SVBONY Universal Dovetail Base, Finderscope Mount Bracket, for Installation of Finder Scope Green Laser Pointer Bracket for Optical Telescope
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In my limited experience of a red cat 51 star finder, I recognize it as a red dot (no magnifying glass) device You can use it if it has a Synta or Vixen wedge base. Based on Vixen's design, a wedge with a radius of about 1 inch can be used. The width of the picture is 7 inches. As for I had a hard time finding a base wide enough to fit the OTA tube holes of a circa 2000 Celestron 8" SCT with mounting holes wider than some dovetail bases, it was not the base fitting my red dot (unbranded) finderscope. You can ask the manufacturers of the red cat and the base supplier for the dovetail width of each of their items via messages. You might be able to get some help from them. I wish you all the very best and wish you a very successful business.
It has a diameter of 0. I am very sorry, but the screw size You can check if it fits your 8se if it is 2 inches.
*br>Thank you very much for getting in touch with me. *br>The screw holes diameter is 0 mm. A 2inch wide. For more information, please visit We need to I will provide 1 2 Days*, weeks*, months* • Garantie Within the timeframe 1 2 The past month You need to It is possible You are returning In order to Return of funds You can also An alternative. In case of You need to If you have Please include any Other data sources Answers to questions What we do In exchange for Can you please Please contact us We are us The freedom to We need to You'll find out It was work Then add &nbsp You need to The winner wins In order to The winner is. In the event that my response does not answer your question well or if you want to know more on this product, may I ask if you could direct message me It will be a first-time experience on Amazon when a customer message is seen for the first time, and will help remedy the situation Please let me know once you receive my response and I will do my very Looking forward to hearing back from you. I wish you the best of luck! I am Kelly
A maximum of 35mm is allowed for its dimensions
Selected User Reviews For SVBONY Universal Dovetail Base, Finderscope Mount Bracket, for Installation of Finder Scope Green Laser Pointer Bracket for Optical Telescope
There is a 5 mm gap below the bottom holes where the screws will connect the adapter to the telescope, showing in the image in the third paragraph down in the description. One millimeter is one-tenth of an inch. The diameter of this item is 2 inches. Gaps range from about 1-1/2 inches to 1-1/2 inches. The diameter is 5 mm and the thickness is The human height is 18 inches. My old Meade 291 2 finder scope had an adapter that had to be replaced, so I purchased the adapter to do it. A 4 "refractor telescope, but the original mounting holes for the finder scope were tapped for a # 10 (3/16) screw (as checked on a typical" Screw Checker "plate) and the original screws do not fit through the gap on that item. My plan is to file the mounting holes on the adapter a little wider so they fit the original (The item I received did not have any other clearances.
On my telescope there is no way you could bend the material due to where the screws fall, making this a very robust position. However, if this was on a tube of different size, i could see how this might be too thin in one spot. It works great, and you should definitely try it.
It did much of the work and provided much of the work. Unlike my scope, which has a diameter of about 300mm, this one may have been designed for a diameter of about 120mm. In order to make it fit, I did the following To make the slot wide, I drilled a hole in the screw head (not the hole). I used bigger Following this, the feet were milled back to their original shape. In case a file is needed, we can use it. My spotting scope and guide camera are attached to it and it is attached to my scope. A different screw would have made the top cleaner for me if the eye-sight scope was on the other side of the scope. To mount a scope, one needs a screw that fits.
Fits Meade Finder scopes. Using this method, I was able to reposition a Meade finder scope perfectly! As you may well know, the base is very thin and I bent it when I tried to tighten it down with a nut and bolt (it caved in), so I had to bend it back out and then insert three flat washers to keep the bolt from bending in on itself. However, other than that, it has a great design and works perfectly!.
Installation options are nice I like that I can adjust it left, right, forward or backward as necessary. A stock finder and mount had to be replaced, so I bought this instead. This is the Celestron red dot that I replaced it with and it works.
Mount that can handle heavy loads. I had to file the mount a bit to get the screws to go in because the screw holes on my LX90 were near the maximum size. There are straight holes in the OTA and curved holes in the OTA. Over all, I like that this is not a wimpy game.
I tested it with my Celestron C8 and Meade 8 inch reflector and it worked perfectly. Each of my scopes has two of these mounts on it, so all my accessories can mount on them.
My slot lengths had to be lengthened, but it is normal with a universal part. It is a great piece.