Adding cameras is easier than ever before, while saving time and improving the quality of cable connections.
The only tool required was a small screwdriver. There was no electrical tap, no crimping, no splicing, no crimping.
The Daykit has 10 pairs of 12V male+female 2 - Male FEMALE. One and five. The connector on the 5MM DC Power Jack plug is 5MM in diameter
Keeping the appearance of power cables simple and professional.
The custom power cable solution is perfect for those who want to design their own Connecting CCTV Cameras with DC Power is easy with this CCTV Camera DC Power Connector.
Questions & Answers
What's the best way to connect a female plug to a female plug so they work together?
Would you mean making an extension cord that has only female ends be possible by wiring a female plug to another female plug? A big YES to that question. Because you will be the one doing the connection, your only tool will be a small tip screwdriver, like the kind you'd use for eyeglasses. A thin gauge speaker wire about 20 or 22 gauge was used. The plugs that I have are used to run the 12 volt exterior wire that powers my security cameras throughout the house. I have lived in the house for over three years and the only problem we've had was a year long battle with the homeowners association over the external appearance of the house. were finally approved but two months later, I received a notice of violation for failing to accomplish A camera that has been approved. The Board approved their own files, but they did not check their own files. I have had no problems or issues with the plugs so far, and they are easy to use and easy to hold in place.
Which size cable fits this best? Would a 20awg cable work, or is ?
There is no problem to use 20 awg. I've used it between 24 and 18 awg without any issues.
Selected User Reviews For DAYKIT 10 Pairs 12V Male+Female 2.1x5.5MM DC Power Jack Plug Adapter Connector for CCTV Camera
This is a bad idea if you're using 12 volts
| Jan 18, 2021
There is no guarantee that everything will go smoothly! There seems to be a lot of strength in them
It's a shame that the terminals are so Stripped wire is difficult to get the length of exactly where you want it, and even if you do, you have to clamp down hard on the screws to prevent the wire from After my first failure I tested the rest to ensure I wouldn't make the same mistakes This means that 20 percent of loot fails. This is unacceptable! A RECENT UPDATE! As of now, 3 of them (all female) have proven faulty.
| Apr 03, 2021
It has never happened to me to see such bad There are screws that don't work on half of the
It has never happened to me to see such bad I hate you. I hate you so much. In order to test 16AWG and 20AWG, I used both. This is a stranded and solid network. The connections on these must be utterly horrible. The wires will not hold a light tug on the cord. Avoid like the plague.
| Jan 05, 2021
This is a terrible connector and it may be dangerous
br>Really bad connector and potentially DANGEROUS. The wires do not tighten enough to prevent wires from pulling out or falling out with the slightest stress or tug. This is the fourth time I've tried it, and it didn't work. Since the wires literally FALL OUT of these connectors, a short circuit could occur and a fire could ensue. Therefore, when using these connectors, make sure that you use an inline fuse on the power supply side to prevent this.
| May 05, 2021
Your 12V systems will be easy and fast to connect
You can use these Daykit quick connect ends to add accessories to your motorcycle, car, truck or boat. This is a great way to simplify wiring connections, since you do your wiring first, attach the accessory, then You should note It is not recommended to place these connections in areas that will be exposed to the elements (don't forget to cover them with 'spray on electrical tape' to prevent any moisture damage). If you get your 12V system wet, it will do strange things. It's not necessary to blow a fuse all the time. The importance of insulation cannot be overstated. This connector looks good to me. In addition to halogen driving lights, a power port, an electronic tuning device, and LED lighting, I use them on my motorcycle. The purchase of this product was a wise choice. I give it five.
| Apr 26, 2021
It is a good concept, but it is poorly implemented
Neither the tip nor the insulation on the conductors is sufficient. When two parts are inserted into each other, it shorts out the power supply and a big spark and flash occurs. According to my calculations, the voltage spike from the spark will destroy the end gear or blow the fuse in the power supply. If you are looking for a similar solution, look around because this is not what you need.
| Feb 04, 2021
My connectors fit perfectly and performed more than I expected
They arrived on time and were well worth the wait. As the connectors I received were used in a camera system at a business, having this product put my mind at ease knowing that the cables are protected is very important. I would buy this again for my home use as well. Again, thanks for your assistance!.
| May 04, 2021
You can rely on it! The DC power jack plug adapter came in handy when I needed to extend the power cord of my camera
The installation process is easy to do, the pugs work without any issues, and it is a no brainer. As a result of its price, this is a winner. It comes with a total of 10 pairs, which is more than enough for my needs.
| Jul 30, 2020