Fish Mate P7000 Pond Fish Feeder
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you look at the internet, you'll see that there are a lot of people line-by-line instructions 3 teaspoons, I believe, is the minimum setting. Mine is for my cat, which is what I use it for. He has a stomach ailment and can only eat small amounts of food at a time without becoming ill. When I'm gone, I leave mine on that setting and set it to feed him every three hours between 6 a.m. and 9 p.m., and it works perfectly. For the past four years, I've been using it. I'm still on the first set of batteries after 5 months, and the machine is working perfectly.
The feeder is set to feed at specific times each day; however, it can be turned off every other day to skip meals. Please call us at 800 725 4333 if you have any additional questions.
The display will flash while the unit is being programmed; once it has been programmed properly, the display should stop flashing. It will, however, flash if the feeding mechanism becomes clogged and the system is unable to automatically clear the jam. Please call us toll-free at 800 725 4333 if you require any additional assistance.
It is not in my possession outside. I'm using it for my dog, who is obsessed with food and requires smaller, more frequent meals. If you could build a swing for it that would allow it to sit on a platform, that would be ideal. I don't think it'll be able to hang from the rafters. I don't believe it would be harmed by the rain any more than it would be harmed by any other factor. Because it's made of plastic, it'll last a long time.
Selected User Reviews For Fish Mate P7000 Pond Fish Feeder
We purchased this feeder to keep our Koi fed while we were away on vacation. We live in the country and have no neighbors who could come up to us on a regular basis. We filled the feeder with food and set it to feed once a day for two months before leaving. The feeder was in perfect working order! It was nearly empty when we returned home. I did put it in a 5-gallon bucket. I made a hole in the side for the spout to stick out and hung it six feet above the center of the pond using a bucket with a couple of small drain holes in the bottom and a gooseneck vent in the lid. The racoons tried everything they could to get at it, knocking several plants into the pond and damaging the top vent, but it managed to stay alive. We couldn't be more pleased. I owe several other reviewers thanks for pointing out issues they had encountered; it was their suggestions that helped me design my bucket.
I can understand why the reviews have so many negative comments. Thank you for sharing your thoughts on how to protect the cover from rain and other inclement weather. I made one for my feeder as well. The materials were purchased from Walmart and the total cost was approximately $12. br>Bucket $ 2. Lid $ 1. 58br> Plastic Faucet Elbow 17br>Plastic Faucet Elbow $4 79br>Silicon is $3 per pound. 00br>I used silicone to glue the faucet elbow in place after drilling four holes in the bottom of the bucket for air/water vents and one top hole on the lid. One hole in the side of the bucket for the spout to protrude through. The purpose of the air vents is to prevent moisture and water vapor from building up. Then I used tape to close the gap in the side hole. Thank you for sharing such wonderful ideas once again. Does it appear to be ghetto? Perhaps, but I prefer to do things on my own. As a result, I'm fine with this cover concept.
To program it, you must stick to the directions. You begin by setting the timer, then proceed to set up to three feedings per day, each with a specific amount of food. You should go through the calibration process to see how much food is dispensed at level 10, then adjust for the number of fish and pond size you have. We have three Koi and have reduced our original estimates due to a large amount of uneaten food found in the pond. br>br>The most difficult part for us was finding a location for the feeder that would allow it to dispense into the pond while remaining safe from the raccoons and other animals that sneak into our backyard from the woods behind our fence. Thankfully, several people have shared their solutions on Amazon, and I want to express my gratitude to them for doing so. The bucket idea for protecting the feeder from the sun, rain, and pests was particularly appealing to us. Our cat litter buckets worked great, and they have a handle to hang them by. We had a pole from an old bug-out bag that we could use. So far, we've had good luck with the zapper. We like this setup so much that we're considering using it full-time rather than just on vacation. I'd like to be able to position it over the pond with more flexibility, but that may require a little more work. br>br>After using it for a while, we've discovered that it doesn't last nearly a week if you only feed it once a day on the lowest setting. It could be the raccoons, I'm not sure. They've been seen sticking their paws up the spout, presumably to get more fish food. We had been gone for a week, and when we returned, it was completely empty. We'll have to either keep it out of the raccoons' reach or find a mesh to cover the spout to keep their paws out. It's still good, but it could be better.
The feeder is functional and does its job well. It is, however, only moderately durable for outdoor use. It reminds me of the Tupperware containers that I'm used to seeing. I built a bucket housing for it, based on the advice of other reviewers. It becomes a lot more practical as a result of this. I wish there was a competitive feeder on the market. This unit is exorbitantly priced for what it is, owing to the lack of competition. A robust outdoor version that didn't necessitate the use of a home was created. It would be worthwhile to invest in custom upgrades.
The Fish Mate P7000 Pond Fish Feeder does not meet my expectations. I've had this product for a little over a year and have had to return it once during that time. It has now stopped working for the second time in just over a year. The P7000 has a sleek design, a simple user interface (when it works), and a large capacity for food storage. It, however, is prone to failure. This feeder is used in a covered area for an outdoor pond. The P7000 is housed in a special feeder box that keeps it out of the rain and away from racoons. br>I'm not sure I'll ever buy another Fish Mate product. In general, the electronics must be perfected. For outdoor use, the electronics must be ruggedized. The digital systems have ceased to function. The buttons stop working when you replace the battery. This product is a waste of money, and it will only disappoint you in the long run.
Although the product appeared to be well built, and was constructed of a very firm plastic, I decided to test it before leaving it with my fish after programming and setting it up. The dispenser system appears to be in good working order. during the first two feedings The screen then freezes, and the device becomes unusable. I initially mistook it for a glitch, but after four resets, the problem persists, and I will be returning it.
The first feeder top only screwed slightly into the top and was easily lifted by animals like racoons. This is our second Pond Fish Feeder of the same brand. I used heavy-duty tape to seal it. The display's digital buttons were broken, and programming the feeder was difficult. It's an odd design to have screw anchors to attach to a solid object like a board, only to have to disassemble the entire feeder to replace the C batteries when they run out. Aside from those flaws, the feeder does its job well, and you can rest assured that your pond fish will be fed on a regular basis while you are away. I looked into other feeders but couldn't come up with anything better, so I decided to give this one another shot. br>br>Because the feeder isn't waterproof, I covered it with a plastic shower cap and a tray to keep the rain off. I'm hoping that the new top clips on this new feeder will prevent the animals from opening it and eating all of the fish food.
Related Products For Fish Mate P7000 Pond Fish Feeder
