Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1

Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock - P205

$ 19.95

Score By Feature

Based on 153 ratings

Value for money

8.95

Delivery

8.98

Customer service

8.99

Packaging

9.31

OveReview Final Score

How Our Score Is Calculated

Product Description

In this type of bearing, the self-aligning feature is built in. Occasionally, sleeve internals of bearings can appear to be crooked. This is nothing to worry about because the sleeve is meant to have some play in it so that it will self-align with the shaft over time.

The UC205 course With a 16 chrome steel bearing, you can operate at a range of speeds efficiently

There is a dynamic (radial) load rating of 14 kN and a static (axial) load rating of 7 kN.

Slippage of the shaft is prevented with set screws

A shaft with an inside diameter of 1" will fit traditional

Questions & Answers

It is not square to the bearings when I received the cast iron pillow blocks. Do you intend this to be ?

A similar one once belonged to me. A bearing can pivot in its mount so that it can be aligned to meet As soon as you have the shaft in place, you will be able to make adjustments.

In which of the following categories does a bearing not self-align belong? What's the fix? My preferred method is for the outer race to attach to the housing and not float. ?

Defining rigidity as the ability to fix

Can this pillow bearing be greased with a grease fitting (zerk) of what size? What should I do if one of the zerks has been lost after I purchased them earlier?

A quarter of the equation

I am curious if a 3/4 in. pvc, SC 40 pipe with an OD of 1 will work. This is also a 1, and I believe it fits in this category. What's everybody's thoughts? I'm not sure. Who can speak on my behalf?

The 1" program did not seem to work. DOM tubes with 25" walls are used in them. Measured at 1, the tube had a diameter of Chucking up a .004" piece and taking it down to a was a tedious process. It requires a diameter of 999".

Selected User Reviews For Two (2) UCP205-16 Cast Iron Pillow Block Mounted Bearings - 1" Inch Inside Diameter w/Set Screw Lock - P205

I had no expectation of how cheap it was

3/5

The price of these parts implied low quality and likely a low cost component, but I was surprised at their quality and how loose they are. I would consider them very light duty. They seem loose and sloppy. It is best not to use them in a loaded or precision application, otherwise you may have to replace.

Desmond Morrow

| Sep 22, 2020

In the first 5 minutes of use, one of the two bearings seized

3/5

This pair of bearings were spares from a set of bearings I used on a The first bearing in this kit failed right out of the box, and it is not properly mounted.