Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)
Score By Feature
OveReview Final Score
Product Description
Selected User Reviews For Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)
My 1994 craftsman chain drive garage door opener was directly replaced by this kit. It was a direct replacement for the parts in my It was very clear that there were An assembly of gears and sprockets can be easily replaced if one is damaged. It was hard to tell if the bushing on the sprocket was My next step was to grease the shaft after removing the C clip. Lastly, I used the screws as taps to create threads in the three screw holes before assembling. In spite of the fact that the other parts still looked good after 27 years, I used only the gear and sprocket assembly for convenience. In addition, I cleaned all of the nylon gears and used a lot of white lithium grease. The kit is very good value if you are mechanically inclined to replace the broken part. I saved hundreds of dollars and unnecessary waste by spending $20 and some time and effort on this project.
Quite nice. Fits my Craftsman garage door opener perfectly. Great alternative to replacing the whole thing. We had a lot of trouble with the screw over the circuit board. Helpful YouTube videos can be found on the site.
For my ancient garage door opener, it's the complete replacement set of gears, bushings, and pins. Generally, if you're mechanically inclined, it won't be difficult to install them. One thing I don't like about the gears is that they are made from It would cost more if they were made of something like bronze or sintered metal, but they would likely last forever and I would not have to buy them again for a long, long time. Though I'm not happy with the cost and the effort of replacing them, I'm not upset either.
The HP5 is a 2003 model. I would recommend this as a replacement for a LiftMaster. This was a 5 HP 2003 engine where the propeller shaft has worn out and broken after 18 years. For the purpose of replacing the CAM, the whole motor box has to be removed and reinstalled off the rail. A CAM shaft can be replaced with no problem from the motor box.
Bolts are quite special, as you can see. Their slightly tapered shape and notched notch allows them to be threaded independently. This would be a good idea Before the final assembly is completed, an appropriate bolt is inserted into each hole to provide threads. Be disregarded if they claim it will take difficult or difficult tools to drill them.
For fixing the problem, all of the necessary parts are included, but the gear doesn't move easily, causing other parts to wear out I would be pleased if the bearing in the new one spun like the old one.
It was simple to replace the parts after removing the old ones from the garage door opener. The replacement parts were of the very best quality. It was a lot cheaper than going to a restaurant. An opener for a new kind of garage door.