Classic Accessories StormPro Waterproof Heavy-Duty Snow Thrower Cover
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Item 52- 228- 011001- The EC is designed to fit most two-person vehicles. br>Stage Snow Throwers Dimensions are as follows: br>47" Length at Hembr>31" Width at Frontbr>24" Width at Backbr>37" Height at Frontbr>40" Height at Backbr>47" Length at Hembr>31" Width at Frontbr>24" Width at Backbr>37" Height at Frontbr>40" Height at Backbr>37" Height at Frontbr>40" Height at Backbr
Thank you for inquiring,br>br>Hello,br>br>Thank you for inquiring! Measuring your snow thrower and comparing it to our fit claims is the best way to ensure a good fit. Just below the large photo, we have a handy measuring guide that shows a silhouette image of the thrower under the cover as well as the places to measure. To get a better view of the images, move your mouse over them and then click on this guide. The StormPro Snow Thrower Cover is made to fit most two-person snow throwers. stage snow throwers (front): 47"L x 31"W x 37"H; (back): 24"W x 40"H.
This is a one-time deal. one-size-fits-all The whole thing is covered. I'm running it on a John Deere 32" wheeled blower, but there's plenty of room in the wheel area for tracks. It should fit your Honda blower with tracks, in my opinion. It's a very sturdy cover, and I like mine a lot.
It fits my Craftsman 24" snowblower, but I can't speak for a 30" snowblower.
Selected User Reviews For Classic Accessories StormPro Waterproof Heavy-Duty Snow Thrower Cover
This was purchased to cover my 24" Ariel's snow blower because it appears to be more durable than the box store brands. When I received the product, it appeared to be much more durable than the previous one I had. However, getting it on and covering the entire snow blower was a challenge. It took me a few attempts to cover the majority of it; the opening is smaller than I expected, so I had to wrestle it into place. It would have been a much better design if it had been designed to drape over the entire unit and be held in place by a couple of tie downs.
Rarely do I come across a product that exceeds my expectations, and this is one of them. It deserves a review! Exceptionally long-lasting. br>br> The seams are properly stitched, and the fabric is made to last. last. br>br>EASY TO REMOVE AND APPLY. With a bulky cover like this, it can be frustrating for one person to have to struggle to put it back on after you remove it. Especially when it's 10 degrees outside and your hands are cold. That is not the case with this one. It has a small tab on the front that shows you the front so you can line it up correctly the first time. br>br>STAYS ON in strong winds. The straps and clips are simple to use, and the elastic would hold it in place even if the straps were not present. It tucks itself in at the edges to keep snow and moisture out once you've placed it where you want it. It was a perfect fit for my Troybilt 2410 Two Stage Snowblower. This purchase was a good buy. I'm afraid I won't be able to speak about it for a long time. However, based on the quality, I believe it will last for a long time.
Fits snugly on the 30" Ariens Deluxe 30, and the cover is tight and does not extend all the way down; however, it is still usable, albeit a little short, and you must stretch every inch of it out. The cover is made of a high-quality, heavy-duty fabric.
Due to the fact that it is made in China, it is overpriced! It has a heavy-duty construction, a durable feel to the material, is well-marked on the inside for easy installation, and it perfectly fits my Ahriens 30 inch snow blower. It's a shame that it's "designed in the United States, but manufactured in China. " " This contributes to the trade deficit and intellectual property theft.
Material that is moderately heavy. I'm hoping this means you'll be around for a long time. Upper vents, lower snap lock strap, and reflective material are just a few of the nice features. br>However, one flaw is that it *really* needs more material to be a worthwhile cover. br>It requires material in the following places:
- At the bottom, there is a foot of material.
- In the front, there's a foot more of material.
- From side to side, add another six inches. side - front blower/auger housing assemblies ranging in size from 27" to 32"
- On the top, where pointed parts such as handle levers, chutes, and other pointed parts are located, extra material is added for thickness and durability. It's just a tad too tight right now. br>br> If you offered those features, I'd be willing to pay a premium for them. br>Fit it to a John Deere TRS 32 (not too snugly) and you've got yourself a winner.
Great construction, heavy duty. Fits my Troybilt exactly as shown in the picture. Now that it's mid-winter, this cover has done an excellent job of keeping snow, rain, pine needles, and dirt off of my snowblower. I don't use the bottom strap because I don't believe the cover will be blown off in the weather we have here in the Southern California mountains. Waterproofing is effective, and my machine remains dry at all times. After using the blower, the vents near the handles are a nice feature that allows moisture to escape from beneath the cover. It also does a good job of hiding my snowblower from view from the street. Once you know where to start, it's simple to put them on and take them off, and the heavy-duty elastic ensures a secure fit. This cover appeals to me so much that I'm considering purchasing one as a present for a friend.
This cover will fit my Husqvarna 30" 2-cycle mower. Snowthrower is a fantastic stage prop. I like how the cover has a strap with a buckle to keep it from blowing away in the wind. The vent hole is also fantastic. The quality of the construction is comparable to, if not superior to, that of the covers sold by the major snowthrower manufacturers. Outside, this is probably the best cover for your snowthrower.
Related Products For Classic Accessories StormPro Waterproof Heavy-Duty Snow Thrower Cover
