BATIGE USB 3.0 & 3.5mm Car Mount Flush Cable 3.5mm + USB3.0 AUX Extension Dash Panel Waterproof Mount Cable for Car Boat and Motorcycle (6ft)
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
In addition, I believe I used a hole saw to cut the hole or a 1 inch blade bit.
A USB drive is what I use to listen to Additionally there should be a charging capability, depending on the
About 7/8 of an inch or about 22mm is how big it is.
In my 2011 Honda Accord EX-L, I have installed a new Pioneer head unit Through the use of BATIGE cables, I was able to install a wall outlet in the center console by routing the cables from it and plugging them into the aux and USB interfaces on the head unit. Please be aware There are only three paragraphs in this report You can post an aux cable here Considering that might be something you should consider if you need a 4-foot pool I have added an auxiliaries post.
Selected User Reviews For BATIGE USB 3.0 & 3.5mm Car Mount Flush Cable 3.5mm + USB3.0 AUX Extension Dash Panel Waterproof Mount Cable for Car Boat and Motorcycle (6ft)
Upon reading the instruction booklet, I noticed that the USB and aux ports are located on the back of the stereo unit. However, I didn't realize how much trouble it would be to have to get back there again. Furthermore, I worried about how ugly it would look if the USB and AUX extension cables were hanging out the back of my
I bought this product with the hope that I will be able to replace the current car cigarette lighter port. It fits perfectly, and it is also a great solution to my problem. I had no problems connecting my devices to the USB port and charging them, and the AUX worked as expected.
It was part of a package of devices I installed on my 2007 Hyundai Entourage minivan as part of an upgrade to an aftermarket Apple Car Play As you can see, I mounted the USB port into the cigarette lighter opening on the Entourage. In the process of switching out the radio, I had removed the lower section of the center console, where the cigarette lighter is located. In order to get to the cigarette lighter, I removed the lower section, which gave me access to the rear of the console. I was able to remove the console assembly and bring it to my work bench with the help of a single wiring harness connector. In order to connect the cigarette lighter to the larger harness, there is a power connector. There is no longer a connector on the board. It was impossible for me to remove the cigarette lighter from the console no matter what I did. It was only after carefully crushing the cigarette lighter with channel lock pliers that it worked. I found it easier to crush it after a hacksaw was used to free up a couple of notch As soon as the lighter was crushed, it was easy to remove the mounting hole, exposing the lighter. When looking more closely, I realized the circumference of the hole was smaller than the design on the USB port, which I had expected. An airbrush tool called a Dramel is what I used To expand the circumference, fit the USB port along the way using a tool of this type. I then screwed down the USB locking nut as soon as the device fit in the slot. Now the port looks as if it was freshly installed I really appreciate the fact that you installed it in the console. When I connect my Apple car play radio to the USB port, it works flawlessly. Thank you for a job well done.
The numbers 0 and 3 are the same. A drill bit of 5mm is equal to a drill bit of 30mm. Specifically, I tested the adapters on my arcade machine.
I made an extremely detailed review for this particular Batige product. It's based on a This is the page for the 0 port product. If you want to read it, you can go here So, here is a quick summary of what is going on. The USB 3 standard is broken down into three parts
USB. The score is 0 out of A 5mm adapter will fit a 30mm drill bit and a Dual 3 adapter will fit a 5mm adapter. The size of the drill bit is 30mm when using a usb adapter. This is a simple formula 30mm = 1 I will give you where to find my drill bit, which is 3/16" (in fraction form)
I will send you the link for the drill bit. I use it all the time, and it's only a few It was shipped with Amazon Prime. I made 3 holes with one drill bit, and it looks like it may be able to cut more holes in the future. To use a 30mm drill bit, you will need to use That's all there is to it! I'll note " In addition to the holes (in my photo), there are also two holes for the dual The dual HDMI connector has a 38mm diameter.
piece connects perfectly to it and works well with it. It also looks great and works perfectly. I installed mine in a spare button hole on my front console dash (quite tricky), but it does what it's supposed to do. It was possible to relocate the BT box deep in the dash where there was more room rather than trying to figure out where to store it in relation to outlets. However, it would have been nice if the adapter head had been a little smaller and the diameter of the mounting plate had been a little smaller, but this is a great design that works.
As I am building a custom desk and I wanted an aux cable close to my desk, I was really hoping this would work. The good thing is I tested this before I began building the desk. You can only plug headphones or speakers into this device to play the right audio A silence can be heard on the left audio channel. Sadly, that's not good. This is what you get when you buy junk from China, I guess. I believe Amazon needs to put a filter on its search engine so that it can identify what countries things are You would be able to find quality products a lot easier if this was the case.
For my wife's Jeep stereo, we replaced the stereo with this so that the USB charging port and Aux jack would extend. I was looking for a way to extend the ports down to the storage bin on the center console, and found this. I drilled a hole of 1 1/8 inches into the plastic easily and mounted this The retention ring did not cause any issues for us as others have. It was a great addition to the stereo replacement to give it a professional look and no gaps.
The fact that this set includes all the hardware you need to do a custom install however you like makes it a great value. Drilling out a spot in your dash or using the bracket included in the package are both options. A few things to consider, such as the fact that this can be tricky to install, but it totally depends on your vehicle type and how you try to set it up. Installation problems have nothing to do with the quality of the product.
Also, it's important to note that 3. 7. 1 is the latest version of the platform. On this cable, the gold-plated connector on the 5mm male headphone connector ensures high sound quality and superior connections. I give it 5 stars for sure.
It looked as though this would fit on my wife's auto where we were going to upgrade to an Android Auto compatible radio using Wired solution for her auto. With no drilling needed and looking like factory parts, it fitted nearly perfectly in place of one of the power ports.