Ulanzi Claw Quick Release Plate Tripod QR Camera Mount Adapter, Quick Setup Kit with 1/4'' Screw for Canon/Sony/Nikon Cameras/Zhiyun/Feiyu/DJI/Moza Stablizers Switch Between Tripod/Monopod/Slider
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
This is not a setup I would recommend. This is what happens when the turn comes With such a heavy load attached to the knob that attaches the camera to the mounting plate, it may be difficult to get enough force to hold it. Most of the time, I use the claw mount for Sony FDRs There is also a 3000X action cam and a DJI Osmo action cam, as well as a Panasonic 4K camcorder for the consumer market.
If you just want the top piece, you can buy it It's one of the camera plates There is a $18 price tag, however. You would be spending $2 more for the same price as $95. Wouldn't it be nice to spend only $ 00 and receive As of now, I own 5 units, and I connect the bottom piece to my several tripods, unipods, Joby GorillaPods, and Ram Mounts (which I use most days).
The Gen I is shown here. As per its description, the Gen II comes with slots for the Arca mount, which was the only one that was available at the time I ordered it.
Selected User Reviews For Ulanzi Claw Quick Release Plate Tripod QR Camera Mount Adapter, Quick Setup Kit with 1/4'' Screw for Canon/Sony/Nikon Cameras/Zhiyun/Feiyu/DJI/Moza Stablizers Switch Between Tripod/Monopod/Slider
I have been a professional photographer for over five years now Event photography is something I do. I find this quick release plate to be very useful in my daily This is a great product for running and training The gun comes in handy when you have to switch your camera between a tripod and a gimbal quickly. In addition to two Sony A7iii cameras, I also own a Gimbal Ronin SC if you have it. We have to spend a lot of time changing from a tripod to the Ronin SC gimbal every time we want to make a call To balance the gimbal, adjust the tension. I found this step to be the most irritating. It used to take about 15 minutes to remove the plates, now it only takes about 10 minutes Takes about 12 seconds to move from one side to the other. We feel that this is a must have & it is amazing The game changer of the century! It's a good deal for the price of this quick release plate. It's a great company I highly recommend.
)? While I thought going to the store and buying a couple ARCA Swiss Mounts would solve most of my problems. . . nope.
THIS DEVICE DOES! However, the only problem is that they're a little pricey, and you have to buy one for each device. However, once you buy a few of them, you will not have to buy them again. Get rid of headaches by swapping! In the amount of "mounting places" you probably have more devices to mount than devices to mount on them. Is it possible to have three tripods and four Put each bottom section on a different tripod, and put the top post on each camera (you'll still have one left for another camera in case you need it in the future). Having installed all of them, swapping cameras from one device to another is as simple as clicking and snapping.
A YouTube channel is on the horizon and I shoot most of my videos while driving the For the top of the mixer, I have a Ram suction mount, for the outside mirrors I have a Ram clamp mount, and for the ladder at the back I have a Ram suction mount. A total of 3000 and a half One DJI Osmo Action Cam) mounted on the dash, pointing to the outside of the mixer and back It comes so easy to me. In our opinion, these Ulanzi Claw Quick Release Plate Tripod QR Camera Mount Adapters are excellent for this purpose. As well as having a base mounted to my Switchpod for my everyday vlogging, I have a single body kit. Thus far, I have purchased four of these, and I will buy two more in the near future. A heavy aluminum body with an excellent locking system, these items are extremely well made and fail-safe. It's all true. There are four angles from which you can position the camera You will notice that there is a front, a back, a left side and a.
On my Zhiyun Weebill S, I tried this. My efforts were spread out over a number of A mounting plate is used. I had to tighten the screw to keep it from unscrewing and the camera was not balanced correctly. This is because it will start to come Due to the spinning of the camera, it is impossible to balance. Thus, I thought I would apply it to Not at all. I noticed that as I was holding the gimble, the grip that placed the Ulanzi Claw was coming I just tightened it because it kept getting loose as I was trying it out. With pliers, I tightened it a little to alleviate the problem. Don't be naive. I like it, but it could fail or come off.
A fine aluminum product, this one is easy to use and made of fine aluminum. There is however an issue of design below or a lack of supported gear to make it functional, as mentioned in other comments. The rotation play is present on both the part that attaches to the camera and the base mount attached to whatever you intend to attach A couple of uses of this quick release will cause the whole setup to unfasten, eliminating the purpose of it. It would be better to provide either an O- or a C- It is best to use a ring or washer to keep the screw in place or a small patch of mounting tape on a corner between the camera and its mounting piece, as well as between the base mount and the tripod/gimbal or whatever you are It was a combination of both that solved my problem. It may be advantageous for the seller/manufacturer to provide these items, or similar ones, to avoid returns and bad.
a) Zhiyun Weebill S, Sony A7III, and Sony 16-35mm Having a 35mm GM camera makes it nearly impossible to balance, and the gimbal shakes like crazy. However, the mounting plate for the Weebill works well. 1) These photographs were shot with the Benro TAD28A tripod mounted on a tripod stand, and the only movement was taking the tripod from room to room, then shooting remotely but for some reason, the top plate screw came loose regardless of my efforts to I've almost dropped the camera several times so now I have to keep an eye on My first impression of it is that it's very well built, it's compact design is great, it brings uniformity across all my shooting platforms, but it needs to have the screws fixed.
I like how the design looks, how the build is OK, how the quick release design works, how easy it is to remove and install once more It is however difficult to like because I tried it on a small monitor. After tightening the screw with a screw driver, the monitor still rotates slightly, but I think this is not an issue when you are mounting a camera or other device that mounts up.
I honestly can't think of anything more I could have asked for. The purpose of buying two was so that I could easily swap out my camera rather than having to change the proprietary mounting plate that came with the crane 2 since one goes on my tripod and one goes on my crane Everything is assembled on the gimbal now, and I just balanced it. I'm so glad that it helps to make my job My crane 2 came with a gimbal, which I had to balance every time I wanted to use it, which was annoying and completely unprofessional. There should be a package with multiple bases and a single camera attachment, in my opinion. In addition to only using 1 camera at a time, I have several tripods and gimbals I need to hot swap frequently. So I do not want to have to buy both pieces at the same time. Having said that, your camera might sit up higher because of the shape of the attachment, but I still think you should consider This is a solid.
Related Products For Ulanzi Claw Quick Release Plate Tripod QR Camera Mount Adapter, Quick Setup Kit with 1/4'' Screw for Canon/Sony/Nikon Cameras/Zhiyun/Feiyu/DJI/Moza Stablizers Switch Between Tripod/Monopod/Slider
