Replacement for JBL Charge 3(2016),Charge 3 (2016) Version Battery Pack 6200mAh Speaker Battery GSP1029102A(Not for The Charge 3 (2015))
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
While the original battery had a capacity of 6000mAh, the battery I bought was 6200mAh, which made it fit perfectly. Therefore, even more time to play
You will be able to use it if your plug has the same end. It is possible that the Ah is different on each You should be able to get one that has at least as many Ah as yours.
There should be no need for this. If you take off the outer shell of the device, and then the rubber/plastic cover that covers the battery area, there will be a clear plastic casing that surrounds There is a gasket between the clear cover and the unit that helps keep it sealed (there), so when you take it off there is no leak. Truthfully though, you have to remove the side speaker baffle to access the battery plug, where it plugs into the motherboard. It has an opening big enough to feed the wire with the plug in, so it's never 100% sealed. By just changing the battery, you will not affect the water-resistance or waterproofing of the phone. I suppose this is good information to know, Sal. Here are some suggestions I hope are helpful
Selected User Reviews For Replacement for JBL Charge 3(2016),Charge 3 (2016) Version Battery Pack 6200mAh Speaker Battery GSP1029102A(Not for The Charge 3 (2015))
This product works well and comes with a good tool kit, like most JBL batteries you get. I own four JBL speakers, so I have purchased quite a few over the years, and My charge 3 requires a new USB charging port, so it is still broken. I will keep this battery for a future charge. So far I have not found a part on Amazon. If anyone knows where to find one, please let me know!.
There were 4 amps in it when it was delivered. Once it was installed and charged, it ran for more than 30 hours before shutting down. It exceeded my expectations, and I am very pleased with it.
As much as I loved my Charge 3, I had trouble with its battery life after years of use, and it made popping noises when used. Take a look at the battery of your JBL Charge if this sounds like your unit by searching for how to open it up. A large part of mine was swollen, probably as a result of heat or aging. As far as the battery is concerned, the speaker is like new after it was replaced. In reality, there is only one tab to hold the outer casing together, as there are 4 tabs (2 on each side), and thus I have not had any problems with the outer casing coming apart with just three tabs. You won't end up with this problem if you just take your time when opening (don't force it). The speaker has been producing excellent sound for three months.
In addition to the battery, a tool kit was included. It was impossible for me to replace the battery without the tools. We had to replace the plastic pry tool. To open the speaker, I had to use a butter knife. There was no Phillips driver included with the driver tools. It was good to have one that I could call A perfect fit was found for the battery. As soon as the battery was fully charged, I was listening to my favorites. My sincere thanks.
It's a shame that my JBL Charge's battery died, because I love it so much. I swapped out the old one for this replacement, and it was very simple to do. After replacing the battery in my Charge, the battery life has returned to like new. I will be replacing the battery in another device.
The software has been installed and is working fine. You'll want to hold the tape in place with 3m double sided tape. As well as screwing everything down firmly, you want to prevent the frame from rattling. Despite what you might think, the battery does not cause the rattle. This happened simply because we didn't properly tighten the screws.
There was no longer an adequate charge in my JBL Charge 3 speaker. In addition to the battery, a few simple tools are included that are needed to open It was very easy to install the new battery. Be aware that you have the standard version or the 2016 version of the speaker (you can tell this from looking at the color of the wires). I have now restored my old speaker to its former glory!.
This is an exact fit for the Easy to replace because the cable was a bit longer than it was originally. As soon as the tool was used to pry open the cover, it broke.