Feedback Sports Ultralight Bike Repair Stand (Red)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The seat post may be clamped as long as there is a four-inch distance between the top tube and the seat post. For my own bikes, I can ride them, but not for There are only three inches between the top tub and the bottom of the seat clamp on her bike. A small clamp that rotates easily and quickly from one position to another is just under four inches wide and can be rotated from any angle.
There is a label on the box that reads "made in Taiwan.". You may be asking because you want to get an indication of quality, and this product is constructed really well.
"Holes on both sides have a maximum load capacity of 85 lbs (39kg) so it can be used with most road, cyclocross, mountain bikes, and electric bikes," and other reviews have said it holds ebikes that weigh more
A friend of mine has a red ultralight stand and it works great. It opens pretty wide and holds the Trek Fuel 8 easily. I am trying to upload a picture of that, but I cannot figure out how to do it.
Selected User Reviews For Feedback Sports Ultralight Bike Repair Stand (Red)
If I were to buy this instead of I am 9 and I am I will share my thoughts here. The following is feedback from The following - The cost of 170 dollars is approximately $10. The product weighs 6 pounds and is made in Taiwan-- Tabs on the extension tubes can be released quickly and easily - I believe it to be quite solid and sturdy, the tubes are much thicker and bigger than the picture suggests. I think that the connector is plastic, but it still feels solid.
Park Tool PCS-The clamp mechanism is solid, the connector is plastic. The following - It weighs approximately 23 lbs, costs approximately 140 dollars, and is made in China - A quick release is not available on extension tubes. - Park Tool PCS - heavier, more difficult to operate, more difficult to set up and disassemble
The following - This product weighs approximately 25 pounds and is made in China* The extension tubes have a quick release feature-- A heavier weight
In summary, for the price, it is lighter and better than park tool PCS-11, which is similar in price but has a small plastic clamp arm. Even if you spend even more money, you can get a high-quality stand, but as a hobbyist who works on occasion, I use this for my needs. The Park Tool HBH-80 continues to be highly recommended This bar holder has two handles. The front wheel must be easily accessible so that you can use it. Hopefully it will be safe to use for many years to come. I will have to update as I use it over time.
It is beautifully crafted and designed using high quality materials - I believe one or more of the people who designed this stand are actually bike mechanics. These were the features I wanted in a bike repair stand (i) ultra-wide (ii) look cool (iii) simple to use A portable device It is not that I expect to be moving it around, but I did want it to be able to be folded up easily and quickly so that it takes up almost no space. More than that, since it would be in our garage, it had to be so easy to set up and take down that I could do it every time I needed In addition, the package should be very light, perhaps less than In addition, the quality of the work should be of the highest standard I mean that it is sturdy and will hold any bike I have without causing damage. As a result, there are actually much cheaper bike repair stands (BRS) to be found, but none of them meet the conditions for entry. I am pleased with the Feedback Sports system, as it does everything I expected A portable device Within 60 seconds, the entire unit can be collapsed into a single cylinder. The cylinder will not rise higher than 1 metre (when folded, it looks like the portable tripods that professional photographers carry with them in their backpacks) (two quick steps, actually) Those that open and close) The rig can also be set up within the same amount of time. A second feature of this product is that it weighs 11 pounds - Despite its function, this is an ultralight device. Thirdly, it appears to be more or less the same as the one I see at my local Once it's set up, it doesn't look like a "home" computer set up The video looks like it could be a commercial Rig used in grades. It weighs just a little over 12 kg (27 pounds) when it is the heaviest As per the specs for this unit, it can hold bikes up to 85 pounds, so any bike I intend to place on this will be well below the limit.
Having read numerous reviews about Bike Repair stands, I decided to buy Feedback Sports Pro-A stand in order to do some tough work on the bike There are many different bike repair stands on the market, but this one is one of the most portable, rotatable 350 degree bike repair stands (10lbs). It is possible to use it on multiple surfaces and it is made of aluminum, so it is unlikely to rust when I wash my bike on it. There is no doubt about any of these things. My pedal bounced against the horizontal red post when I was spinning the drive train at first, thinking I had made a mistake purchasing this repair stand. In my correspondence with Feedback Sports, I was lucky to get in touch with Sammy who was funny, helpful, and friendly. When the arm is at 6 on the stand, it appears that the black arm of the stand can swing horizontally outward Now the pedals do not hit the bike stand when I spin the drive train, so I have no problem spinning it. I'd like to thank Sammy at Feedback Sports for his patience!.
I was surprised by its high quality for the price. It is sturdy, though the light weight means it can be a bit tippy with heavier bikes, but at the same time the light weight makes moving it around easy. As well as my hard tail, I've used it with my full-size boat The shocks were so well made that I have used them on 16" and 20" mountain bikes as well as kids bikes. It doesn't get any better than this stand for the price.
I feel wobbly using this stand, and it even wants to tilt as I hold a 27-inch television. This is my only mountain bike with a 5-speed gearing system, which makes me nervous. Overall, the quality of construction appears good, with the spinner knob being made of plastic, which I worry about, and you really need to crank it down to get the bike Generally, the stand is OK, but I would be concerned about its stability with heavier bikes because of the quick release tubes. As far as the stand itself is concerned, it appears good.
It is worth it to have more light. You should check out the stand! It is convenient for me to put it in the back of my car and pull it out at the end of my ride to clean my bike and leave it there before I put it back in. In the garage of my house, I also store my bike in it. It would be better to get the light aluminum.
The bikes work The item is very well made and transports and sets up easily. I was surprised to find this to be so lightweight and easy to carry. I like this much better than I liked the made-up version Prior to the purchase of this stand, I purchased another China stand that was okay, but nowhere near as good as this one. The price was well worth it.
Exceptional bike repair stand. A bicycle stand made with quality components that is both light and strong. The software is easy to use and to set up. As part of the multidisciplinary The head clamp allows you to adjust the angle of the head to fit any size seat post or tube. My bike rack is holding my 30lb Niner RIP 9 mountain bike perfectly, it is as solid as a rock. The tool tray and the tool box came together and I am very happy with them. Besides enjoying the quality of this rack, I am going to order the storage rack system (Velo Cache) so that I can show off my mountain bike to all my friends! * Definitely Despite looking at many stands, including the popular "blue" brand, nothing comes close to this in terms of looks or functionality. You can get one if you don't have one - This is a decision you will not regret!.
Related Products For Feedback Sports Ultralight Bike Repair Stand (Red)
