AMERICAN HUNTER Leg Adapter Kit for 350 Pound Feeder, Black
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
These are simply adapters that you attach to your container with bolts. To make the legs, you'll need pipe or tubing with an inside diameter of at least 1 inch. I used three of them, each measuring seven feet in length. With the adapters bolted to the center of a 55 gallon drum, I was able to raise the bottom of my barrel to about eye level. drum.
45 minutes or less Because there are so many feeders on the deer lease, it's impossible to measure. Very powerful. It was well worth the money.
A leg kit is what you're looking for. I personally buy 15' sections of chain link fence top rail and cut them in half at the hardware store. Alternatively, depending on how high you want the feeder to be, you can use the larger chain link 8' post.
They don't have any feet attached to them. I made the legs out of 1 1/4" black steel pipe and anchored them to the ground with T posts to prevent hogs from trumping over the feeder.
Selected User Reviews For AMERICAN HUNTER Leg Adapter Kit for 350 Pound Feeder, Black
br>The kit includes sturdy thick tube and reinforcing plates to go inside the drum to prevent deformation under the weight of a full feeder. This is a nice addition. br>The tubing is just a smidgeon too small to fit snugly inside the 1 3/8 chain link top fence rail that most people use for deer feeder legs, making the feeder difficult to move (legs fall off when you pick it up) and potentially kinking the tubing. I attached a photo to demonstrate what I'm talking about, and I deducted one star. br>br>This is a far more durable setup than the kinked conduit legs of the American Hunter 55 gallon feeder, which retails for $139 on sale at Dicks Sporting Goods. With a $30 barrel, $15 for three 5' top rails, a $10 water heater pan for a lid, $40 for a pro moultrie timer feeder unit, and $20 for this kit, you've got a much nicer, sturdier feeder all around for $30 less, and no fabrication required. br>br>Here's a clever way to mark your leg mounting locations: br>Measure the width of your barrel by drawing a line across the bottom. This is your barrel's diameter. Divide it in half and mark your barrel center line, then divide it in half again and mark (a quarter of the way across your first line). Make a second line that extends to the edge of the barrel using a builders square or T square at a right angle to the first. Two of your mounting locations are where that line meets the barrel edge. The third line is on the other side of your first, which is a clever trick. I marked my vertical mounting locations with a builders square off the bottom of the barrel. For you visual learners, I've included a picture.
Every time I try to purchase something similar on Amazon, the quality always disappoints me. I should have known better by now and paid more attention to the description! I used to buy 1 1/2 inch square tubing feeder leg brackets from local businesses. This tubing is 3/4 inch in diameter. When I read the description again, it says they're 7/8 inch, but they're not even that big. They measure 3/4 inch in diameter. I don't have any durability data yet, but the first time a large hog smacks one of the legs, I'm not holding my breath. These brackets are so small that you can't even put proper legs on them.
These were purchased to repair a 35-year-old vehicle. feeder for a gallon I have a barrel band with round pieces that the legs fit inside, and one of the welds on that side of the band broke, causing the leg on that side to dent. This kit's square tubing fits snugly inside the legs of my 225-pound feeder (35-pound feeder). gal). So far, everything appears to be in order. If you're going to use these with a 55-inch screen, make sure you have a 55-inch screen. I'd use a metal rather than a plastic gallon drum for this. In direct sunlight, the plastic becomes brittle and tears at the metal legs. I'm going to re-use the metal barrel band for my rebuild, so it should be plenty strong.
Mounting legs to a 55 gallon drum is not an awesome setup. I've tried them all over the years, and if a cow has its heart set on toppling your feeder, it will. When it comes to strength, all methods leave something to be desired. This isn't the case. I will t- To make these more stable, secure the legs to the ground and add some cross bracing. In the end, it's just a way to attach some legs to a feeder barrel. They're not particularly robust, but they're simple to set up and, once properly configured, I believe they'll suffice.
There were some delivery issues. Instead of contacting Amazon, I contacted the seller, who quickly dispatched a replacement. I would strongly advise everyone to use it. The quality of the let kit is very good. This is my third set, the first two of which were used to make gravity feeders out of a 55 gallon plastic barrel. They hold 400 pounds of corn and I've had no issues with them. As I previously stated, this is a fantastic price for excellent leg equipment. Thank you so much for your excellent customer service.
For my hopper, I tried one last year with a 31 gallon galvanized trash can. It was an excellent solution. Installing it was a breeze. Lower Alabama's wind and other factors have caused it to be held up. I recently installed a second set, and I plan to purchase a third set later this summer. br>Recent changes: It took two years and two sets to complete this project. It's still going strong. There are no signs of rust. To get the length I want, I slide on pipes. Galvanized trash cans are more durable and hold more garbage than most commercial hoppers. RECOMMENDED WITHOUT HEsitation.
Because I needed to purchase extension poles, I gave it four stars. I would have known that if I had read the reviews, but I did not. Poles were only $4 each at Lowe's. They are galvanized and strong chain link fence posts with a 1 5/8" diameter and an 8' length. They work great after I cut them down to 6'.
I bought two sets of these to make deer feeders out of 55 gallon metal drums. I've bought and used other leg kits before, and this one appears to be a good alternative. The real test will come after I fill the deer feeder drum with corn and put it to the test over the next few months, but so far it's working well.
Related Products For AMERICAN HUNTER Leg Adapter Kit for 350 Pound Feeder, Black
