INNO INA453 Rooftop Cargo Rack Kayak Lifter
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The answer is yes The lifter should be positioned near one of the J-shaped flanges at each end of the automobile A hook. As you lift one end of the kayak up, you will need to extend the arm perpendicular to the van roof. You will need to climb up the other end of the kayak (feet on the running board if needed), and on to the J-shaped platform I am hooked. Once the kayak is in the other J-shaped rack, slip it up off the arm I am hooked. It is a reasonable price for an individual lift onto a high roof, like that of a minivan, at least for one person. An extended arm can be covered with a piece of rubber (like a cheap placemat) While the free end of the kayak is lifted, the mat prevents the kayak from sliding. While it takes some practice, pushing up into the J-shaped position is easy As soon as you learn how it works, you will be fishing with hooks. It is also a good idea to have a clean cloth to drop on the van under the lift in case the kayak bumps the van during manual lifting.
In short, yes. Each and every time we carry our kayaks or put them on the roof of the car, it is used for this purpose. She can even unload them by herself, as long as she takes her time and does not rush through it. After all, she is 5'1" and doesn't weigh more than 110 pounds.
You should be able to fit it The hardware comes with a universal mounting system.
It is not evident on the photos that the product requires cross bars. In that case, I think that cross bars would need to be added to the Subaru roof rack. Following that, it might
Selected User Reviews For INNO INA453 Rooftop Cargo Rack Kayak Lifter
This item is very useful when you're loading up a kayak alone. This item was simple to install, however I had to move J hooks a bit in order to accommodate it. The Perception pro kayak is well built. I am able to load it on top of my Ford Escape a lot more easily alone.
There are many kayak side loaders on the market, but I found this one by accident. I found this to be perfect for my needs.
It was easy to mount to my Rhino racks. In addition to being sturdy and not scratching my kayak, the assist bar is also somewhat light. Almost all of the kayak's weight is on the car, and the assist bar helps to keep it balanced. As a result, I can now side load from my kayak comfortably without being concerned that the kayak will fall Here are a few things I was thinking about I had to mount this product on the inside, meaning I lost a few inches of the assist bar as a result. Since my crossbars are an exact fit, there was no remaining bar for me to mount this product on the outside. An assist bar that is a little longer would be able to resolve this problem. The mat I found also served as an alternative to placing my kayak on the surface of my vehicle to avoid scratching it since the longer bar is not compatible with the initial assist of this product.
Besides that, I'm They can get the same results as a $500 side assist bar for a fraction of the cost.
I was able to load my kayak by myself so much easier. Now, it only takes me 3 minutes to position the device on top of the vehicle and saves me from straining
I added a pool noodle to the metal and also put a blanket on the side in order to prevent my car from getting scratched.
The 14 I had was very heavy, so I needed some help loading it. A 5ft tandem and not scratch the new SUV of my wife (well, not scratch it next time maybe). The method works really well (I put a towel on the side of the car now as well). The kayak is therefore less likely to tip over (and strain my back) when being lifted onto the roof.
Please do not try loading your tandem Hobie Mirage Oasis. In the L created by the rack, I placed the nose of our Oasis. I got into my kayak and began to slide upward, but my arm bent and the kayak slipped off onto the pavement hard. The rack probably works well for single-person kayaks as long as the kayak doesn't weigh too much. Our 83 pounder, however, is too heavy for the.
My Rav4 has a plastic rear spoiler, so loading my Hobie Outback from the rear of the vehicle is not an option. Using the Inno Kayak lifter, you can load the Outback hull from the side onto your vehicle using square or round roof rack bars. The Inno Kayak lifter weighs 75 lbs. The top bar should be extended to form a 90 degree angle, then lift one end of the kayak and place it in a 90 degree Rotate the kayak to front and back positions by lifting the other end of the kayak and slid it along the bottom bar of the lifter on top of the roof rack bars. The top angle bar should be returned to its previous position and re-positioned With the strap mechanism, you can secure your bag. Unload the process in the reverse order. The pros are I. 1. Easily allows one individual to load and unload a 75 pound kayak with no problem. One end of kayak is always supported by a lift or ground bar,* br>2. When kayaks are loaded, the top bar angle helps prevent them from slipping or falling. The side of the vehicle must be free of scratches and the mirrors must not be guillotined. the side of the vehicle when loading or unloading. Four point four. It would be easy to attach the roof rack to/remove the roof rack from. A 6 bar system, allowing you to adjust the spacing between the bars from 27 to 39 inches
5. The materials are excellent quality and the building is solid.
6. The price is relatively inexpensive in comparison to other options such as Thule Hullavator ($500 plus)* * * Cons I. 1. Thieves can easily remove a device with ease if it is attached easily. When not in use, I store it in the back of my vehicle. As a whole Definitely worth checking out. As a person with neck and low back pain, the Inno Rooftop Kayak Lifter makes it easy for me to load and unload my.
Worked pretty well for me. This is using on a Mazda CX5 and I'm able to load a two person kayak that weighs 35kg on my own. In this case, the rack should be placed right at the very end of the car due to its structural requirements. As a kayaker, you've got to be really careful with how you lift and lower the kayak if your roof rack is fitted like mine, where you cannot attach the Inno rack to the extremity. Since this happened, I have already scratched and dented the side of my car. As part of the effort to keep the kayak from getting damaged, I am using a couple of hefty towels on the side of the car.
I use it to load Meyers Sportspal files on my HTV. The side loader keeps your car from sliding backward and is probably the most affordable side loader of its kind.
Related Products For INNO INA453 Rooftop Cargo Rack Kayak Lifter
