Metra 95-7618G Double DIN Installation Kit for Nissan Sentra 2013-Up (Gray)

Nissan Sentra SR 2014, Nissan Sentra SR 2014, Nissan Sentra SR 2014, The color was a perfect match for my other dash components, and the deck I purchased was also a perfect fit. This is exactly what I needed for this project, and I didn't have to make any changes to make it work. The Pioneer mvh-II was the deck I used. 300ex. I was hesitant to order a deck online without knowing the hole's dimensions, but as you can see in the photo, it fits perfectly.

Evie Wilkins

| May 26, 2021

When compared to the original interior trim in my Nissan 2017 Sentra - this was the exact piece I needed to install the Double Din I received for Christmas, but the color was just slightly off (different finish too, more of a shimmer than a matte). I had a feeling it was going to drive me insane. However, I was able to spray it with ColorBond (197) Nissan Graphite LVP Paint ($20 on Amazon) and it came out almost identical! I'm very happy with my purchase, and I don't mind having to purchase the paint because the dash trim alone can cost $50 on other websites.

Lylah Booth

| Sep 29, 2021

Nissan Sentra 2016 There are numerous advantages and disadvantages to this approach.
Pros
It is for a Nissan
Its seems to be sturdy and durable
Makes the dash look factory
Seems to be% br>The color isn't quite right. br>It was a real pain to install and get the dash lines to match up.

Ariah Kirby

| Feb 06, 2021

This was purchased for a Sentra from the year 2014. The color match isn't perfect, but it's close enough that you won't notice unless you put them next to each other; however, the surface finish was terrible. It had a sandpaper-like texture to it. I used a scotch-brite pad to lightly buff it under running water. I used a bright pad followed by a couple coats of matte clear (satin may work but gloss is not recommended) and was pleased with the results. Plastic brackets for mounting the radio were included, but I chose to use the original metal ones. In addition, because the harness lacks one, it grounds the radio to the dash in this manner, just like OEM. The metal retaining clips were also not included in the trim, so you'll have to transfer them over from the original. br>br>**EDIT*
I later discovered the retaining clips, which had apparently fallen out of the package during the installation and been misplaced. They are, however, made of plastic, and I prefer the OEM metal ones. The plastic clips actually hold it in too well, and when I tried to remove the trim after a test fit, one of the mounting tabs cracked.

Robert Roberts

| May 10, 2021

My new radio will not fit into this bracket, and if I modify it by trimming all four sides, there will be a gap of nearly a quarter of an inch between the front surface of the radio and the inner trim ring, which sits back roughly three quarters of an inch from the front surface on all four sides. To make this thing work even a little bit for my 2013 Nissan Sentra with Pioneer DMH-100, all four inner corners of the inner trim ring would have to be squared off. 2660NEX is a radio station that broadcasts in the United States. If I have to make any changes, I'll use two black spacers on either side of my new radio to make it fit through the existing trim piece; otherwise, this trim kit was a complete waste of money. I'm going to give it back to you.

Aliana Patel

| Jun 27, 2021

Despite the fact that this is the recommended model for a 2014 Nissan Sentra, it does not fit my vehicle perfectly. It doesn't look great, but it's not so bad that I'm willing to return it.

Alejandro Norman

| May 12, 2021