PC Products PC-Clear Epoxy Adhesive Liquid, 1oz Double Syringe, Clear 70147

Unlike superglue, this will not bond the pieces together for a couple seconds and then let them go. Adding glue to a canvas will not ensure the best bond. Let the glue cure for at least two hours for the grab the pieces, clamp them together, or set them up in such a way that you can leave them sitting still for at least a couple of hours while you glue them. I used it to restore a couple of broken porcelain statues After mixing and letting the epoxy sit for about 90 seconds, I transferred it to a plastic bag. In the end, I used a toothpick to apply the glue to the statues, then set the statues so they could cure without me having to hold them together as I stood. I really enjoyed using it. Only the crack can be seen on one statue. Two of the statues have no site visible, and the third one has no site at all. It is also nice how the cap is designed so that you can reseal the glue and reuse it. Up to date My wife and I got a little mad the other night, and we broke one of the bed headboard finials. A little glue mixed with water and I had it back on as.

Madilynn Choi

| Sep 15, 2020

The company that used to provide toilet tank covers no longer does so and so we had to repair it, since there are no replacements available. The original glue we tried was Gorilla Glue, but the result was unsightly and did not As a result of my second attempt, I researched how to repair porcelain and found this resource. In the end, I ordered two one-pound boxes because the amount I would need was not clear, and I thought it would be easier that way The packages are in ounces. I used maybe 3/4 of one of the pieces of my tank cover that was in three pieces and badly in need of repair. All in all, I found the epoxy to be incredibly easy to work with and it dried clearly. Cracks are still evident and glue marks can still be seen. There may be a bit of confusion with the visual of a glass. It is not possible to glue two glasses together and make them appear brand I am happy with it and will use it again, however, because it did the trick for my project and it came out better than I expected, plus I think it is holding way better than Gorilla Glue, so I am glad I got it.

Javier Willis

| Aug 12, 2021

There was a problem with my copper pipe before there was a problem with the epoxy. The bonds made with this stuff are extremely strong, if used correctly. The copper pipe was attached to an aluminum pipe using this tool. I realized I needed to get the copper pipe off so I was able to complete my DIY project. Apparently I broke the copper before I was able to get it to budge, so I had to hack saw it up and break parts of it off with pliers to remove it so I can reinstall I would rate that adhesive a ten out of ten. to be able to make my two pipes into one this was a pretty good solution to accomplish that. In the wrong hands, this bond won't be as good as it might be, but if it's handled well, this bond can be great. Putting two flat surfaces together doesn't work as well as gluing them together. You can roughen up the surfaces to help, but all you need is for one edge to cope up a little, and the head can be removed. It is amazing if it is a 3 dimensional joint, so that there is adhesive keeping it from moving while being able to pull off. Whenever I take something off after the epoxy has been properly cured, it breaks before I can remove it. In case you were wondering, I could not have asked for more as a permanent solution. In terms of ease of use, this is a very easy to use system. It's easy to make a plastic surface that is resistant to water by squeezing a bit onto a piece of cardboard covered with packing tape. Paper clips are a good way to mix them together. Put it into practice. I'm still waiting. It is important to note that a hot environment sets If you get it on your hands, make sure you don't wash them with soap it is sticky and won't come off easily. The only difference is that it's not super glue, so it won't stick your skin together immediately. For that reason, it earns more points than glue.

Besides being affordable and nontoxic when cured, this substance is extremely effective. The result is that it will be safe for many There isn't much more I can ask for.

Maya Stanton

| Mar 08, 2021

The mixing stick was left in the pool after I mixed it up. It took 4 minutes to set up the glue as it was advertised. Until 20 minutes into the experiment, I was still able to move the stick around, and then I lost it all entirely A minute marks the minute. The Double-X method has been used by me It's quite common to hear Bubble (by Hardman), which is a 3-syllable song It took three minutes for the stick to be stuck in epoxy, and it couldn't be moved after 5 minutes As promised, it will take 5 minutes. As a result, I have no clue about the 4-point claim In terms of curing time, this depends on whether it is at the beginning or the end of the Would it be possible to double the viscosity in the beginning? Despite it being stated that it would set in 4 minutes, I was disappointed when it didn't. The price is the only thing keeping me from taking * Update * The label reads "work time 4 minutes" now that I look at it again. This does not refer to when it would cure (or when it would no longer be able to be moved around) but rather to how long it will take to set up before it starts to 'gel'. In other words, if this glue were to be labeled like other epoxy glues, it would probably have a 20-part code It is called 'minute epoxy.

Lyla Yu

| Sep 21, 2020

This product was a good option for kintsugi. It has a strong hold and works perfectly on Since the bonding process was much faster than expected, I had to buy another to finish my project. I'm glad I got it at such a low price!.

Hazel THOMSON

| Apr 29, 2021

Useful for repeated use. The cap easily goes back on and is stored for safekeeping. I am very happy with how I was able to have my decor plate repaired. The following is a tip on how to fix a plate or similar object Stir the glue for about 60 seconds and let it sit for about 15 minutes Allow 120 seconds for the application to take effect. It allows it to stiffen a bit, making it easier to work with and less liquid. Pressing the parts together first will ensure that they will stay together well and won't move around as much as usual. You don't want to wait too long to apply glue, especially if you have to cover a large area which may take extra time. The glue has a "working time" of 5 minutes. Take a few moments to think about it. Keep your hands warm! As soon as the glue has set and the thing you're gluing is relatively stable in five minutes, you can start removing the tape If you have excess glue, you can clean it up with acetone or rubbing alcohol in ten minutes, although I found acetone to be more effective. Scrape it off as soon as you get it as long as there's a large glob of glue. To do this, use a scalpel, a plastic card (such as an old library card), or similar method.

Brody Combs

| Nov 12, 2020

As long as this product remains flexible, it will remain competitive. I guess you could say super-charged The chewing gum hardens when cured, and it is much easier to work with than super-hard gum I use this more frequently than glue because it lasts forever in the syringes, plus the lid keeps the unused portion The mixture mixes easily, does not smell, and bonds well to a wide spectrum of materials (glass, ceramic, plastic, etc. ). My approach is to clean the surface and rough it up if I Please note - It's good to finally find an affordable American product that works well!.

Nehemiah DAVISON

| Feb 09, 2021