HQMPC Garden Hose Connector 90 Degree Brass Garden Hose Elbow Solid Brass Adapter (2Pcs)+ Extra 4 Pressure Washers
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The product does not come from China!
The inside diameter of the hose is the same as the hose itself, so there is no restriction to the flow of water.
In short, yes.
Hoses with a diameter of 5/8" have 3/4" fittings to suit.
Selected User Reviews For HQMPC Garden Hose Connector 90 Degree Brass Garden Hose Elbow Solid Brass Adapter (2Pcs)+ Extra 4 Pressure Washers
There is a crimp that restricts the diameter of the hose when the faucet is connected to the ground, and it is located less than 6" off the ground. Now that I have these connectors installed, which almost made connecting a garden hose as difficult as it was before because the faucet was in such a difficult place, I am able to connect a hose much more easily. In addition, there was a leak at the connection before due to the way the hose was attached, but now that problem no longer exists. Even though it is still a little challenging to connect and disconnect the hose because the faucet is so close to the ground, it is much easier than before the connectors were installed. The product is excellent, and the design is great.
With these hose clamps you will find a solid machined flange that hold the threaded ring on and also provides a flat seal surface for the rubber In the internal passage at the turn, I thought the rough surfaces might restrict flow, but I was pleasantly surprised to find that the flow was much greater than the ones I replaced (made My I measures 1 inch in diameter and I use them on it. The connection between the stock tank fill pipes and the freeze-resistant hoses Hydrogen hydrant that's leakproof. I have used them quite a bit, and they have worked well.
As I have several drip irrigation lines, I like to connect elbow hose connectors to them so that I can easily hook up my garden hose without disturbing them too much or not I have not experienced any leaks as long as I thread the garden hose properly. Due to my limited budget, I appreciated the value of two adapters for the price of one when compared to The fit within a tight budget and work well.
It really helps to have hammer arrestors in place during timer shutdowns to absorb the shock of abrupt shutoffs. There is a 90-degree difference, but they make up for it It's difficult to negotiate the degree turn (and is difficult to describe, I must admit. In any case, these were easy to connect, so I'll mention them here. The rotating female ends have the two flanges sticking out, they are machined accurately, sealed without a I don't think Better Homes and Gardens will be doing a feature on my gardening water installation any time soon. In spite of this, it is pleasing to the eye. A set of extra gaskets is included as well,.
I use it in my RV. A 5th wheel RV and I have both purchased these. As I recently purchased the Nautilus P1 water / waste control system, I purchased these extra weight adapters to assist with the stress from the hose's weight. My hoses now run in a straight line. The gaskets are rubber and the brass is solid.
I think this item is great. There is too much distance between my outside faucet and With this change, it is now easily accessible.
There's no angle connector like this! You have to agree that they are great A connector with an angle. The brass ones seem durable and look like they are made from brass. Based on two-thirds of the way Each rubber gasket comes in a package of four Two extras are installed in addition to the two already there. It is possible to combine attachments in various ways. Spigots are low to the ground where I live. A 5 foot section of it extends straight away from the house. My driveway is just about 3 inches above the ground. The right to re-examine this is mine Use a two-way connector on the spigot if the connector has an angle Two water hoses are fed by a valve shutoff. During the day, I use the spigot as my main shutoff and the dual-shutoff for the night A valve that allows me to select my hose of choice. There's no doubt that these are the right ones- It is unlikely that angle connectors are going to fail sooner rather than later!.
But I have only a short-term perspective. A major advantage lies in the little wings at the top of the connector, which make it easy to screw it onto the hose bib. The elbow pivots independent of the top of the connector, making it easier to connect the hose and use it.