Gorilla Micro Precise Super Glue, 6 Gram, Clear, (Pack of 1)

The glue I use is my favorite. It's what I use to glue on my nail tips and I swear, they last 2-3 days There are 3 weeks left. Buying full nail tips (on Amazon) like the press-ons and coloring them before I glue them on work for me. There has never been a more professional look to my polish and designs. saves me so much time because I do not have to redo my nails as often, since I usually soak the tips off so I can change the color. If you leave it on for a longer period of time, it becomes easier to remove, and causes no more damage than nail glue. Getting acrylics has caused no more damage or brittleness to my nails than I would if I had a full set. For those who would like a picture of the nails with the nails on, I can provide them on request. I won't usually take photos of them while they are on, but if necessary, I can give you a picture of them with the nails on.

Jennifer Hawkins

| May 21, 2021

My Schecter Omen Extreme 6 electric guitar recently had a few fret wires pop out from some gremlins. It caused notes played on the frets cited above to be choked. I did that in the midst of an intense, "Why the HECK did I do that?" moment. When I realized the guitar fretboard was not down, I took a soft mallet and tried to whack it In addition to not working, it caused a few more frets to pop up. After watching a video on YouTube that said you can superglue fret wires back down, I got this brand because it's not a gel and the applicator tip is precise. Gorilla Glue Gel has also worked great as a sealant on 3D printed parts. So I put this glue to work and got to work with slider bars clamps. tip of the glue applicator was too large to allow me to shoot it cleanly UNDER the fret wires as I Finally, I worked out a technique that forced glue under the fret wire Just pump a large amount of glue along the fret wire and clamp it down right away. This worked, but meant I had to wipe glue off the fret wire very quickly before clamping the instrument It's hard to put a precise measurement on the gap space I was working with, but there is the rule of thumb with frets on a guitar that you can't slip a piece of paper under any fret, and I was able to do that easily with many According to this rule of thumb, I would estimate that I was trying to force the glue into spaces about 0. 015 inches wide. The result is "0" instead of "006". The applicator tip used for this bottle is a bit wide at 015", so even a very fine tip would not have been able to push the glue in without manhandling it. I still wish its inner and outer diameters were smaller. In the end, however, this glue did the trick. It's not just that no more choked notes or buzzing strings occur on my Schecter, but I also experience considerably smoother play action when I do long slides up or down the neck, particularly when I'm miking my scales. When it's time for another bottle and I have to buy more, I may check other brands to see if they have a finer applicator tip, but I will stick with Gorilla if doubt persists.

Shay Delgado

| Feb 05, 2021

I use it a lot at work, not often, but more often than I should. On my first trip to the store, I purchased three different types of super glue with precision Then a few months later, when I used them, I found this to be the only one that was still moist. It is also incredibly easy to apply due to the bottle. Controling the flow is as easy as squeezing. I go to it when I need to Since my micro parts will need something that has long shelf life but is also easy to apply and control, I'll turn to this solution from now on.

Jayce Warner

| Aug 22, 2021

This came about because I started to get into 3D printing, and some of my more narrow prints were breaking. These two do a fantastic job of holding each other As well as using it around the house, I have discovered a number of other uses. Using it to fix IKEA furniture whose veneer started coming off is a great idea. Then I just had to add a few drops and it was back to normal. There is nothing I can complain about, and I will definitely buy more should I need it in the future.
NOTE If you do this, be sure to wear gloves. People who don't do so have enough horror stories to tell, and I just want to provide that PSA to everyone.

Richard Strong

| Mar 30, 2021

It is important to use a small amount of super glue when using it. A bond that is used more than necessary is severely weakened. It has been used on plastic and I was able to control the amount and place of it. Assuming that the two parts are cured in such a short time, holding them together during that period of time will be enough to initiate bonding. Of course, this does not cover all cases. As far as glues go, I'm extremely impressed and definitely recommend this one.

Delaney Curtis

| Nov 09, 2020

Fixing glasses is made easy with Quick Dry's precision application and quick drying. You should wear gloves or keep your fingers free of contact with the liquid because it will be tough to get off your skin after just a single drop.

Kyler Gillespie

| Dec 26, 2020

I have used this brand of super glue along side 3 others I have used that were barely able to hold together any item I glued, i do think the glue takes a while to dry but that is because I go overboard with the amount that I use. As a result the adhesion is extremely good and the bottle is designed in a unique way that makes it very easy to use. I have found it to be extremely difficult to remove the glue unless I squeeze it on the sides, which in my experience prevents leakage that has occurred with other bottles of adhesive in the past.

Michaela TOMLINSON

| Jan 19, 2021

Depending on how hard or soft you squeeze the glue, I love how it flows out slowly or quickly. During my projects, I have tried some variety of glues, and this is my favorite.

Noah Shields

| Sep 25, 2020