/4". This required a seal coat to be brushed on, followed by a flood coat to be poured on 5 hours later. I had no problems with the epoxy hardening properly. br>br>For smaller projects, blowing on the bubbles with a straw will work to pop them. A blow torch or a BBQ lighter, on the other hand, will be required for a larger project. Also, make sure you're working in a completely clean environment (this stuff attracts dogs). people's hair for the first 24 hours) and use a foam paint brush to wipe any drips off before the product hardens. It will take at least 72 hours to fully cure after the tacky phase has passed. In addition, the room's temperature should be kept between 65 and 70 degrees Fahrenheit. The temperature is 75 degrees Fahrenheit. br>br>There are a TON of videos online, and this is a fantastic product if you follow the instructions to the letter. Measurements, temperature, and other factors should not be taken by a hunch.
Working with such a large area is extremely difficult. I'm working on upgrading the countertops in my small kitchen. The total length is 14 feet. I didn't buy enough the first time, so I sanded it down and tried again with more than the manufacturer recommended, which should have been plenty. I'm out of money once more! br>In addition, I live in an old house that isn't level. Because my countertops slope to the back, the self-leveling epoxy wants to settle to the back, leaving divits and errors in the front. br>The well-worked-out area appears to be lovely.
Tips: This should only be attempted if your countertops are perfectly level. Make sure you follow all of the instructions. Get a blow torch (you'll pass out from blowing bubbles before you're finished, lol). Also, cover everything with tape. br>In the end, this product appears to be excellent, but it did not meet my expectations.