Nutone 97014094 Broan Grille & Lens Part
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
My bathroom fan's lens was damaged in November 2012 and I had to order both the grill and lens in order to replace it. A spring is not present. On each side, the lens has a tab equidistant from its corner (there are only The number is actually only three). Just squeeze the sides of the lens gently in the middle of each side, and it will come loose. You will then be able to remove the light bulb in order to access the wingnut holding the body of the grill together as well as the actual light fixture. The fixture and grill will hang from two wires when the wing nut is removed. When you have separated the grill from the fixture, you may squeeze it a little and then hang it by the The grill should be placed on top of the fixture, and the fixture on its screw with the wing nut before the light bulb is replaced. Last but not least, the lens should be squeezed and reseated.
The answer is yes. Already, the wiring is in place. It's easy to install another device. Just order from Amazon.
My guess is not, but here is one that I found that has your model number #763n in the and has the dimensions that you list. The dimensions of this print are 75.5" x 12". The following measurements are provided in inches I am Broan The NuTone 85315000 Ventilation Fan Grille Lens with Assembly,1, comes with a lens assembly. Approximately 75 inches by 10 inches. The dimensions of this picture are 75 x 12 inches. The size is 25 inches, OFF-RED The lens is included, as is the grille. About this item *br>Which includes the lens and grille. There is only one grille that is available for all models listed, and it does not attach with springs. Models for which this Grille and Lens Assembly fits include A selection of ventilation fan models is available There is a reflector on the grille and the reflector is a part of the VF305CN, VF307CN, VF705RCN, VF707RCN.
I don't believe it will. There is only a plastic screw in the frame, the cover, and the cover. all there is to
Selected User Reviews For Nutone 97014094 Broan Grille & Lens Part
I have a fan and light in my bathroom that is over 30 years old, but the plastic cover has aged and is Over time, it had cracked and gotten yellow. I was unsure what brand it was when I bought it, but it was close enough to this new one to give it a try. As soon as I figured out how to remove the old cover, it was a simple matter of fitting the new one in place. As I mentioned earlier, there is a metal plate that holds the lightbulb, and it was easy to pull the plate through the cover, and then reinstall it. The bulb should be replaced after the plate is put back in place. While the new cover may not be 100% compatible, it keeps its place just fine. As it turned out, the old cover was connected with four screws that weren't compatible with this one, but after it was installed, the cover worked perfectly without the It does not require much force to hold the cover in place because it weighs so little. The bathroom is now much brighter and it costs a very small amount of money to make these changes.
I wanted to cover my existing ceiling fan hole with the cover. Although I was fine with it not being the original brand, I did not know what the brand was. It was going to require rigging up a system to mount it, which I expected. As far as I can tell, the dimensions listed were The paper size is 7 x 11 inches. It measures 8. 5" There is no truth to this. There are 10 in it. The dimensions of the sheet are 5 1/2 x 11 1/4. "125" inches. Due to a hole in my ceiling measuring 11 inches, I must have a hole of that size. The size of the sheet is five by eleven inches There are no good choices for me in 5". This was measured twice by me, but not by the company listing it. Left to my own devices, I have no choice but In the event that the dimensions had been accurate, this would have been a 5 star product.
A yellowed existing one that was 24 years old was replaced with this one. However, the replacement was also light yellow, and because of this, it doesn't seem to match the white bathroom ceiling, and the new one looks outdated.
The new grille and cracked lens were an excellent replacement for my old ones. A new grille was installed with the part number It is a little different in shape, so you may have to touch it up a bit My only complaint is that it needs to be touched up, but I am The old one rattled a lot so this one doesn't. Moreover, the lens on this one fits much better than the old one.
Among my old Broan fans are three that are more than 30 years old. Although I have replaced all the motors, I tried to reuse the covers as the originals were crappy and yellowed with age and It's as simple as that. The boom sounds. The new fans make the bathroom seem brighter and more spacious.
This will replace an old broken one with ease. I was very pleased with the delivery time and quality of the product. If you are going to buy something, you must measure it first.
Remove old lens cover, bulb, and By letting the fixture drop, it will allow the old grill to be removed. Install the new bulb, tighten the cap screw, and replace the bulb with the new one. Replace the cover and snap it You'll have a new looking fixture within 90 seconds.
However, it was the right size and fit, and perfectly replaced the equivalent in my 1990s vintage condo where the light bulb cover had lost its ability to cover the light bulb.
Related Products For Nutone 97014094 Broan Grille & Lens Part
