E-SDS 8-Way AV Switch RCA Switcher 8 in 1 Out Composite Video L/R Audio Selector Box for DVD STB Game Consoles CV0235
Score By Feature
OveReview Final Score
Product Description
Questions & Answers
The whole point of having a manual switch is that it is operated manually, so it lasts longer and is less likely to fail than automatic or remote-controlled switches. So you're using your finger to press the button on the remote control. It's a very straightforward procedure.
There are RCA output jacks on this device. So, ideally, a small amplifier with a headphone jack (like a Lepai or similar device) would plug into this device.
You won't be able to send one signal to all eight outputs at the same time, but you should be able to send it to any one of the eight ports. This is just a mechanical switch, and the electrons don't care which way they're going as long as they have somewhere to go. Two of these are stacked together in my setup, with one serving as an input switcher and the other as an output switcher. I don't require a high-speed Internet connection. My older sources don't have HDMI, so I can't use it. I'm importing from CDs, DVDs, TVs, LPs, Cassettes, R2R tapes, Game boxes, and even VCRs, and then exporting to any of the following: TV, DVD- OR (not AND) PC, R, audio amplifier, headphones, video processor My only caution is to make connections gently but firmly - This isn't a performance for profit. grade product- and, for the same reason, turn off any inputs you don't need right now to cut down on signal bleed- by way of other sources If this is too much of a hassle, you can easily spend hundreds of dollars on a device that does the same thing as this one but is built to withstand frequent road trips and on-the-go use. Abuse on the stage
Selected User Reviews For E-SDS 8-Way AV Switch RCA Switcher 8 in 1 Out Composite Video L/R Audio Selector Box for DVD STB Game Consoles CV0235
That is exactly what I was looking for. There will be no electronic devices. It's both electrical and mechanical (also known as electro-mechanical or electro-mechanical). (machinist). There is no need for any electricity. There are only switches on a small circuit board, input/output connectors on a small circuit board, and a ribbon cable connecting the two boards. There are no active components to fail, which is a significant advantage. Wires between switches and connectors aren't a tangle of spaghetti. Electro-magnetism has another advantage. Mechanical switching has the advantage of being able to select one output at a time when used "backwards" as a 1 In 4 Out switcher. If active electronics were used, you'd have to rename the outputs as inputs and the inputs as outputs, which you couldn't do. Some people may prefer to have level controls and some amplification. Not at this price, but there are some reasonably priced mixers on the market - That is essentially what they are requesting. Aside from that, all of my inputs (devices) Each of these outputs has its own set of controls. My only wish was for a switch to be flipped. The weight is the only drawback. It's not too heavy. It comes as no surprise to me that you'll have to either hold it down or attach it to something or weigh it down when you press a button. br> I noticed a few complaints about faulty units. I decided to take a chance and see what would happen. I could always trade it in for a functional unit, but I couldn't build one for twice the price, and 1- It's difficult to find four switches.
We bought this so that we could connect all of our vintage and modern video game systems at the same time, and it has served us well so far. If you have multiple systems that require RCA connections, this is an excellent investment. Modern televisions have a limited number of RCA ports, which are nearly impossible to reach when the television is mounted on the wall. All of our problems have been solved by this thing.
Issues with quality control, as well as parts of poor quality. To test the fit, I plugged in a cable and then unplugged it once, and the socket easily came out of the device with the cable. The socket is tensioned rather than soldered. I took it apart even more and discovered that all of the external screws were self-tapping and had been installed at odd angles. There were no issues with the two screws that held the switch PCB in place because they were machine screws into posts. On the switch pcb, a number of the switch pins were not soldered to the board and were floating freely in the holes. Overall, it is a cheaply manufactured product with cost-cutting measures that makes it difficult to recommend; all of the grounds between sockets in each vertical stack appear to be connected to each other, so devices connected to it would not be electrically isolated in the ground planes at any given time; and it is a cheaply manufactured product with cost-cutting measures that makes it difficult to recommend.
It's extremely useful when you have multiple gaming consoles but only one television. When switching between inputs, it works perfectly; I even built a small platform for it and pasted small images of the logos for each console I own above each button, which I think adds a nice touch. I would strongly suggest it!.
This does exactly what it says it will, allowing the user to switch from one signal path to the next. It's small in size, but it's packed with features like heavy switches and rubber grips.
Pros:
1. You can set it up to take an input and have two output options, or the other way around. (Being a non-powered device, this is an advantage. )br>2. Metal case with a strong gripbr>3. Cons: Non-powered (needs no power to operate)br>Non-powered (needs no power to operate)br>
1. The device may not sit flush due to its light weight and back cables. (This isn't a problem with the 8-port version)br>2. Non-powered (does not boost signals leaving the device)br>br>Conclusion: br>If you're short on RCA ports or, like me, need to switch between two output monitors, this device comes in handy. Its lack of a powered design benefits it while also hindering it, as it trades the utility of a signal repeater for the ability to move the signal in any direction the user desires. I also find its light weight to be a hindrance, as it doesn't sit flush after being set up. Overall, I would strongly recommend it, or at the very least its 8 port siblings, in any legacy AV setup because they're extremely useful.
I was concerned after reading the reviews that I had purchased a defective product, so I took out a screwdriver and unscrewed the four black screws to check that the cables were connected, and lo and behold, one of the circuit board's cables was partially unplugged. The majority of the negative reviews are most likely from people who didn't bother to look for this simple fix. Just make sure all four connectors are plugged in before testing, in case one or more came loose during shipping. It only took 30 seconds to complete the task, and it was flawless. Simply plug it in and go.
On my TV, I have one of these ports, as well as six videogame consoles that use this type of connection. It performs admirably as long as the cables leading to it and those leading away from it are in good shape. Another trick is to keep track of what's connected to whom and where. My brother used to make a small sign to hang on the switch box back in the day. I divided the information into categories based on the system's manufacturer and age.
I've seen some units with a rat's nest of wires, but the E-Series is not one of them. SDS 8- The PCB-mounted switches and jacks on the Way AV Switch RCA Switcher are connected by a single short ribbon cable. This should reduce crosstalk from one input to the other, as well as improve reliability. My additional thoughts can be found in the Q&A section. There is a section. I intend to purchase more items in the future.
Related Products For E-SDS 8-Way AV Switch RCA Switcher 8 in 1 Out Composite Video L/R Audio Selector Box for DVD STB Game Consoles CV0235
