Orbit Battery Operated Sprinkler Timer with Valve (57860)

Separate purchases are recommended. Threaded inlets come standard on this valve. To connect to regular 1" pvc pipe, you'll need two Orbit 57191 Slip Manifold Transition Adapters and two Orbit Sprinkler System Valve Manifold Swivel Adapters, as well as a manual shutoff valve in case the solenoid needs to be replaced in the future. br>br>I had a hard time deciding which adapters to buy, so hopefully this information will be useful to others. On the threads, I used PTFE (Teflon). Everything went smoothly!

.

Riley Caldwell

| Sep 10, 2021

I spoke with Orbit about using their (compact) manifold valve system with this battery-operated timer. They said I could buy the manifold valves, but I'd have to replace the solenoids with their DC (red and black wire) solenoids. I'd also need solenoid adapters from their commercial company, HYDRO-TECH, in order for this to work. RAIN. The Hydro-electric System According to Orbit, the part number for rain is 04023 They did, however, send me a couple of solenoid adapters as well as a DC solenoid for free. I put everything together and it works perfectly; there are no hassles and great service. I had planned to mount the timer in an electrical box, but since it is water resistant and designed to live in a valve box, I just decided to throw it in with the valves. I hope this has been of assistance. If you have any questions, please contact Orbit.

Salem Drake

| Jan 29, 2021

I recently bought this device in the hopes of saving money on the cost of powering my valve box (1 acre lawn). I set the timer to run on the "A" program after installing it. I programmed it to cycle through three stations in 30 minutes, starting with a 5:1 ratio. At 5 p. m. , Station 1 begins: Station 2 begins at 5 p. m. on 15: Station 3 begins at 6 p. m. , and station 45 begins at 45 p. m. Station 3 completes the cycle, which it repeats twice more before coming to a halt. I've reset the timer and tried again, but I'm still getting the same results. br>Does anyone have any opinions on this?.

Reid Ingram

| May 19, 2021

I should've realized this wasn't going to work before I even planted it. It's built like a meal toy for kids. br>br>Installed in a small townhouse yard as a single valve for 15 heads. This clock, however, never worked reliably despite countless hours of reading, trial, and error. The valve does not fail when it is closed. I was afraid that any programming I did would cause the system to run indefinitely, so I couldn't trust any of the programming I did. br>br>Until I replaced it with a new valve and traditional clock, which worked perfectly the first time, I thought I was going insane. This is one of the worst things I've bought on Amazon in a long time.

Eliel PARRY

| Jun 06, 2021

Pros: If you've ever installed or used a traditional sprinkler controller, the programming of this device will be familiar and straightforward. After 3 months of service, during which time the ground control box where it was installed was flooded for a few days - it still works well. This is a testament to the device's enclosure's engineering. We're still waiting to see if the batteries can withstand a six-month sprinkler season. br>br>Cons - If you're looking for a unique way to express yourself, this is the place to be. There were no moisture sensors or solar power accessories that could be identified. There is no solenoid extension cable to allow the controller to be moved out of the ground box and mounted on a post (for easy control access - It's inconvenient to pop open ground boxes). I'm hoping to see more of these accessories and recommendations in the near future.

Rafael McClure

| Apr 10, 2021

On my property, I have four of these valve controllers, and I intend to add a fifth valve to one of them. For a few months now, they've been running without a hitch. They address a significant issue, as running wires to these locations is far too difficult to justify. The only minor detail I would change is the flimsy design of the support bracket that holds the valve in place. These are well-sealed, and I appreciate the ability to remove the controller unit from the housing for servicing and setting. In sunny areas, I've added an IKEA wooden box over the valve unit, which allows me to turn the box over on top of the valve and pipes and remove the top of the box (which is normally the bottom). This shields the unit and the pipes from direct sunlight, which would otherwise deteriorate. In that case, I won't use the bracket and will instead lower the controller housing in the wooden box. br>br>NEW ADDITIONAL INFORMATION - After a year of use, I've discovered that the sealed case will not survive a winter in the yard without being protected from the elements, and the lower half of the box will fill with water, destroying the valve's switches. During the winter, I'll be removing these from their remote locations and storing them in a dry location. I have a lot of trouble with the electronic switches in the base. br>br>NEW ADDITIONAL INFORMATION - One timer keeps going off, so I've had to take it out of service; the valve is still fine, but the electronics are the only thing I need to replace right now. There appears to be a flaw in the programming!.

Quinn Soto

| Sep 17, 2021

This is a fantastic device. I have some valves that are 200 feet away from the power source, and I didn't want to run wire that far. The programming is simple, and everything is well thought out, so I was able to run the valves without having to install another controller and run wires across the yard. It uses three standard AA batteries and has a good seal. The drawback is as follows: There are no plugs for additional valves, and there is no solar panel to keep the batteries charged at this time. I purchased latching solenoids for Rainbird valves, but I also needed to purchase an Orbit solenoid to remove the plug. If Orbit is listening, consider selling it separately with separate plugs as an option. Let's also figure out how to deal with solar.

Jadiel Hayden

| May 15, 2021