Probrico Satin Nickel Ball Privacy Knobs Interior Keyless Door Locksets for Bed and Bath, 5 Pack

My home recently had two exterior handles replaced with Kwikset handles without thinking about what kind of latch plate they were using. The Kwikset door handle includes a collar and a latch plate that can be removed for doors without latch plates for better installation on doors of any type. In the Probrico set, however, you do not get collars, and in fact the plates could not be taken off, so you could not remove To do this, I needed to go to Home Depot and buy the door latch installation device as well as do additional To determine whether this set is right for your doors, please check them before buying If the latch (the little piece that goes in and out when you turn the handle) has a rectangular plate around it, then you're all set. The latch should be circular, and not have a rectangular plate around it. A different set of doorknobs should be found if the latch is circular. Pictures (see below).

Jasmine Vega

| Oct 22, 2020

If you have ever used a thumb twist lock, how do you lock it? I thought they were going to be great, but I can't figure out which direction it goes when it is locked. Do you know how to do this? That may seem like a little bit of a picky thing to say, that it's not just like every other one of my life that I've used in the past. It was just something I was going to get used to.

Naya Macias

| Oct 05, 2020

What a hassle. A well-made product in terms of physical quality. There is no misalignment in the alignments. This product comes with squared corners on the plate that need to be chiselled out in order to fit, but this is not a defect or When I bought a pack of 5, I found 3 of them were missing parts. This was a failure on my part. *The same parts as before. To hold the door piece together in the door, the bolts must go through the door plate. You can't find these bolts at your local hardware store because they are not just random bolts with a standard thread pitch. You can understand this by looking at the attached image. I have two doors finished and three piles of useless hardware at this point. The cost is not worth the benefit.

Alessia Dillon

| Dec 25, 2020

According to the listing, “easy installation” is provided In some cases, if you are replacing a Probrico set, then it may be, but in general, most houses constructed by Middle Class homeowners will On the latch and strike plates of Kwicksets, the corners are rounded while on these sets, the corners are squared. If you want a square peg to fit into a round hole, then you have to do something. For the first one, I cut away the corners that were inset. As a result, touch is required Put up the After that, I turned the corners of the two next pieces on the bench grinder. if you have some experience with radius sizing, you can easily do the following If you are handy with a bench grinder, you will be in luck! Though the strike plate (which seemed thinner and less durable than Kwikset) lacked an inset, it would have been easier to chisel, rather than grinding along the long edge, a compromise that was made. I'm in pain! I may have reduced the ADDED time involvement to 15 minutes per set however multiply it by ten to get an average. Does it make sense to buy 15 sets for the sake of a few dollars' savings? They also have a different lock- -as mentioned by another reviewer (1 at the very least) I am more accustomed to a different tab orientation than most sets I have used (including the two outside doors I have not Thumbs up in a vertical direction It is unlocked. It is locked in horizontal. In case you have the habit of locking inside the doors, this could get confusing.

Cali Best

| Oct 18, 2020

I used an Amazon coupon of $5 off to get the cheapest 5 packs I could find. Easily installed, they look nice and are well made. The one I got stuck in the lock position and couldn't find a way out was one of the five. In the end, using a pair of pliers, I was able to force the locking mechanism into its correct position and it worked successfully. The time I spent figuring it out was nearly an hour and I was about to return them all. It is an excellent product overall and I would definitely purchase it again since it is priced right.

Jasiah Robles

| Jun 25, 2021

It is nice to have door levers like this. While the finish is generally nice, one of my levers had a less than satisfactory plating job on one of the handles, which is why I am only giving it a 3 out of 5. I will give it a 5 star rating if it is corrected by the manufacturer. Installation was relatively straightforward, despite the fact that I had to chisel out the space where the latching mechanism goes from the square plate. It is most of the time possible to switch out this lock with most other lock sets, but you will need to modify this one. Here are a few words of wisdom In the event that you are going to install this, you may want to have a hammer and a chisel prepared. On the whole, I'm very pleased with the This item is in excellent mechanical condition and has a nice finish. Even the weight and feel of them are good. For the price, they are a good purchase.

Chanel Costello

| Jan 05, 2021

I love them. I didn't read the instructions very carefully, so I made a mistake). My only recommendation would be to reverse the order of the horizontal/vertical keys. In most thumb locks I have seen, vertical means a lock and horizontal means a key, and vice versa The overall experience was good. I recommend them.

Isaias GODDARD

| Dec 17, 2020

In the locked state, the middle switch on the knob is oriented horizontally, while in the unlocked state, it is oriented vertically. My family has been left confused by this behavior, which has already led to my daughter being locked inside her bedroom and bathroom on several occasions. That was a pity since I couldn't exchange The reason I bought these is that I will probably be replacing them soon, so they are pretty much a waste of money.

Wayne Richard

| Jan 13, 2021