Slope Meter No. 2

A detailed instruction sheet is included with each slopemeter. Here are a few points to remember 1. You will be able to see the slope when this spot is selected in the machine The metric system is based on solid, flat, straight, rigid units. Ensure the machine is level before starting. I am on the slope - An aluminum mounting plate is integrated with the meter and bolted to it with two nuts and Slope- can be lifted by removing the two bolts Count the number of meters from the On the side of the mounting plate closest to the slope, there is a small hole and a small vent. The bolt holes are surrounded by raised flanges or rims, and the slope is measured from the bottom This side must be remounted with the new meter. *br>3 Plating should be attached to a flat, straight, rigid part of the machine or to an angle iron to be mounted to the machine, and it should be leveled If the plate is mounted on a slope, make sure the slope goes against the plate By fastening the measured part to the side with raised flanges around the bolt holes, you can see that the bolt holes can be hidden. A copy of the original can be found here. 4
After you have bolted the slope - Adjust the meter back to its original location on the mounting plate and check the leveling one more time.

We don't have a store in Canada, so I am sorry. Our items are available now. Thank you for your interest.