Jeremywell 2 Piece- UCF201-8 Pillow Block Bearing 1/2 inch Size Bore, 4-Bolt Flange, Solid Base, Self-Alignment
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
Using bolts of 3/8 inch size, I drilled 15/32 holes for the From the center of the bolt hole at the left top edge to the center of the bolt hole at the right edge is 2 &apos 1/2". There is an approximate distance between the top left center bolt hole and the bottom right center bolt hole. The following is a 3" 1/2 inch measurement
A ball bearing is used in this.
Selected User Reviews For Jeremywell 2 Piece- UCF201-8 Pillow Block Bearing 1/2 inch Size Bore, 4-Bolt Flange, Solid Base, Self-Alignment
It has been noted in some reviews that someone received a bearing incorrectly seated in a housing. In spite of this, I bought a set. It was no surprise to me when the housing on one of the two was misaligned based on how I opened the package. Because this is a pillow block bearing, it should be centered I ordered a replacement because I didn't like these guys. In my case I didn't need it to be high quality, just centered, it will be used as a pivot point instead of turning. If you're powering something I can live with it, but if you're not - I can live without it. Keeping looking is what I would do. The following update has been made I have received an order for replacements. Similar to what I said before This is one of the good things I do not like this one.
Using bolts of 3/8 inch size, I drilled 15/32 holes for the From the center of the bolt hole at the left top edge to the center of the bolt hole at the right edge is 2 &apos 1/2". There is an approximate distance between the top left center bolt hole and the bottom right center bolt hole. ICF201 3 12 inches in diameter Flange bearing with 4 bolts for 8 1/2" square, type The bearing has a 4-bolt flange and is made of the following materials The following sections describe how to lubricate cast iron In the pre- The shaft is 3/8" in diameter. The bolt is lubricated. Load (Cr) 1/2" x 3/4" A basic load (Core) of 8 KN is The bearing no. for this machine is 65 KN. The UC201 course This refers to the eighth house on the street. Number of F204
s The bearings are 4 inches long and have the following dimensions This means that you cannot write anything besides I'll make it 39"*bj - 52" - A2 - A1 - 59" The 43rd inch
A is S - 00" The radius of 50"
N is The 45-inch
B is the most common.
There is so much wrong with this product that I not only want my money back, but also an apology from the company that sold me this of such poor workmanship. These bearings were not seated properly, the bolt holes did not line up, and the metal was The only way I could give zero stars is to Do not further humiliate yourself by walking around with your doors open.
One is a mismatched pair, and the other is a matched pair Aligned to the 3-dimensional plane The axis is angled at 8 degrees. The bearings appear to have been put in crooked using a hammer since scars are visible on them. As it stands, this is an awful product. It is completely unsuitable for anything that requires a hardened shaft.
Quite possibly they may as well sell the parts as a bag. In my laughter, I literally dropped my coffee because the zerks were loose and the bearings were all over the place in the blocks. Then he tore them apart and re-united them It has been greased and re-oiled They will work for my purposes as I have pressed the bearings. My findings were in line with what I would expect from a cheap solution on Amazon. If you don't want to wait for the product to ship, or if you don't need something you can unbox and use right away, look somewhere else!.
It appears that these pillow blocks are of good quality, were fast to arrive, and were considerably less than those sold locally.
Product is of good quality, and the price is low. People who were surprised by the crookedness of the product will be relieved to know that it centers itself on its own.
Will definitely use I will order from them again due to the quick delivery.