Shower Head Holder Adjustable Handheld Brass Shower Head Bracket Shower Wall Mount Holder Shower Wand Holder , Drill Free Adhesive(Polished Chrome )
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
To facilitate installation, we provide free adhesive glue in every package. The installation is easy as pie with an installation manual in just a few minutes, no drilling or screws are required, and there is no damage to the wall. I wish you all the best, YDmeet
Rotates easily when a shower wand is inserted, but only when the shower stem is removed. It can actually be challenging to move or rotate the holder by itself (without the wand inserted).
Thank you for your question. I hope to hear from you soon. There is an adhesive glue included in the package so there will be no drilling required. This glue holds the handheld shower securely and stably with no screws needed. While the adhesive glue can be removed, it is suitable for use on smooth, even, and non-porous surfaces The surfaces of the earth are fragile. In order to maintain safety, we suggest that you do not remove the shower head holder after installation if you have installed it on fragile surfaces (such as mirrors, fiber glass, etc). Thank you for your time, and I hope this was helpful. It was a pleasure working with Please accept my sincere thanks, YDmeet
The glue that came with my set is very strong. You will be able to hold very tightly if you let the glue cure thoroughly.
Selected User Reviews For Shower Head Holder Adjustable Handheld Brass Shower Head Bracket Shower Wall Mount Holder Shower Wand Holder , Drill Free Adhesive(Polished Chrome )
In a nutshell The shower head can be adjusted 360 degrees, it's a very good product. I bought it for my daughters since the shower is too high for them and they cannot reach it. Having installed this new shower hook, they are now enjoying their shower time, and I have less work to do.
My original shower head was ABS plastic, and after several years it started exhibiting cracks in the plastic. I changed to this before it failed, causing my shower head to hit I'm very pleased with my sprayer. The gimbal allows me to adjust the angle very easily, and is strong enough to stay screwed firmly in place. In my experience, following the installation instructions to the letter is easiest after wiping the area with alcohol and letting it dry. The adhesive provided is very generous and it required very little adhesive to install. I enjoyed my experience very much!.
The perfect size for children or people who are shorter. I found this to be very easy to set up. As long as I follow the instructions, I haven't had any issues. It definitely needs 48 hours for the glue to cure fully. In order to keep it in place while the glue dried, the sticker was perfect. It will slide down as the hook is heavy, but without the sticker it will stick to the surface until the glue cures properly. If you plan to apply a sticker to the hook, make sure you remove all the excess glue. When you remove the sticker, there will be parts of the sticker that remain on your wall. Since it has been in use daily for over two months, it has been used daily. The use of this device has been excellent for my child. As you can see by the photos, she has no difficulties adjusting or readjusting the shower wand. The hook is hard to adjust by hand, but once the wand has been hooked into it, the hook automatically adjusts based on the angle desired. A downward angle was needed for this hook so that we could use the shower wand.
Thus far, this product has been working well for me. It did drop once during the install, but as long as you follow the directions, you should have no issues. Of course it has only been a couple weeks, so I will give you an update on the longevity if it ever fails
ProTip(Not It was important to make sure that the adhesive did not come in contact with water during the curing procedure, so I applied painters tape along with the provided sticker. It did not fall off the wall but it does seem to be a little droopy after 48 hours? *Update 4/16/2021
It did not fall off the wall but it does seem to be drooping? Perhaps the weight of my shower arm is too great, or maybe the arm doesn't There's no effect to its use, but if you were going to keep the arm there and use it that way, it would be aggravating to constantly tilt it back up again.
My husband and I replaced our standard shower head with a "6 Functions Handheld Shower Head Set Hopopro High Pressure Shower Head High Flow Hand Held Showerhead Set with 59 Inch Hose Bracket Teflon Tape Rubber Washers" we While it's a beautiful piece, the mount made it hard to reach it easily, so it didn't fulfill the goal we had. In order to mount it lower on the shower wall, I looked for a bracket that would allow us to do so. received really nice reviews, so I thought I should give it a shot. I think it's fantastic! In regard to installing it, it is quite straightforward. After cleaning the tile with rubbing alcohol and carefully drying the area where I would place the bracket, I drilled the holes for the bracket. Using the mounting adhesive provided and holding the bracket in place with the tape provided, I mounted the bracket. Despite the lack of instructions, I was able to figure out what to do from the images. In my case, I peeled the backing of the tape off before installing the brackets on the tile (something they should provide instructions for). that was done, I placed the bracket on the wall and adhered the adhesive to the back. Taping the bracket to the wall after placing the tape across the bottom ensured that it Fourty-eight hours after I taped the bracket, I removed the tape and placed the hand shower. There is perfect fit and it can be moved up and down as well as sideways, so that the water flows to where we want it to. According to the packaging, the adhesive appears to be similar to Liquid Nails, so I have no doubt that I will not lose the bracket if that is indeed the case. The accompanying photo shows my husband sitting in the shower (he gave us permission) so people will be able to see where the shower head can be placed using this bracket. The patient can easily reach it while seated to relocate it or remove it so that he can wash it. We have found that just this one bracket has made a tremendous difference in In fact, this has given my husband a measure of independence in the shower, since I no longer need to hold the hand shower over his head when.
The lower part of my shower head needed to be able to fit comfortably. My first purchase was one that worked by suction, and I One of the parts comes with adhesive glue, which you leave on overnight. As a result, you cannot take a shower It remains in place once it has been done. This looks better than one that is attached with suction cups and will eventually fall.
The adhesive holds well and is easy to install. It took about 48 hours before I applied painter's tape accross the installed area. I cleaned off the area really well, put the glue in place, and painted over it for 48 hours before it was There is ample space for the shower head to tilt downward, since the seal is strong and holds the weight of the shower head.
My showerhead and soap dispenser were broken so I replaced them A holder that came with it was also terrible and would always break. It seemed like adhesive would be a great option as I don't have the patience to use tools however, i was skeptical about it working as well as it could My mistake has been proven by this product! The site has been up and running for almost three weeks now with no issues.