suptek Laptop Notebook Steel Tray Platform (Tray Only) for VESA Mount Stand | Fits 100 mm Plate Holes (TP004)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
If you would please send us an email with your order number, we will be able to assist you. As a result- Please email [email protected]. It's a website
It is impossible for me to know As I don't know much about the metric system, it seems like 400mm is roughly a tenth of a meter and 800 is close to one The parts that come with most of these things are meant to be used. The result of Frankensteining it with parts from another product is likely to fail.
How are you going to get the other arm? I think you have a good idea, but where are you going to get it from?
The answer is yes, I suppose. Nevertheless, the monitor would essentially sit right on top of the pole when you attach it to the surface. If the laptop were lying on the table, that would be possible. It allows me to set the laptop screen close to the same height as the monitor, and high enough so that both screen and monitor are just below
Selected User Reviews For suptek Laptop Notebook Steel Tray Platform (Tray Only) for VESA Mount Stand | Fits 100 mm Plate Holes (TP004)
As I mentioned in my comment, the item was missing key components required for assembly, but I said no other negative thing. If this is the case, one should report it and take it into account when reviewing the product, shouldn't one? As a result of the missing screws, I am unable to use the product. There is nothing to indicate that the product is not well made and sturdy. But there was a Are there any improvements that need to be made for this product? To maintain my honesty, which is upheld by my review, how else may I say this? Is it of any use to produce a product that cannot be assembled? This item cannot be used by me. We've reached the end of the br>br>We updated our Oct 2018 files to reflect this. We apologized and issued a credit to the seller for our trouble finding new screws at the hardware store. In addition, I am very satisfied with the customer service I received and with the stand. It supports either of my 15 and 17 inch laptops and my 24 inch monitor easily. The importance of good customer service cannot be overstated. It was made right by the seller. I added 2 stars to make a total of 4 stars to reflect my opinion of the product.
Fortunately this mount has a nice spot by the joint where I could run a Velcro tie to counter the wobble. (2) Yes, the tray will wobble, it's slight, but you'll get that with ANY brand. You can see the picture here. There is no explanation for (2) the person who had bent metal and a missing screw. As a result, I received a kit with everything I needed already packed and sealed. (2) Thank you to the person who brought up On my desk top there is a bevel, and I just stick a pencil in there and tighten it. It's perfect. Lastly, I have a desk that has a lift top, and so I thought for sure I'd have to drill a hole to secure things there. The clamp is incredibly strong, so there is no need to loosen it. My laptop didn't shake at all when I adjusted the desk height in a video I took. I cannot say enough about this product other than don't waste your money on something you think will be better if you pay more.
the perfect solution for my needs as a ham radio operator because I was able to make use of a desktop PC and a laptop in a small space and be able to see both displays without having to close my laptop or turn off the LCD display on If I were to purchase this again, I would Moreover, it was also available in two options for tabletop mounting A grommet hole in the top has to be bolted through the edge or it will clamp to the edge. If you get it adjusted correctly, you can lock it down and it will stay solid.
The monitor stand is good, but it has a few minor issues. Because the mounting screws were too long, I had to get them myself. Since every monitor is different, it shouldn't be a major issue. You can do it either way. I am very happy with the arms of this chair because they are strong and hold up well to the weight of my heavy Asus gaming laptop and my light 27" Samsung Odyssey monitor as There are so many ways to adjust the monitor that I love it. With the laptop stand, I have an additional cooling pad on it, and I can put my laptop on top of it so it hovers over the desk. It gives me and my girlfriend a lot more workspace The following can be used for any purpose.
My stand-up desk converter was one of the first things I did when the WFH disruption began. I was able to bring my laptop and portable monitor to a higher position. I did not realize until the end of the day that I had been slouching A bit of height adjustment was necessary to raise the laptop and monitor. A clamp or a 'more permanent' screw mount could be attached right through the desk surface on this stand. There was a hole in the pre-filter of my converter It was the right amount of drilling. With the Riser, you can use up to two monitors and convert one of the monitor arms to hold your laptop at the proper height. It comes with a laptop holder, too, so you can use one of the monitor arms to hold a laptop as well. It's a little bit different for each arm, but you can adjust how high or low it can go on the post to find the best height A good buy, it has a lot of versatility, and it is at a good price.
It's easy to assemble and very durable. Despite the fact that I jolt my desk, it is not shaken. As a result, the work environment is super clean. It comes with a double arm that holds my laptop and a single arm that holds a 22" monitor. The monitor arm is set at its max height, so the top of the monitor is 21 inches above the ground. Ideally, there would have been 2 inches more rise available on this model, but it works as it The ultra-wide screen that I own is a 34" There is a wide monitor to the left of this, so everything needs to be arranged The two arms are just reachable enough to reach the laptop and monitor at the same time with that arc. If I had a bigger monitor, it might have been a problem There is the possibility that you used just the straight sid--unless you didn't need the arc A configuration is applied to one side. The stand is so beautiful!.
Desk mount that is very sturdy. A little bit of a wait to install, but that was due to my own cable management OCD. My desk space has been greatly increased since I do not have to keep a laptop on it. My 21 inch monitor fits on it like it's nothing at all. This mount combined with two tablet stands (one desk stand and one articulated arm) creates an effect similar to the wall of screens that I really like while my wife isn't thrilled about. I have improved my ergonomics tremendously since using this device. It is possible that I will purchase an additional stand to help accommodate my 27 inch monitor when it arrives. Please don't tell the wife that you did this.
Stay on the lookout. This is where I set up my laptop to play Netflix while using the dual monitor desktop as my workstation. Despite the fact that the laptop sits on a loose plate, it is not difficult for it to tilt slightly when I start working and don't pay much attention to it when I Though I imagine it would be much more annoying if you were on a laptop. In terms of vertical adjustment, it is not easy, but this is one reason this is more affordable The product could have been more versatile had I invested more money, but for my needs I rate it a 4 out of 5.