Gorilla Waterproof Patch & Seal Liquid, White, 16 Ounces, (Pack of 1)

The outcome is absolutely stunning. The application was made on window shower tiles to prevent water damage and mold in the shower's window area. The product is thick and sticky, and it comes out of your brush looking like honey. I strongly advise using a good paint brush; don't skimp on the brush or you'll end up with strands coming out of it and into the product; and avoid using a sponge brush. Spreading with a sponge brush is slightly more difficult. Simply paint it with a good paintbrush and throw it away when you're finished. If you're using it on shower tiles, don't apply it to every tile and grout line because the wall needs to breathe out the moisture from the shower through the grout lines to prevent mold from growing behind the tiles. If you choose to use it for shower tiles, be sure to follow the manufacturer's instructions. I would only recommend using it in a small space. That was the window in the shower for me. I chose to start by removing all of the old caulk from the window seams before applying new silicon. I waited 48 hours for that to dry before applying this product on top of it. If you're going to re-do something, you might as well do it right the first time. Because once you cover it with this patch sealer, it's inaccessible afterwards, I recommend using silicon and using a good brand. Please keep in mind that putting this product over old caulk will most likely turn it yellow. It did the same for me on the seams I didn't want to re-sew. silicon. It's not a major issue, but if you want perfection, remove the old caulk/silicon and replace it with high-quality new silicon designed for bathrooms and tubs. br>This product takes a long time to dry. If you put too much on at once, it will drip down slowly; I put a lot on the tiled window sill portion and it gradually dripped over the edge. I had to brush it away with a clean brush on a regular basis until it dried and stopped dripping. Make sure the brush you're using is brand new; don't use one that has dried paint on it. The paint will soften and dissolve in the patch liquid, resulting in a tint of whatever paint was on the brush in the finished product. I waited 24 hours for the first coat to dry (when dry, it feels grippy, not tacky). Is it still obnoxious? Allow more time for it to dry). The second coat went on smoothly, but make sure the inside of the can lid and the area around the opening are completely dry before sealing it again, or it will be difficult to open. To help seal the product for future use, I covered the opening with a small sheet of clear plastic wrap and then covered it with the lid. This product has only been on for two weeks since mid-November 2021, so I'm not sure how well it will hold up in the long run, but it appears to be capable of doing so. The only way to find out is to wait.

Ezra Wallace

| May 28, 2021

I bought the black to be able to see the coverage clearly. By simply pouring the sealer into the fountain, I was able to get a thick coat. br>I rolled it around until the sealer appeared to be completely covered. I let it air dry for a week. I let it cure before putting water in it. There will be no leaks any longer! br>It is undeniably effective.

Joel CARTWRIGHT

| Aug 27, 2021

This applies thickly and isn't particularly long-lasting. I was hoping for something like clear rubber or epoxy to set up, but this feels like crumbly old dry rot rubber. When you touch it, it turns into powder. br>br> I needed to waterproof a small plastic device, so I sanded and cleaned it thoroughly. This product was applied in three coats, each of which was allowed to dry for 24 hours per the instructions. After a few weeks in the sun, it became almost completely opaque. I planned to put it in a shady spot, but the weather turned cloudy before I could finish. Although it may be useful in some situations, it did not work for me.

Millie Carlson

| Oct 24, 2021

This worked perfectly for my project, which involved painting a public mural on long cement benches with acrylic paint. It was generally simple to use and dried completely clear. My main gripe is that I wish the container had a more secure lid, so that I could close it and know it wouldn't leak, and then return to it the next day. I understand that this is not how canisters like this are designed, but I believe it would be a fantastic redesign. I had a big spill in my bag, and it covered a lot of my art supplies! Simply because the can was slightly tipped when it was closed.

Sophie Williamson

| Aug 28, 2021

The product became white and began to peel after a few weeks. I'm not sure why this is referred to as "waterproof"! If it's going to stay wet, don't buy it.

Cayson Gillespie

| Apr 27, 2021

Every time it rained, there was seepage, which caused everything to become blocked. I'm very happy with it.

Serenity Little

| Aug 13, 2021

My bathtub drain had a serious leak. It was a serious leak. I didn't realize that was the issue until the drywall and closet floor were soaked. By chance, I discovered the leak. The drain connection beneath the tub was completely coated. Allow 48 hours for the coating to cure before applying another coat and allowing another 24 hours to cure. So far, the leak has been stopped. I applied it with a paintbrush. Spreading is simple. So far, everything has gone well!.

Oaklee Landry

| Sep 23, 2021

It appears that I need to fix the leak in my gutters. I tried a different, well-known brand, but it didn't peel off.

Virginia Davidson

| Nov 15, 2021