Corby Of Windsor 3300 Pants Press In Mahogany
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
As an owner of both the 3300 and 7700, I have experience with both. There is only one button for turning the device on and off. It only takes a few seconds to fasten the slacks in the press. A red LED countdown light is included on the 7700, along with the buttons to set the clock to 15, 30, and 45 minutes. Additionally, there is a retractable bar on the 7700 that can be used to hang The quality of the pressing done by the 3300 and the 7700 is the same. Consider the 3300 instead if you want to save a few dollars.
The unit that I have been using for years in the US is plugged into a 110 volt
Since I have never had a steam press, I have no idea how it compares to it. During my laundry at home, I like to press blue jeans and other pants with the Corby. As well as using my Corby for pressing, I use it to dry any items A pair of pants that I wore for a day, freshly cleaned. It used to be that my pants needed to be dry cleaned after I wore them Now that my pants have been pressed by the Corby, I am able to wear them two or three times before they need dry cleaning.
I don't think you'll be able to, if you place the pants carefully along the original crease lines in the Pressby. As if they had just been pressed, they'll look fresh out of the press.
Selected User Reviews For Corby Of Windsor 3300 Pants Press In Mahogany
Heating element was replacing). In the absence of competition, one has no incentive to develop a repairable design or improve. Therefore, the new model lacks any evident improvements and actually performs remarkably worse than its predecessor - it does not physically press the pants, and the closing bar is not adequately tested during manufacturing. It arrived in a box that was literally open at the top.
Four of these models have passed through my hands, and this is my second 3300, since the 7700 is a lot more expensive and just doesn't deliver better quality. Buying them over and over again must mean that I like them, It would be great if that were the case, but each one I buy is built worse than the last, and this one just came in an unsealed box, the bottom (now almost cardboard dented) and the top are both It works, so I will keep it. I plugged it in and it works, so it's not worth the trouble to return The bottom line is that I don't recommend it anymore because of the quality, but as of now (until I see what COVID does to office suits) I need something to press pants with, and it won't be me using an iron or steamer It's probably true. I'm giving you a final win, but this will probably be the last one, either because I never need one again (retiring to shorts and t-shirts) or simply because the quality is getting worse and worse, and I receive boxes of wood pieces and wire every time. I guess the steamer and manual labor are going to be necessary next time. You can also find it in lakes.
I bought this thinking it was the same product as the one I bought previously from Corby of Windsor since it appeared the same in the ad and was approximately the same price. It wasn't the same product. We were disappointed with the cheapened up product with fewer features and the less attractive design.
However, it does not work as well on thinner fabrics, such as suit pants, as it leaves a wavy residue after use that produces wrinkles worse than the ones that would otherwise be present, and requires post-use ironing of the garment. You could possibly wear jeans or corduroys with them, but business suits likely won't work.
It has been on my mind to purchase a pants press since I noticed that I was paying to have my trousers dried- The fact that they were wrinkled rather than dirty mainly prompted them to be cleaned. The cost per visit was adding up at $7 a pop two or three times a week. dreads ironing them she doesn't like doing it. a breeze! After attaching the top and feet, it didn't take more than a minute. Those who have commented previously on the Corby 3300 have commented that it is fine as long as you are realistic in your expectations. There is no other purpose for the presser than to lower the trouser legs below the waistline, which it does. It is critical, however, that the pants are inserted properly into the press To avoid having the folds emphasized, be sure to smooth out the trousers before and after you place them into the press. There is a 30 minute cycle on the press, though I often give it an extra 15 minutes. Some buyers have complained about substandard construction (there are more expensive models that offer longer cycle times, but in my humble opinion, they are not worth the additional cost. ) In my opinion, the press is not built to withstand a lot of abuse, but if you use it with care, it should last unless something breaks like heating elements or A part may fail or other parts may Thus far, I've used it about 20 times over the past few weeks without experiencing any noticeable wear. In the event that anything changes, I will update my review. *EDIT
I am still pleased with my Corby, which has remained in good condition almost three years after I bought it. As of recent, I have been pressing my pants after I wear them at the end of the day and hanging them up It has the effect of giving wrinkles less time to "set" that way, so I don't have to press them the next time I need to. I mentioned in my previous review that the Corby is a good option if you have reasonable expectations about it - it doesn't press pants as crisply as an iron, but it is.
There was no way to return the items to Amazon My steam iron is now what I use to press my pants. I can't believe how much money was wasted.
Despite its long service, it has finally begun to show its age after serving us each everyday for all these years. The price of the 3300 (I liked the basic model) I ordered him from Amazon and it was not that much different from what I paid in 1984. It keeps capris, pants and other pants pressed and creased no matter what size they are. Having this system saves us a great deal of money on cleaning. This is essential to my life!.
This product does what it claims. To get rid of wrinkles, I steam my suits every day before I wear them to work. In addition to removing the crease from pants, steam also does the same. My pants are placed in a pants press, and after 30 minutes, they look as if they just came back from the (Pants must be placed correctly or they will crease twice.
Related Products For Corby Of Windsor 3300 Pants Press In Mahogany
