SimpleUSB Mirror to Dashcam Power Adapter (7-pin Type for Honda/Acura)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
There are two kinds of these - the 7 pin and the 10 pin If you just count the pins in the plug, you'll know - Make sure you are looking into You should be able to use it as long as it has seven pins. You should order the type with ten pins if it's 19.
A cover is not provided for the connector. It is possible that the port on your mirror is
I use this product on my 2017 Civic, the best way to determine it is by pulling out the power connector behind the mirror and counting the pins. The pins should match the product, so it should be ok!
The adapter has been designed to fit the Honda Pilot but it is recommended that you check your mirror connector first. If the female end of the adapter looks similar to the male end of this, then you can use this adapter. It will most likely work if there are a number of pins arranged in a row.
Selected User Reviews For SimpleUSB Mirror to Dashcam Power Adapter (7-pin Type for Honda/Acura)
I like it a lot! This is what I put in my Honda Insight 19 S. Wires don't need to be run and voltages need not be searched for. There is no need to install anything.
This small USB adapter comes packaged into a box (4"x2"x2") by Dongar Technologies, under the category SimpleUSB Adapter 7-Pin. Please pin this. The input for 12 A 24-hour, seven-day power supply A pin is connected to an output This device is dynamic (default 5V) and USB powered. <1 is recommended for devices that require it. The maximum current for optimal heat performance is 5Amp. Using dongar technologies. The site's support page is at com/support. The installation is straightforward (clicks into place, but you may need to press the clip to release it, as you did for the original connector) on the rearview mirror of a 2017 Honda CR-V. Former Vice President I (U. S. ). The only cable I needed for the dash cam was a short USB cable. So far, it has been working well. It would be nice to have it half the price, but it is.
This pin connector works great and lets you use the OEM power connector on the auto dimming mirror In this case, it fits Honda, and I used it to power my dash camera instead of running the wires through the trim to a USB port or cigarette lighter socket.
On a 2018 Honda Clarity PHEV, this is the case. The new solution is remarkably better than my old one (also from Dongar) which had pins stuck into the mirror plug that would pop out every now and then).
There is no need to cut wires or remove panels. The goods were packaged nicely and fit perfectly, and they were of Remove the connector from the back of the mirror and install, that's all there is to A power converter is provided with this SimpleUSB unit rated at 1 amp. The current is 5 amps. N>Through all the connections, wires, and shrink tubing, black is the main color. A micro USB cable comes with the package as well as two 3 inch USB This camera was manufactured by Apeman and is a C680. It doesn't seem to be an issue so far.
Exactly what I was looking for! It was used with a 2010 Honda Pilot equipped with a Nav system and an Akaso DL12 rearview A total of 10 minutes were spent installing A 15 second timer. That was a nice addition since it saved me $6. I didn't know that it came with a 6" mini usb and a 6" micro usb cable.
A fair amount of built quality can be found here. Because the models in 2008 and 2009 are the same, it should also work with those models).
It's the missing puzzle piece for a dashcam I've been searching for. It works flawlessly, and the idea is absolutely brilliant. I installed it in 10 minutes and it looks great. Good idea that allows dashcam to sit at an ideal location without having to run power cables for long distances.
Related Products For SimpleUSB Mirror to Dashcam Power Adapter (7-pin Type for Honda/Acura)
