Sabre Tools 4 Inch SDS Plus Floor Scraper Tool, Removes Thinset & Adhesives, Works with SDS-Plus Rotary Hammer (4" x 10")
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The one I have is having a buddy borrow it, so I'm not certain what size they were. I believe There is a slight difference of The bolts are still good, and they have lock washers on them, despite the fact that I put over 30 hours of hard work into it. On the day I added threadlock, I added some zip ties. I haven't had a problem since then. It is a useful tool for removing thin set and other adhesives There is glue on the concrete from the flooring.
Selected User Reviews For Sabre Tools 4 Inch SDS Plus Floor Scraper Tool, Removes Thinset & Adhesives, Works with SDS-Plus Rotary Hammer (4" x 10")
Project completely removing the 16x12 kitchen ceramic tile. The pros include I was satisfied with the performance of this floor scraper. The cons are During the first hour of construction, two bolts had come There appeared to have been some kind of loctite The lock washers were stripped out as I tried to retighten the nuts. Get new washers, locking nuts, and loctite blue at the 1 & L store. There was no change from day 1 to day 2. On Day 2, we went to the mall. At the head of bolt 1, the bolt sheared. The second trip was to the store, where new bolts were purchased. It was only the one that needed replacing since loctite held on the other two. The plate broke near the middle bolt in the middle of the day. This did not affect A second bolt was sheared later in the day. Plate shift blocked the hole that might have been used to put in a new bolt, but I didn't want to remove the loctite on the two bolts that were still in place. We are done with the project. The scraper can be seen in the pics.
Since those mistakes were made, I would have to pull up some tiles that were not prepped properly, or apply the thinset in the wrong place. It wasn't difficult to peel the tile up, but it was difficult trying to clean up the dried thinset. The task of attaching this to an SDS plus rotary hammer on hammer only mode was finished in no time at all. My ability to clean up thinset is so great that I can clean a whole tile's worth in less than Per pass, there is plenty of coverage on this blade thanks to its width of 4 inches. I was pleased to find a lot of blue loctite on the bolts to prevent them from coming off at random (I took one off, just to be sure). You are currently in 8th grade. This is the first time I have used this on more than 40 tiles and haven't encountered any issues yet. I have used this on over 40 tiles so far and haven't encountered a single issue. The pros are This is a placeholder page for Timothy F. Jones, Jr.
Dimensions of the blade are 4 inches
The loctite has been applied to all 3 bolts The rotary hammer has an overall length of 10 inches, which allows you to have it closer to your body. Despite being thick enough to prevent bending/warping, the knife is not particularly durable. This is a placeholder page for Timothy F. Jones, Jr. There are none as of.
In the course of demoing *1300 ft2 of tile at my house, I used this bad boy on my SDS plus rotary hammer. The first thing I did was rent a professional thinset/tile blade from a big box store, but after tightening the bolts three times in an hour, I decided to purchase it through next day delivery. As a result, I was able to remove excess thinset in a short period of time. Bolts did not come loose at all, and chiseling through thinset and scraping up old rolled vinyl flooring did as well. Despite the difficulties of removing thinset without gouging the concrete slab flooring, I was impressed. It was well worth the money!.
In order to cut through thin materials, I used this tool along with a Bosch Bulldog drill The plywood floor should be set off from the wall. I am satisfied with how it worked. Finding that a 45 degree angle performed better than a shallow angle was a revelation. In addition, a light press is better than a heavy one. As well as removing mortar, the blade could remove bricks and blocks smoothly and quickly. If you are removing any type of cement, this might be an option you should consider.
I was able to remove two layers of flooring with the tool and my bosch hammer drill. After trying it, I was skeptical of the brand, but after comparing it to the other names on the market, I think it has.
I liked it a lot. It took almost two hours for the bolts to come The installation of new bolts and nuts was expected, and it appears it is still in good condition after six hours.
Trying to remove tile from direct bond over concrete laid in the 1970s. The scraper worked fine at first, however, the head of the scraper became damaged after use on a 4x7 job. You could possibly touch it up with a grinding stone, but who has time for such an activity day in and It might be helpful to make the scraping area thicker.
To keep the bolts and nuts tight, I had to keep them Despite that, it's made from good quality It is a product I would recommend.
Related Products For Sabre Tools 4 Inch SDS Plus Floor Scraper Tool, Removes Thinset & Adhesives, Works with SDS-Plus Rotary Hammer (4" x 10")
