SHIMANO SH56 Multi Directional Release SPD Cleat
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The pedal platen is supposed to be included in the package, but they appear to have been removed and are no longer included. In fact, the plates are missing from the package (which isn't cool). FYI. In addition, I bought the SM- The platens were included in SH51, which you can find on Amazon. Furthermore, both pairs of my shoes came with plates installed, but if something was supposed to be included in my purchase, I simply expected it to be.
They're a set of two. All you have to do now is place an order for one.
The SM- SM-56 and SH56 are two different models of the same thing. SH51 cleats are only compatible with two-wheeled vehicles. Shoes with a bolt design, rather than the traditional three-piece design, are available. Although 3 to 2 bolt adapters are available, bolt road shoes are recommended (as some Giro shoes only have three bolt configurations on the bottom).
As far as I can tell, the SH- It's a lot easier to "unplug" from the pedal when you're 56. The SH- The 55 can only disconnect in one direction, while the 56 can disconnect in any direction. However, you should conduct some research to back up my assertion. I'm not an expert on Shimano pedals or clipless pedals.
Selected User Reviews For SHIMANO SH56 Multi Directional Release SPD Cleat
I've been mountain biking for thirty years and had never tried clipless pedals. I had both knees injured as a kid, and the idea of being clipped in and having to move my ankle sideways to get out didn't appeal to me, so I've always ridden with toe cages. br>br>I recently completed a three-day mountain biking race, and it would have been foolish to attempt it with cages, so I decided to learn clipless for the first time. These SH-br>br>SH-br>SH-br>SH-br>SH-br>SH- You can unclip yourself from the clips in both directions, as well as by twisting out diagonally--56 clips were perfect. not just in the flat plane, but also up and down. The SH- 51 clips can only be released in one direction at a time. These are the ones to go with if you're new to clipless. br>br>I put these on and set my pedals to the loosest setting possible, and they worked perfectly.
The SP51 that came with the pedals has been put to good use. I decided to give these a try after falling over once, in traffic no less. The SP56 cleats are much easier to release for me. My pedals are set to the smallest amount of resistance possible. Despite this, there's plenty of float without releasing (more than the SP51), and pulling up on the pedals isn't a problem. When pulling up when climbing hills, the pedals did not release. I use these on my road bike rather than my mountain bike because I wanted bike shoes that would allow me to walk without looking like a duck. br>br>Even though this is a multi-way clip, I still only unclip one way: by turning the heel outward. cleat to be released But with the SP56 cleats, it's a lot faster, and I feel a lot safer knowing that I can unclip quickly. It's still not as safe as flat pedals, but if you want to stay connected to your bike, this is the way to go. br>br>I strongly advise anyone who isn't an elite competitor, and especially those who are just getting started with clipless, to get these.
These are fantastic cleats for those of us who don't consider ourselves to be professionals! Those who need to pat themselves on the back for using sh-cleats call them beginner cleats. 51's. These are ideal for cross-country riding where you may need to quickly exit the clips. They're simple to clip in and out of, and they come out at various angles. They have no effect on the pulling function, but if you want more security, tighten the pedal adjustment screw to make it more difficult to release. I've used clips before and find these to be ideal; oh, and don't feel compelled to call me a beginner. I don't know what to say.
These are not only not genuine copies of the original product, but they are also not particularly good copies. It's not steel that's being used. Maybe it's some of the softer nickel? As soon as you open the package, it's clear they're low-cost. Look at the original Shimano steel cleat that came with the XT pedals; the soft metal in our pedal will be chewed up in no time. Spend an extra ten dollars to get the genuine article. It is less expensive than crashing and paying for a hospital visit if these fail.
The age- question from the past: Why do you refer to 'clip-in' pedals as 'clip-in' pedals? less': Oh Hum. br>br>Remember when you were four years old and tried to ride a bike for the first time? You had 'training wheels' to assist you until you developed your sense of balance. br>After that, you removed them and went 'hell bent for leather'! br>br>Now that you've decided to learn how to use clip-art, it's time to get started. You can use these SPD (model SH56) cleats to reduce the number of pedals you use. With a simple twitch of the foot, you can create a clip. br>br>Use these for about a minute. 2 weeks until you're used to mounting and unmounting mounting using the pedals as a starting point br>br>Until then, they can be gradually tightened using the SPD pedal tension to make them more difficult to un-tighten. clip (until you've mastered the art of being a true bike jock). br>br>Aside from that, they're only $20 for the security of learning curve protection. br>br>For bicyclists who are "new" to clip-ins, I highly recommend the Shimano SPD Clip. The number of pedals has decreased.
These are absolutely necessary. On my mountain bike, I recently switched to clip-ins and discovered that old habits die hard: I had trouble unclipping when making fast, sharp turns or stopping suddenly. clipping too quickly, resulting in a fall It was a huge improvement switching to these. It's a simple process to get in and out of the house. You could walk right out with any turn of the foot. However, on the uphill climbs, where these are especially useful, I stayed clipped in and was able to pull up for added power. My feet did come out a few times on jumps, but that's because I'm still using the old cleats and running my pedals very loose. The next time I go out, I'll tighten up and try again. But I have no regrets about opting for clip-ins with these. When I get better, I'll probably go back to my originals, but if tightening up the pedals fixes the issue on jumps, that'll be great. Not likely.
I agree with the person who stated that these things are essentially mind reading. Those new to clipless should look no further than a Shimano pedal with adjustable release tension if they're serious about going clipless. br>br>At low tension, these WILL unclip in a jumble with XT pedals (the ones with the tiny metal platforms). Even a strong straight-up pull to throw your leg out and catch yourself will result in an "unintentional" (but very welcome) release. Only once have I been knocked down: getting stuck in relatively level rock gardens, where I didn't have the clearance to unclip normally, nor the inertia and/or panic to make the aforementioned 'psychic release. ' 'br>br>I've had a couple of unplanned hard rock strikes, which, again, goes with the 'psychic' vibe, as if the cleats were just saying, 'hey, that could've wrecked you, here's a foot if you need it. ' ' LOL. I simply reattach my clip and continue to pedal. I don't think this would be an issue at higher tensions. br>br>The Shimano cleats are better at holding you in, but the float isn't as good, the release isn't as fluid, and I'd be more concerned about not releasing in a wreck. You'll also miss out on one of my favorite recent MTB moments: In a turn, I lost grip, kicked out a foot and moto'd, then clipped back in flawlessly. Without even giving it a second thought. That took my breath away as a newer clipless rider.